ActionScript 3.0 :: Advanced Buttons - Play The Exit Animation When Rollout
Feb 5, 2010
I have a button that looks like this: [URL] so when you rollover, it plays an animation, and when you rollout, it plays the exit animation. And if you rollout before the the enter animation is over, it will jump straight to the exit animation. the swf right there works perfectly, exactly how i want it, so i popped it in as2 and it will not function, so I decided to come here, I need to know how to do this is as3. how can i make this work in cs3?
View 3 Replies
Similar Posts:
Feb 17, 2010
I'm building a website using actionscript 3 with an animated intro and it has 8 movie clip buttons called Tab1, Tab2,etc. which when clicked navigate to different URL's. I would like play an exit animation (frame 300) on my main time line when a button is click and then goto the url page.
View 7 Replies
Apr 23, 2008
I'm trying to get the animation of this actionscript to pause on RollOver and then play again on rollOut, but no luck so far.
Sample file is attached (FLASH 8).
View 11 Replies
Feb 9, 2005
I have been trying to build a navigation that has a rollout animation but functioning internal buttons. This navigation uses the theory I'm trying to recreate, it seems simple enough but I can't figure it out for the life of me![URL] I tried this variable, but it renders the internal buttons undetectable and is very unstable midanimation (if you rollover it while in transit, the button goes crazy):
[Code]...
View 3 Replies
Apr 28, 2010
I created a simple flash movie for a client that loops 3 times. At the end of each revolution i want to add a button that will pause the main movie action and reveal a small pop-up for legal copy when the user rolls over it, then re-start the movie again once they roll off it - however, it will only do this when the user interacts with the button, if they don't touch it, the movie will continue through the 3 loops unimpeded. Side note: I cannot use pause and play buttons, it needs to be a simple rollover/rollout function.
View 2 Replies
Jun 19, 2004
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
View 4 Replies
Apr 15, 2011
I'm trying to create an animation which involves play and pause buttons, i've tried following the tutorial but because my animation is on many different layers it won't work.
View 1 Replies
Jul 29, 2008
simple one this, or so i thought! basically, i want a mc to play from start to finish (11 frames) upon rollover and upon rollout i want it to play backwards to the first frame. Accurately.
ActionScript Code:
on (rollOver) {
if (activ.currentFrame <= 11)
{
[Code]....
Currently i JUST goes to the next frame. So i need something like currentFrame +1 or something?
View 7 Replies
Apr 3, 2009
I'm trying to create flash rollovers for buttons that play the full rollover animation even if you roll of it, and if you stay on it if will play once and not keep repeating. The rollover animation is only short, about 2 seconds, but which ever way I try it I can't get it to play the full clip if you roll off, either that or it will play the full clip but keep repeating if you keep the mouse on it.
At the moment it is just a movieclip in a rollover keyframe of a button.This has stumped me for years. Other sites seem to do it fine (off the top of my head the 4 menu rollovers at the bottom of http:[url].... do it - if you rollover each one left to right in one go they do a kind of Mexican wave) but I just can't see a way of doing it.
View 4 Replies
May 4, 2011
I was looking for a way to create play, stop, rewind and fast forward buttons for an animation I created in Flash. I found a nice description at republicofcode.com/tutorials/flash/controller_bc/, but after trying the code for stop and play I get the error: Access of possibly undefined property onRelease through a reference with static fl.controls:button.
stop();
play_btn.onRelease=function (){
play();
}
[code]....
View 6 Replies
Oct 21, 2010
I am primarily a programmer, a games programmer by trade who happened to pick up Flash on the side and later through a series of coincidences became a full time flash developer. Most of my work thus far has been code heavy, and has focussed on such things as interacting with web services, localization with xml files, flash video, streaming video, networking etc.
My employer recently lost one of its contractors who built a lot of animation heavy flash apps for them, and as I know my way around the Flash IDE quite well, and have created fairly complex animations in the past, they have asked me to assume a more animation orientated role. To this end, they have offered to send me on courses to get up to speed with Flash animation.
