ActionScript 3.0 :: Change String Variable To A MovieClip Variable?
Oct 10, 2008
I have been banging my head against a brick wall regarding the following problem which must be very simple to fix, just can't see the answer.I have a class assigned to a movieclip called canvas. The class is called drawClass. I have called the instance of canvas on the stage 'drawingCanvas'.When I trace "drawingCanvas" I get object drawClass] which is fine. Tracing drawingCanvas.name gets me the instance name 'drawingCanvas'.This is a String variable.Basically what I am trying to do is pass the MovieClip name to another class. In my example the class 'toolBar', which can then interact with the MovieClip.
The problem is passing 'drawingCanvas.name' results in a String, so I get an error saying :TypeError: Error #1034: Type Coercion failed: cannot convert "canvasArea" to flash.display.MovieClip.I can't for love or money find a way to convert a String variable to a MovieClip variable! I have the name of the MovieClip, I just need to tell the toolbar class. But I can't find a way of doing this as the instance on stage is an object of drawingClass, not a MovieClip (unless MovieClips with attached classes are not treated as standard MovieClips?).
What is the best way to listen for and trigger a function when a string stored in a variable changes? I have a variable named source which is a string. When its value changes I need to run a function newVideo. What's the most efficient way to detect the string has changed?
I have a large block of code in frame one of a movie. It executes, then the movie progresses to frame 2 and stops.I then have buttons at frame 2 that change the value in a string variable and send the movie back to frame 1 where it executes the code with the new value and proceeds to stop in frame 2 again.How can I eliminate this use of frame 2?How do I set it up so that I just re-run the code when the variable changes?I assume I can put all my code inside a function that gets called when the variable changes.
My question is, how can i cause any of these events to change a string variable in the main timeline? For instance, i would like the news_btn when clicked to change already defined variable located in the main timeline. Also, is there a more elegant way to code the above, i'm new to AS3?
I would like to make a dynamic button on a website I am working on. I would like one button to update a variable, and another set of buttons to add 1 or subtract one from the variable I have buttons on the left side of the page for some bands that load conent into an empty movie clip.
The website: [URL]
I would like to set up some forward and backward arrows above that content on the right, so users can also scroll through the content in order. So if someone loads the content for soul asylum, and click the back arrow, it goes back to the Wailers, and if they click the forward arrow, it goes to Swollen Members. So there is an order of pages: 1. Wailers, 2. Soul Asylum, 3. Swollen Members, 4. Passafire, 5. Beats Antique, 6. SFM Kind of an order of importance. The idea is if somebody starts by clicking #3 Swollen Members, my application will know that it is on #3 and the arrows will go to #2 or #4.
Is there a way for the main artist buttons on the left to reset a variable for the current slide? So if someone clicks on the Swollen Members picture button, a variable called currentselection equals 3 And then when the forward arrow is clicked, it will ad 1 to the current selection and load movie #4
So in VB the main Swollen Members button would be something like: im currentselection as int = 3 Which would reset the current page as 3
Then the forward arrow would have code like:
Dim Nextselection as Int Nextselection = & currentselection +1 & ".swf"
And the button in flash would be something like:
on (release) { loadMovie("Nextselection", "rightcontent_MC")}
I am building a project where I got XML text displayed on a textfield. How can I change a specific word's color through actionscript 3 instead of doing it on XML? I though of creating a String variable for my word and then using that variable in my textfield.text, it works but is it possible to set a color for that variable?
how you would target a function's local variable through a concatenated variable string.For example:
var txt = "Hello World"; function testing(msg) { var test1 = msg;[code].........
I'd expect the trace to be "Hello World" but rather is given "undefined". So if variables created outside functions are created on the main timeline, where are local function variables created and how would you access them?
i'm getting a value from a class that gives me e.g "icon1" as data. i want to use this within a function to control the visibility of an item nested in a movieclip on the stage. the nested movie has the same name as the data being sent.
// here's what i want it to do: mymenu.icon1.visible = true; // but i cant append the 2 together as flash will see it as a string not read it as path.
I'm trying to reference a variable of type String as a MovieClip that is linked from the library. For example, I have a linked library movieclip called HomeFrame, in my class I have a variable with "Home" and need to create an instance of HomeFrame based on the string I receive.[code]
This is sort of difficult to explain but I'll do my best. I've got 6 score variables that go up over time.
[Code]...
