ActionScript 3.0 :: Accessing Child Swfs Loaded In A Movie Clip?
Apr 29, 2010
I am building an interface that loads swfs externally into an array(pre-loader) my code places these swfs into a container movie clip on stage when called.I am trying to access the swf that is now a child of the movie clip so i can rewind, pause, and play the swf.Currently they are loading in just fine, but my code isn't able to touch the swf. The swfs also play all the way through when they are loaded so when i change to the next one of the sequence my swf is already at its end frame.
Here is the code:
Actionscript Code:
stop();//Variable creation-----------------------------------------------------------------var _swfLoader:Loader;var _swfRequest:URLRequest;//creates an array with all the swfs locations inside--------------------------------var _swfPathArr:Array = new
[code]....
View 9 Replies
Similar Posts:
Apr 29, 2010
I am currently building an interface that loads externally loaded swfs into a movie clip on stage. I have no problem loading them in and switching between them. I am, however, having an issue accessing the swf, so that i can rewind, pause, and play the loaded swf.
Here is the code:
ActionScript Code:
stop();
//Variable creation-----------------------------------------------------------------
var _swfLoader:Loader;
[Code].....
View 5 Replies
Oct 22, 2009
I am loading a swf file(As2.0) into my As3.0 application. The loading rocess works fine. I want to know how i can acces a button in the loaded swf through my as3.0 program. For example: i have a movie clip in my loaded swf called submit. In my as3 program i want to be able to wrie functionality foe the submit button.
this is my AS3.0 code
//------------Load swf into the application-------------//var mLoader:Loader = new Loader();var mRequest:URLRequest = new URLRequest("test.swf");mLoader.load(mRequest);gameLoader.addChild(mLoader);
In test .swf i have a movie clip called pressBtn. I want to be able to access this movieclip in my AS3.0 code. gameLoader is a movieclip on the stge of my as3.0 fla.
View 2 Replies
Oct 12, 2009
If I load an SWF file, is it possible for the pre-loader to access and change a string variable inside the loaded swf? Is there any special way to do this or would it be a simple case of loadedMC.variable = "new value"
View 3 Replies
Mar 16, 2011
If I load an SWF file, is it possible for the pre-loader to access and change a string variable inside the loaded swf? Is there any special way to do this or would it be a simple case of loadedMC.variable = "new value"
View 2 Replies
Mar 9, 2010
In my main swf I load preloader swf that contains two layers on time line. First layer is gradient shape and second layer is dynamic text field with instance name preloaderTxt that I am trying to access. Well I load it with success and in event complete I have this code:
Code:
preloader = new Sprite();
preloader = Sprite(loader.content);
preloaderHolder = new Sprite();
stage.addChild(preloaderHolder);
preloaderHolder.addChild(preloader);
I tried this:
trace(preloader.getChildAt(1));
trace(preloader.getChildAt(1).name);
First trace is: [object TextField]
Second trace is: preloaderTxt
But when I try to set its text property like this:
Code:
preloader.getChildAt(1).text = "test"
i get this error: 1119: Access of possibly undefined property text through a reference with static type
Code:
flash.display:DisplayObject.
View 2 Replies
Mar 1, 2010
I'm writing a card game in AS3. The artist I'm working with has produced (in Flash CS4) a single swf-file containing all the card graphics and animations. The structure of the fla working file looks something like this:
- Scene
- CardGraphics (Movie Clip)
- CardFront
- CardBack
- CardValueImage (Movie Clip)
In the program I create 52 instances of my Card class, each having a MovieClip instance created from the loaded swf. The idea is to set the frame of the CardValueImage MovieClip to correspond to the Card instance's suit and rank member variables. However, I can't figure out how I access CardValueImage and call gotoAndStop (or whatever method I will need to call).
[Code]...
View 2 Replies
Jan 7, 2012
How do I get to the MovieClips within an externally loaded Movie Clip. Lets say I have a movie Called ONE in the swf I just loaded. How can I work with it alpha, position and other properties of the children of this clip? CODE IN MAIN TIMLINE:
[Code]...
