I have a flash file that is pulling images in dynamically from a PHP page. The images will come in all different sizes so I need to resize them once they are loaded to fit in the containers that they are being loaded into...I thought onEnterFrame was the best way to do this? So I have the following:
Code:
onEnterFrame = function (){
for (i = 0; i < 9; i++){
[code].....
I can;t figure out how to do this. Someone selects and image after calling FileReference.browse(). I take that image and make a thumbnail in flash. Then I upload that image like so:
[Code]...
All this does it upload the original image. How do I change the fileRef to upload the new thumb? I have traced out the size of the "myThumbImage" and it is correct. I have placed it visually on the stage after creating the thumb, and it seems like it works. But when I upload it to an aspx page (that basically just throws it into a folder), it uploads the original larger image.
I have created a image cropping tool in flex using core copyPixel method.croppedBitmapData.copyPixels(croppedBitmapData, clipCan, new Point(0, 0));I have to crope area of dementions 20*20 and show this cropped area in an image of demention 250*350. Every thing going well.My problem is image distortion.Even i am using this method for smoothing image contents on complete.
private function smoothImage(event:Event):void
{
var bitmap: Bitmap = ((event.target as Image).content as Bitmap);
[code]....
i'm making a flash movie that's going to load some text from a text file. i don't know how long each of the variables within the text file will be though, so i need to resize the text box that they are going to be displayed it. is there anyway that i can do this so that all of the text is displayed and not cut off by the text box being too small
View 7 RepliesSo I'm having difficulty with this one, basically I am working on an XML image gallery.Load XML - with Image and Thumb paths in itoad thumbsWhen you click a thumb it loads corresponding image etc.When I load in the image I need it to load proportionally into a MC.This is the basics of how I have it at the momentCode: Select all box_mc.addchild(Image) // so it's loading into the box_MC which is H:300px W:500
if (Image.height > 300){
Image.height = 300;
Image.scaleX = Image.scaleY;
[code].....
I can't seem to get the re-size functions to trigger immediately. I call the function but it doesn't trigger until I re-size the window.[code]
View 2 RepliesI have a container with a vertical layout inside which I have two other child containers "A" and "B". n the first container "A" there is a component that I would like to resize dynamically based on the available display size. To to that I tried listening to the resize event of the main container and do my measures accordingly. That works somewhat until the parent container reaches a clipping size : container "B" gets clipped earlier than "A" because it contains much more stuffs : As soon as the parent container reaches "B"'s clipping size, it does not resize anymore (so no more resize event either) thus preventing me from updating my component's display in "A".
View 1 RepliesHow the resizing effect is accomplished. I generally use an HTML container with a 800 x 600 flash page but I'm interested in producing this full screen effect so I can control the background graphic elements. [url]...
View 1 RepliesOk, got a problem that's driving me up the wall. I have 3 objects: tab, tabShadow, (both movieClips) and menuText (a dynamic text field), all of which are themselves contained in a movieClip. What I'm trying to do is have tab & tabShadow resize based on how big the dynamic text field (menuText) is, and then align everything. The ultimate idea is to create a dynamic menu based on XML.
The problem though is that a) the textfield won't resize even if the amount of text fed it is too big, and b) because of (a), the movieClips won't resize based on the textfield. I also can't figure out a good way to align them (just making the ._x / ._y values equal puts the textfield way outside the other movieClips).
Here's the actionscript code, and I've attached a copy of the .fla (done is CS4, but saved in CS3 mode) just in case it's a matter of the centerpoint being off or something. This is all in the container movieClip.
[Code]...
I was wondering if anyone knew how to scale pictures when doing a website in FLASH. I am creating a flash based website for a friend. I have done all the links and it works greatThe only thing is that the images increase as the web browser is maximised.I would like it to decrease as the web browser is decreased, but to increase to a certain size 900 x 651, and stay that size no matter how big the browser is increased by.
View 1 RepliesDoes anyone know how to resize and move an Image with ObjectHandlesI need it to be as simple as possible.