As I know probably 90-95% of Flash's capabilities, and am comfortable with animating / easing / masking / filters / tweening and how to produce these effects programmatically, my interest would lie in a course that teaches fairly advanced uses / best practices of flash. For instance, I find that there are many ways to do things in Flash, but only a few approaches that will get you there without the entire IDE coming to a grinding halt (shape hints is a good one, or perhaps an approach has forced you into a corner with many tweened animations which now need a small alteration made to all of them).
View 5 Replies
Mar 29, 2010
How can I play a play a different video when exiting a frame?
View 1 Replies
Jul 29, 2003
I'd like to know if there is a way to do the following: have a movieclip to act as a button, that is:
have an "over" and "out" states but at the same time have another frame that is used to have an "active" state when clicked. The problem is the following: since there is a rollOut state defined, when clicked the mc jumps to the active state (frame) but returns to the out state when cursor moved out of it of course...so...how do you have a button with, over, out and active states?
View 5 Replies
Jun 5, 2007
I am working on a flash site where I want the buttons to animate on Rollover and reverse animation on Rollout. Here is the code I am using at the moment.
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse, true)) {
this.nextFrame();
} else {
this.prevFrame();
}
This works fine but I would like to go one further. Is there a way for me to make the Rollout animation shorter?
So if the button animation is 60 frames long can the Rollout animation occur from say frame 30 on Rollout? The play head needs to jump to frame 30 on Rollout and I have no idea how.
Of course if the playhead is only on frame 20 then on Rollout the animation will reverse from frame 20. (not from frame 30).
This way the Rollover animation will be the focus and the Rollout is...well simply a Rollout animation. Short and sharp.
View 2 Replies
Dec 30, 2009
I have looked all over internet and so many different forums but no1 has the answer yet but here is what i rly wanna do in AS2 :
lets say i have a button(which is a MovieClip and not an actual button) tweening in size to 150% from frame 1 to 40 and then another tween sizing it back to 100% from frame 40 to 80. Then when some1 Rolls Over the button you see this animation going in a loop from 1 to 80 and again and again etc. BUT i actually want a Roll OUT that finishes the animation to frame 80 (even when some1 rolls out on frame 10 or so) and then returns to and stops on frame 1.
This seems quite easy to me and i used several stuff including currentframe etc but i cant make it to work.
View 8 Replies
Nov 12, 2009
I am a complete novice in Flash and action scripting, but i'm trying to create a button for a website that simply fades in on roll over and fades out on roll off. I've successfully managed to make the roll over effect work, but i'm struggling to figure out how to reverse the animation on roll off.
View 4 Replies
Jun 20, 2006
Here is what I would like to do: I have some buttons, then 2 movie clips named container and container2. When I click on a button, an external SWF is loaded into container. I have it working so that when another button is clicked, it plays the exit animation of the current SWF, then loads the new one. Here is the code that I used for that: on a button:
Code:
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "who";
[Code].....
What I would like to do, is have a button in who.swf, that will load another external swf into container2, while leaving who.swf in place. Then, when one of the main buttons is clicked, I would like it to play the exit animation of the swf that is currently in container2, then play the exit animation of the swf that is currently in container, then load the new swf into container.
View 1 Replies
Aug 13, 2007
I have made some advanced buttons and want to use then to navigate to a different frame in the site this is what have
b1.onRelease = function() {
this.gotoAndStop(10);
View 1 Replies
Aug 22, 2003
I have tried out on the advanced roolover buttons in this tutorial [URL]. But the problem now is tat I have a button a red crab when I rollover it it will become a crab grey button. I have 2 separate buttons for the crab. While basically the grey crab button's animation lies in the same movie clip as the word tween. So what I want is when I roll over the red crab it will display the grey crab, and when i roll out the grey crab will fade away to the red crab. And also when I clicked on the grey crab when the mouse is hovering over it it will open up another movie clip. There's also some mistake with the grey crab it only seem to be working when it is in graphic but want I want is a button. I can't assign ant actionscript codes to it if it only works in a button.
