I am having this problem with my movieclips. One is container_mc and inside it is picture_mc. They both have drag and drop functions. Container drags when it is clicked...but when I try to drag and drop picture_mc, I end up dragging the whole container itself. picture_mc is inside container_mc.
View 7 RepliesI'm using Flash CS5, and was wondering if this situation is possible:
I want to drag and drop an object to a specific area (which is a picture), and then the picture will change if the object is dropped at the area of the picture.
And I have one more question. Must drag and drop an object be in movie clip? I searched for examples and almost all use movie clip, a concept I have yet to understand.
I need a way to drag and drop an image from a container to another. I have tried a few different ways but I guess the drag & drop thing is still eluding me. Anyway, here's what I am trying to do, A container will contains a few bitmap/vector image (what's the best way for this? Tile Group? Or?) and then I want to be able to drag any of the image onto another larger Image inside of a Panel. Just like dragging shapes in Photoshop. No code here, as I am completely lost on how to go about it. I found a few tip/tutorial here and there but none which I could understand easily or adapt to my need.
Edit 1 : Got so far till now :
public function beginDrag( mouseEvent:MouseEvent ):void
{
[code]....
I added a movieclip and named "bot_mc" in another movieclip. Then, In Action panel, I use bot_mc.addEventListener(MouseEvent.DOWN, xxxx). However, when I drag and drop the container movieclip on the main stage and compile. There is no error occurs but the MouseEvent doesn't work.
View 3 RepliesI am creating an flex Air project,so mxml file will run. I have circles in one Big circle at one side and will be same on other side.
Now how to drag any circle from any Big circle to other side. Or it could be like any two container having circles, then how to drag and drop circle?
For one circle i am able to do drag and drop.But I want one Big circle on left hand side and one big circle on right hand side .And small circles with class names will be in these big circles.Now i want to drag and drop those small circles in big circles.Big cicles should not move. Even i have tried this code in actionscript
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;
[Code].....
But in this i want big circles should not move and small circles should only be dragged.
I'm trying to make a simulation where a person can drag 2 different objects to any 4 predefined targets on the stage. Based on the position of the 2 objects there will be a different output text. I hope I described that clearly. I would also like the 2 objects to snap to the 4 targets. Im very new to AS. Im starting to be able to read it a bit but still can not wright it.
View 9 RepliesRelease to Drop NOT WORKING on drag and drop? Or is it something else?Can be seen here:
[URL]
Code:
var origX:Number;
var origY:Number;
for(var i:uint=1; i<6; i++){
this["choice_"+String(i)].buttonMode = true;
[code]....
i want to make flash drag a ball onpress and if its onrelease and if its on the Suquare movieclip it should stop draggin. my code is like this
[Code]...
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
Im having trouble with this and its going wrong. I need to use actionscript 2 and im on flash cs3.
View 3 RepliesIm trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
Wen i drag mc2 i want mc1 drag in the same time.
View 1 RepliesI have added drag and drop to some of my custom components.The drag event is fired on mouse down.If you mouse down and move the component around then drop it repeatedly its fine.But if you mousedown and drag the component around drop it and THEN just click on the component it inits the drag but doesn't fire the drop event.Its almost like you have to move the component for it to fire the drag drop event.This is very annoying as i'm removing the component on drag init and adding it again on drop, so just clicking on it makes it disappear.
View 1 RepliesI have a code that duplicates a movie clip that then falls across a picture. They are sort of like water drops on a window but I want the picture to only be seen through the water drops. My problem is I can't get more than one drop to mask the picture at a time. I have tried code in the duplicated MC and I have tried pasting a bunch of instances to the stage and creating a mask later. Please help me out. The following is the code of the duplicated movie clip where _root.drop is the falling mask and _root.bg is the picture I want to see through the drops.[code]
View 1 RepliesI have produced a Flash movieclip, containing a fair few layers, including masked layers, actionscript etc. One of the things it does is allows the user to click and drag a number of movieclips and drop them anywhere within the mc, but if they drop them on specific drop targets then some actionscript kicks in, stops the drag object from being draggable again and advances through its frames to basically 'enlarge' the drag object and play a sound to show the user they've hit the right mark.
This all works perfectly on its own, or in a browser window etc.
The problem I have is when I try to insert the Flash movie into an Adobe Captivate 4 e-learning package. Things work ok apart from when you drop the dragged object onto a drop target, nothing happens. The actionscript doesn't execute.
Would the fact that the movieclip is (probably) sitting within a container (the Captivate e-learning package)? If so, how do I get around this issue?
I have produced a Flash movieclip, containing a fair few layers, including masked layers, actionscript etc. One of the things it does is allows the user to click and drag a number of movieclips and drop them anywhere within the mc, but if they drop them on specific drop targets then some actionscript (AS2) kicks in, stops the drag object from being draggable again and advances through its frames to basically 'enlarge' the drag object and play a sound to show the user they've hit the right mark. This all works perfectly on its own, or in a browser window etc.