View 2 RepliesI have been racking my brains trying to figure out how to do this but I can't! The two pictures I have given are different sizes to represent different browser sizes. The 'menu' stays the same size in the same position and the image/ greyblock scales proportionally to the browser keeping the same border sizes around the image.
View 2 RepliesI know that one of the most frequently asked questions is on how to resize a movieclip to fit the dimensions of an image.
My question is similar, but kind of inverse;
I need to resize an image to fit in an empty mc.
Code:
loadMovie("image/imageTest.jpg", mc_appImage);
mc_appImage._width = 190;
mc_appImage._height = 225;
There's my current code... the image loads fine, but does not rezie :/ What am I doing wrong? What do I need do to make this work?
how to scale pictures when doing a website in FLASH.
I am creating a flash based website for a friend. I have done all the links and it works great. The only thing is that the images increase as the web browser is maximised.
I would like it to decrease as the web browser is decreased, but to increase to a certain size 900 x 651, and stay that size no matter how big the browser is increased by.
This is what I am trying to create: [URL]
I prepared a galley for my client that should load an external image, re-size it and appear while it fades in smoothly from alpha 0 to 100 (motion tween).
The thing is that it looks like the re-size interferes with the fade in action (motion tween from alpha 0 to 100) and as a result, it stuck in the middle of the fade in action. If I load it directly to a single key frame (without any motion) it works properly.
I have attached the code I am using below and attached the FLA so you can see it in your own eyes (change the fla.txt to fla.fla so you can open it with you flash app)
ActionScript Code:
//
//set stage for FBF
var loader2:MovieClipLoader = new MovieClipLoader();
[code]...
I have a little problem regarding resizing in flash. I dont know if it is possible in Flash MX, since the image size is too large to fit in to my target MC, say 800x600 px pic, loaded into an MC which has a size of 160x130 px.in my MC, i want to load an image (pic1.jpg [800x600 px])loadMovie("pic1.jpg","holder")it loads into the holder MC(instance name), but in the end resizes the MC which destroys my design.All i wanted is to load an image into a "holder" MC which is located at the root, without resizing it. Say, if an image is 800x600 px, will resize depending on the MC where it is loaded. From 800x600 px to 160x130 px.
View 2 RepliesSo I'm having difficulty with this one, basically I am working on an XML image gallery.
Load XML - with Image and Thumb paths in it Load thumbs When you click a thumb it loads corresponding image etc.
When I load in the image I need it to load proportionally into a MC.
This is the basics of how I have it at the moment
Code:
box_mc.addchild(Image) // so it's loading into the box_MC which is H:300px W:500
if (Image.height > 300){
Image.height = 300;
[Code]....
So BASICALLY I would like to be able load in any size image and always make sure it resizes to fit H:300 W:500 but keeps its proportions.
I have a little problem regarding resizing in flash. I dont know if it is possible in Flash MX, since the image size is too large to fit in to my target MC, say 800x600 px pic, loaded into an MC which has a size of 160x130 px.[code]...
View 2 RepliesI need to create a designer tool in Flash for laying out how kitchen worktops/countertops look. I found something similar to what I need:
[URL]
If you scroll down the page you place a rooms dimensions onto the workspace, and resize it. If you notice, when you resize the shape moves and a measurement shows on each edge.
I am working on a site at the moment (product catalogue) for this company. I have a problem with the images i am using. It is taking too much time and effort to resize all the images in a photoediting programme. I was woundering would it be possible to automatically resize the images within my area. I have the images loading up within a layer mask. I was just wondering if it is possible to tell flash to set a true scale setting within the area mask. I have noticed while editing image size in photoediting programmes I do suffer from a fundamental problem. Even when I constrain the proportions within an image re-size flash dos tend to distort this a little.
PHP Code:
function setSubComboArray() { mySelectedItem = main_cb.getSelectedItem().data; title.text = main_cb.getSelectedItem().label; // trace(mySelectedItem+"/"+mySelectedItem+".jpg"); loadMovie(mySelectedItem+"/"+mySelectedItem+".jpg", "_picWin"); loadVariablesNum(mySelectedItem+"/"+mySelectedItem+".txt", 0);}
out with autoresizing dynamic img popups with javascript.