Now its loaded I want to change the postino of the clip called ONE in the movie LoadedMC I just created.
View 1 Replies
Sep 14, 2010
Imagine the following setup. The main swf loads a child swf.In AS2 i would simply use _parent or _root to call the desired function. How can that be done in AS3?Can this still be done? Can I call a function on the main swf from the loaded one? How about the other way around, this time, from main to loaded swf?
View 1 Replies
Sep 17, 2008
I'm attempting to use "if" statements to determine if an dynamically loaded photo is portrait or landscape. The problem I'm having is when I try "gallery_mc.getChildAt(0).width", it returns 0.
View 10 Replies
May 27, 2009
i am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
View 6 Replies
Dec 16, 2010
I have an Movie Clip in Flash that have subobject of button type which has subobject of input text and movie clips. Right after creation core Moveclip all subobject are set to null, when I expect them to be valid objects.
[Code]...
MC_Core_design was created in Flash and exported to Actionscript. I've done this for button_1 class aswell. The code was written using Flex. When I comment out both lines that result in error I get correct view of the core Movie clip with all subobject. How can I set subobject properties right after object creation?
View 2 Replies
Dec 19, 2009
I really have two questions: How do I affect both a movie clip and its child movie clip in the same function? and how do I pull info from one component into a function for another? My basic setup is a movie clip of font choices, one on each frame: "bodyText_mc." Each of these frames has a child clip "bodyText_mc.bodyText" with alignment choices for the font. For instance, the user picks "Script" in the first ComboBox and then picks "Align Right" in the second. (All of this text is static because I need more design control that I can get with dynamic text.)
First of all, I have a combobox "cbBodyFont" that I use to go from frame to frame on movieclip "bodyText_mc." This works nicely:
[Code]...
View 8 Replies
Mar 25, 2009
I have a picture on the stage that has multiple items that have hotspots/links over them that should open a child swf on top of the background and show details about the items. then have a button in the child swf itself that removes the child from over the background so the user can click on another item etc.I found this code in someone's post and I am trying to modify it so that works for multiple swf files...it currently works for a single swf.I wan to pass the name of the button in front of the .swf in the URLRequest to have the same name as the instance name of the referring button. But I can't figure it out. Here is the code I am using on the stage
View 2 Replies
Jan 3, 2007
I want to loop through a movie clip and assign a function to each of the clip's child movieclips. when i do a for...in loop and then do a typeof() trace I get "string" and obviously it won't let me assign lets say 'onRollOver' functions to the children.
View 6 Replies
May 23, 2009
How would you go about accessing a function or variable from a parent clip if the clip accessing has been loaded using the Loader() constructor in AS3?
View 1 Replies
Jun 25, 2009
I have an external swf (sub.swf) that loads into my main swf. The external swf has buttons of its own...that I would like to use to load additional external swf's in its place. I click on the buttons and nothings happens.
My current code is as follows:
All of the following code is in my main.swf
================================
//Location where the external SWFs will load
var Xpos:Number=18;
var Ypos:Number=10;
[Code]...
External swf has no code except for a stop action.
I pieced this current code based on various articles I've found on the net.
View 4 Replies
Jan 24, 2010
I'm loading movies into my parent movie, and i was wondering if it was possible to communicate between the two - so i could swap out other external SWFs (in the parent) based on input in the loaded movie.I'm still relatively new to Action Script, and have been learning quick, but i have been unsuccessful in my attempts so far.
View 3 Replies
Oct 23, 2009
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 Replies
Oct 7, 2009
I'm trying to access a variable from my main movie in a loaded movie. I can't get it to work however. The movie loads into the main movie but I can't access anything from that main movie. I see that there a few write ups out there about this, but I just can't get it. I attached a zip as well as the source below.
here is the main movie script
function mainTimeline() {
trace ("Just friggin work already");
}
var myNumber:Number = 5;
[Code].....