The problem I have is when I try to insert the Flash movie into an Adobe Captivate 4 e-learning package. Things work ok apart from when you drop the dragged object onto a drop target, nothing happens. The actionscript doesn't execute. Would the fact that the movieclip is (probably) sitting within a container (the Captivate e-learning package) be causing the problem? If so, how do I get around this issue?
How can I alter this AS from a thread here into something where the person drags the thumbnail to a certain movieclip on the stage(say a red X), then the big actual image loads into another movieclip on the same stage. So basically instead of dragging the thumbnail to on top of the already loaded image to load the new thumbnail, the new thumbnail will be dragged to a different area (the red X) to the left of the already loaded image. If it isn't dragged and dropped on the certain area (the red X) then it eases back to it's thumbnail spot. [URL]
View 14 RepliesHow can i alter this AS from a thread here into something where the person drags the thumbnail to a certain movieclip on the stage(say a red X), then the big actual image loads into another movieclip on the same stage. So basically instead of dragging the thumbnail to on top of the already loaded image to load the new thumbnail, the new thumbnail will be dragged to a different area (the red X) to the left of the already loaded image. If it isnt dragged and dropped on the certain area (the red X) then it eases back to it's thumbnail spot. This is the thread im talkin' about: [URL]
I uploaded a visual example of what im talking about.
good tutorial for drag and drop quiz style? I have managed to actually create the drag and drop but I need it for a quiz (as quiz templates are no longer available past CS3) so need it to tell the user if they are correct or not i.e. drag a word onto a picture and then hit a button that says if its correct or not or something similar.
View 4 RepliesI want to make a picture gallery and use buttons that move you from picture to picture and backwards, but I don't want to tell button 1 to go to frame 2 and button 2 to got to frame 3 and so on (I hope you know what I mean)Can I use on button on a separate layer with the same action set? I tried something like that, but it didn't work:
on (release) {
thisframe =+1
}
[code]........
but it didn't work. I'm kind of new to any action script other than gotAndPlay, easy functions and all that.
When you drag the edge of container with mouse ,how to implement changing the size of container?
View 1 Repliesi have this code on first frame
[Code]...
i can draw with mouse all over stage..but when i import image (handball field) and drag picture on stage i can only draw beneath this picture..my question how can i reference in AS3 code to draw on that imported picture..i wanna do something like whiteboard for coaches so they can draw actions for game..
I downloaded a free flash menu component. It's help file said "You can simply drag and drop the menu items wherever you wish".However, I don't know how to drag and drop it in my file. please help me, how to use it?
View 3 RepliesI have this enter_frame listener to make my Container MovieClip rotate on a 3D environment in relation to the position of the mouse.
PHP Code:
addEventListener( Event.ENTER_FRAME, loop );
private function loop( e:Event ):void
{
var distx:Number = mouseX / stage.stageWidth;
[Code]....
One of the MovieClips I load into that "ctt" container has some scrollable content. I've traced both the CLICK and MOUSE_DOWN events on the Dragger of the scrollbar and it's active, it receives the click and mouse_down events. The problem is that it doesn't drag.
I know that the scrollbar works because if I remove the loop enter_frame event I showed before it works perfectly, it just doesn't rotate on a 3D environment as I wanted it to.
why the dragger doesn't drag when that ENTER_FRAME event like that is being used?
I am developing a simple drag and drop game..except my draggable items are in a movie clip and my targets are also in a movie clip. My draggable objects work fine, they drag and snap back into place when the mouse is let go, but... they dont snap to their targets.They do snap to their targets when they are directly on the timeline, but inside another movie clip it doesnt work and i can't figure out why.[code]
View 1 RepliesBasically, there will be two images, which participants are to choose between. Below the pairs of images will be a horizontal bar with arrows at both opposite ends. I would like the participant to be able to drag and drop a small rectangle somewhere along the bar to represent their choice (and the degree of their endorsement).Basically, I'm asking how to make an interactive scrollbar on its side (without buttons, just the drag). I would also like it to start in the middle of the bar and be able to be moved in either direction.
View 2 Repliesusing 'drag and drop' in flash without overlapping?
For example - I have a list of buttons i drag to an area on the stage. I do not want my buttons to overlap.
I've dynamically created a bunch of MCs from a single MC in the library.
Inside the MC's timeline, I have written drag and drop code.
The MC's reside in a parent movieclip, that then resides in a scrollpane.
I was wondering if it's possible to write AS3 to drag the clips into another movieclip?
If not the way I have it, is it possible at all to drag MC's from one container MC to another?
I am trying to do a flex drag and drop. It is very similar to this first example.url....The problem is that event.currentTarget.mouseX,mouseY is showing the position where I put the mouse down rather than the position where I had finished dragging.
View 1 RepliesI am trying to create an elearning exercise and i have a problem with the drag and drop section i have created. The exercise works well but when the user clicks the next button to go to the next frame one of the drag elements from the exercise shows up on the next frame and i just can't work out how to get rid of it?
View 0 Replies