View 14 RepliesI have searched forever trying to find out how to do this. All the tutorials or answers I find aren't quite what Im looking for so I figure it would just be best for me to try posting.
What I want to do is load an image dynamically into a movie clip either created physically inserting it onto the stage or using .createEmptyMovieclip(). After the image has been loaded I want to be able resize the movieclip with the image inside of it, or somehow get the .height and .width of the image or the movieclip with the image in it and then have it resize keeping its proper dimensions.
Ex: I have an image that is say, 800x600. I want to be able to load that image in dynamically into 2 seperate movieclips (one being a main display, and one a smaller thumbnail).
[Code]...
FYI: I'm following the Flash Blogger tutorials listed on [URL] with Flash 8. I've noticed that everything works wonderfully as far as bringing the blog content into the dynamic text field; however, my only problem at the moment is Blogger will automatically resize my images, so it doesn't mess up the current template in html, but of course, Flash does not (out of the box).
I need a way to define the width & height of the images in the text field to fit inside the dynamic text field they're in. As far as I can tell, the tutorials listed on that site use an alternate method and don't actually resize them. Lastly, I thought about using CSS to adjust the img size, but from what I gather there are very few items at my disposal.
I have a gallery that I built from a tutorial I found online--it has an empty mc with a border around it, and when you click on a thumbnail an image is loaded into the mc and it fades in when it loads in and out.Ofcourse it works fine offline, but when I test it online the image will load in off-center, if you click the thumbnail again (after it has loaded the first time) it loads in the position it should be in. Here is the code I have on the first frame:
spacing = 1;
containerMC._alpha = 0;
MovieClip.prototype.loadPic = function(pic){
[code]....
I have a SWF that pulls in movie files. I need a way to detect the size of the file that is being pulled in and scaling it appropriately..
Code:
import caurina.transitions.*;
var conn:NetConnection = new NetConnection();
conn.connect(null);
[Code].....
I am trying to display a bytearray as a resized image. The Image is displaying correctly, but the sizing is off. Let me explain.
First I have the image data encoded so I need to decode the image data
// Instantiate decoder
var decoder:Base64Decoder = new Base64Decoder();
// Decode image data
[Code]....
This works. The image is displayed correctly. However, if I hardcode the image (img) height the resized image is shown correctly, but within a box with the original image's dimensions.
For example, if the original image has a height of 300px and a width of 200px and the img.height property is set to 75; the resized image with height of 75 is shown correctly. But the resized image is shown in the upper left corner of the img container that is still set to a height of 300px and a width of 200px. Why does it do that? And what is the fix?
The best way to illustrate the problem is by placing the image inside a VBox and show the borders of the VBox. From the code block above, if I change the image height and set the image to maintain aspect ratio (which by default is set to true but I add it here for completeness). the problem becomes clear.
// Display image
var img:Image = new Image();
img.height = 75; // Hardcode image height (thumbnail)
img.maintainAspectRatio = true;
[Code].....
package com {
import flash.display.*;
import flash.net.*;
[code].....
I have a UIComponent and inside it I put a loader (which loads an image file).
THE PROBLEM: Even though I resize the UIComponent(to a square), it will still follow the size of the image in the loader. But when I resize the image in the loader, it will become stretched. What I want to do is have a container(UIComponent) that has a fixed square size and after the image has been loaded it will just fit in the dimention of the container without being stretched.
I'm trying to resize a .jpg file that I'm loading in the loader class, and I can't get it to work. Here's the code I'm working with. (Note: I had to cut the URL to the jpg out because the forum blocks me from posting URLs with images!)
ActionScript Code:
getURL = new URLRequest("*URL to a jpg goes here*");
// Load slide image from URL
[code].....
I need to re-size the imgx attribute in the code below,at the moment image only covers half screen, I want to use to my desired size (full size)[code]
View 2 Replies