Each corresponds to a different color of "Monster" class I reated. "GreenMonster", "BlueMonster", etc. are all custom classes. Each class has a string property called "MonsterColor". So "Blue1.MonsterColor = "Blue".
To save lines of code, and learn, I'm trying to use a local string variable to take the place of whichever of these 6 int variables I need. So inside a for loop, I've created a variable called "colorscore".
I would like to dinamically create array variables, depending on a XML file. The problem I have is that I don't know how to create them dinamically using a name I have constructed into a string variable. What I would like is something like this:
var strVarName; ... strVarName = "Var" + i; var strVarName = new Array(); ...
So I would have n arrays called Var1, Var2, ... Varn.
I have a varible on the timeline, named "pressedleft" and i have a movieclip named animate, and within that movieclip i have another one named animate_move, on the last frame of animate_move, i want it to make pressedleft = false; but i cant seem to figure out how this is done :s
I want to declare a variable on the main timeline that can be called from anywhere in my movie. So, _global var should be the right approach. I want to declare a movie clip 'MC1' "open", or "closed" so that when it is revisited, my flash file knows the user has been there before and performs a different task from the one it does when 'MC1' was first encountered. So, i need a 'if' statement to run from the variable, when the playhead encounters the movieClip.
I'm creating a board game which has 3 variables, p1Move, p2Move and activePlayer. p1Move and p2Move store the p1 and p2 location on a game board. activePlayer stored who's turn it is at the moment.
I am loading a value in from a text file which changes the value of move. This all works fine when i designate a player directly:
so that flash changes the value of p1Move (or p2Move depending on who's turn it is) to varAmount. varAmount is the variable being read from the textfile.
Hopefully that all makes sense. Basically i want flash to change the variable associated with the active player only.
I have a String variable in my flex (flash builder 4) application containing CSV data. I need to allow the user to download this data to a local file. For example, giving them a "csv" button to click and it might present them with a save file dialog (and I would be sending the contents of my string variable).Is this possible / how ?I am using the ResuableFX component for the datagrid to csv. This the code I ended up with that works to save the string to a text file for the user (in a web browser):
var dg2CSV:DataGrid2CSV = new DataGrid2CSV(); dg2CSV.includeHeader=true; dg2CSV.target=adgEncounters;
Trying to replace a portion of a string with a "-" if it matches a string variable in AS3.
var re:RegExp = new RegExp(imageArray[j][1],"gi"); trace(imageArray[jTemp][2].replace(re,"-"));
imageArray[jTemp][2] is a string imageArray[j][1] is a string as well I'm not getting the result I expect. I would like trace above to return 'permanentContainer-' Here are the traces for the above variables
i have a variable take away another variable which makes answer1 variable i then want answer1 to be to the power of another variable how can i do this in flash
Im really new to as3, and im just trying out some stuff, but i cant get a shape to refresh and change when i change its variable using a text field.If i change the text fields text before i test it, it works, but while its running it doesnt change it again.Btw, trying to change the stroke size.[code]i just want is so that when i change the strokeSize_txt text box, it will change the stroke for the shape.
I am trying to go about a "smarter" way of setting up multi paged full flash sites. This has got to be something very simple that i can't seem to put my finger on.
I'm trying to create a variable called 'currentScen' that i can declare off the start and change depending on what page the viewer goes to in the site.
I could put a bunch of 'if' statements saying that 'if the current page is this page then do this, if it's this page do this' etc. for each individual page but i thought there must be an easier way.
I am trying to get the following to work:
Code:
// declaring what the starting page is var currentScen:String = "welcomeMovie"; //function fading in called page with animation used on the 'over' frame label function animateOn(page:String) {
having an issue with a variable set. It is set as a string to default "no" on the very first frame of my movie, as follows:
var myaccess:String; myaccess="no";
Within my movie, there is an object. When this object is pressed, it is to change the _root.myaccess="yes"; I am tracing the variable within the movie clip and it shows me: I do not understand why it is changing my string definitition from "no" to false. Because of this, my variable does not seem to change to "yes' on object (button) pressed.
I have a movie clip on the main timeline that includes a button.When pressed, I want this button to conduct an if statement to check the contents of a textbox on the main timeline and if equal execute the statement.So far I have this but the text does not seem to 'read'. Do I need to pass the textbox contents into a string variable rather than read directly from what is in teh text?[code]