View 3 Replies
Feb 18, 2009
I've been trying to load a movie clip from a movie clip that has been loaded. I am trying to provide a simple means to change the look / feel of the flash application by placing the graphics and controls into a second swf. Each different screen is represented by a different movie clip that is in the second swf. So I've got app.swf loading ui.swf. I want to load screen1_mc from ui.swf.
The app.swf is loaded by a master swf. There may be multiple copies of the app.swf that can be loaded by the master.swf and each app.swf could be configured differently. For each "unique" app.swf it is stored under a unique folder that is not known to me in advance. Since I don't know the unique folder in advance, I can't use import / export for runtime sharing. Is there any way to load the movie clips from the loaded movie clip? (Basically, I want to treat the ui.swf as an extension to the library.)
View 0 Replies
Mar 16, 2005
I'm working on a flash site and I'm having some trouble with the programming for it. I'm not so great at action script, so I'm hoping that my troubles are caused by my own stupidity and that some cool smart person will have an answer for me.
So, I have a main menu flash file that functions like the one in this tutorial:
http://www.kirupa.com/developer/mx/p...transition.htm I set it to load various swf files and it's works just fine. What I want to do is have it load a swf that functions exactly the same (buttons that load external clips with transitions) as the main swf- this is a sub page menu. So, in theory, the sub menu page should load the final content, and three swfs would be seen stacked ontop of each other.
I changed the instance names in the sub menu file to be different than that in the main menu file. This fixed the original problem of it loading the content clip into the clip that the sub menu should stay in. Now, It loads the sub menu just fine, but then it gets stuck and never loads the content. The sub menu buttons will not function at all. Independent of the main menu, the sub menu file works perfectly What can I do??? Does it have anything to do with the "_root"? I never understood the concept, so I'm having trouble with it.
View 5 Replies
Feb 24, 2010
I'm running into an error accessing a movieclip from a loaded swf. Inside of my loadedMovie.swf file, I have a movie with the instance name of "bg". I want to change the width of that to movie clip when it is loaded into the parent movie but I'm getting an error saying "Access of possibly undefined property bg through a reference with static type flash.display:Loader."
Code: Select all/* ---------- LOADER ---------- */
var myLoader: Loader = new Loader();
myLoader.load(new URLRequest("loadedMovie.swf"));
[code].....
View 4 Replies
Aug 30, 2009
I've got a simple ActionScript 1 FLA. The SWF will take incoming variables from SWFObject. e.g. txtVar01, txtVar02, txtVar03 On the first keyframe on the main stage, I have a dynamic textfield, whose 'Variable' name is 'txtVar01'. When I view the SWF in a web page, via SWFObject, the value in the textfield matches that taken from the SWFObject variable. BUT - I have a MoveClip in the FLA, which has 2 other dynamic textfields, called txtVar02 and txtVar03.
When I view the SWF in the web page, these are empty, even though variables are being passed via SWFObject. I guess because the dynamic textfields are within an MC and not on the main stage, they can't access the variable names. I tried adding this to the first frame on the stage:
[Code]....
View 2 Replies
Apr 26, 2010
I have the following prob :
I created several instance of the same MC like this
[Code].....
View 1 Replies
Nov 24, 2005
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 Replies
Jun 23, 2010
import com.hydrotik.queueloader.*;
.................
public class Main extends MovieClip
{
[code].....
I need to get access to loaded STRATTransitions.swf from the main movie and remove some text from it. There is no source code available for the swf.
View 1 Replies
Nov 14, 2010
I have a movieclip in stage with instance name 'ts'.
I have a class Test.as
How should i refer to MovieClip 'ts' in stage from my Test class. Say for example I want 'ts' to gotoandstop at frame2.I tried root.ts but received a error.
View 4 Replies
Oct 31, 2009
Setup:
*Scene 1:
- MovieClip1
[code].....
View 8 Replies
Nov 4, 2009
What is the code to make you jump to a "Label" in a parent movie clip, when clicking on a button.Lets say the buttons name is push_btn and I am in mc2 and the label is located in mc1.
View 8 Replies