View 1 Replies
Sep 28, 2002
I have two scenes setup where the first scene has a preloader that works great - here is the catchy part though - my first scene (where the code is) is 140 frames long and the second scene is over 400 frames - once all of the frames have been loaded from the second scene the first scene JUMPS to and plays frame 1 of the second scene, reguardless of where the playhead is in the first scene - what I want it to do is once the second scene has been loaded I want the first scene to play all the way to the end (frame 140, scene 1) of the first scene and THEN going on to the second scene (frame 1, scene 2)giving my sound and animation a smooth transition over.
View 10 Replies
Feb 3, 2010
I would like to have a sound file play when the playhead reaches a frame and then stop when the playhead moves to another frame.
This is the code I currrently have in the frame to play my sound (sound_1) - works fine, no problems.[code]...
View 4 Replies
Jul 26, 2006
I have a navigation bar with a series of buttons on it. When you rollover any other these buttons there is and action on them saying :
on (rollOver) {
this.gotoAndPlay("over");
}
on (rollOut) {
[code]....
Now I want to create some AS that when a button is click and disabled and then the user clicks on another button all buttons will reset themselves and play "out" if they were previously clicked (enabled=false)So in the end I am just looking to say "Hey flash if a button 1 is clicked and disbaled and then button 2 is click then button 1 needs to enabled itself and play "out".
View 13 Replies
Nov 27, 2006
I have 6 buttons aligned horizontally. When I press one button, I want all of the buttons to move to different _X positions with easing that would be specified in an array or in a variable. I'm looking for the easiest code. I had the code and a fla. for this a few years ago when I was deep into Flash, mastering actionscript. Now, it's like starting over.
Also, can anyone assist me with a similar, more advanced code? It's the same as above, but when one presses a button, that button pressed would move to a specified _X position, and the button that was previously in that _X position would get back in line, to the far left of all the buttons...
View 5 Replies
Dec 25, 2006
I've just finished making advanced rollover buttons, but I just realized that apparently, I don't know how to link them. Can someone explain to me how to link rollover buttons and exactly where to place the code?
View 2 Replies
Oct 13, 2008
*trouble with gotoandplay and roll out functions* basically i have an after effects movieclip (followed the after effects button tutorial on this site) that i have made into a button. it works ok on rollover and rollout i use tweener which works a treat and when i click it goes to another frame and plays a small sequence of smoke exploding.
problem: its a look problem really. when i rollout the smoke click sequence tweens back to frame 0 as per my rollout instructions IS there a way for me to have the click smoke sequence play all the way through before going back to frame 0 on my rollout ? i see tweener has a oncomplete statment is that of anyuse? ive tried a few thigns but it always reverts to the rollout and reverses the footage.
[Code]...
View 6 Replies
Nov 1, 2004
[URL] i want the white box to close , when another button is click. Its pretty much similar to the TRANSITIONS TUTORIAL. Here it is : [URL]
View 3 Replies
Aug 25, 2004
Im trying to write a global fucntion for button rollOver, rollOut animation.
here's what I have as of right now.
On the root timeline::
stop();
function buttonFade(fade) {
if (fade) {
[Code]....
Im still wishy washy on function syntax..
View 11 Replies
Jul 4, 2003
I created a MC that will play when you rollover a button and play again on rollout. Here comes the problem. If you rollout this MC before the animation comes to stop, it will stop at the stop point and won't continue playing until you rollover again which then looks (and actually is) as a bug.
View 3 Replies
May 4, 2009
I have a simple graphic in Scene One which when you mouse over it, it changes to Scene Two where there are several round buttons that people can navigate with. What I want is that when the mouse is dragged away from the stage where the buttons are in Scene Two, you are taken back to Scene one. I can't seem to work this out. I only to want to go back to Scene One when the mouse is completely out of the SWF.
I made another button and made a square hit point that covers the stage and put that on the level above the other round button levels but this then doesn't allow you to activate and click the buttons underneath the square button. I just want a rollOut when the mouse comes completely off the SWF back to Scene One. Am I missing something?
View 2 Replies
Feb 6, 2010
I would like to have a button animate on roll out, so if it fades to a color on mouse over it fades back on roll out. I understand you cant achieve this by putting action script on the button (well maybe you can) but is best achieved by placing action script on the frame and giving the button names etc.
View 1 Replies
