I'm creating a drag and drop game for grades K-2 and two of my pieces stick to the mouse when clicked. I'm not sure what the problem is as I've used the same code for all of my pieces. The pants1_mc and the glasses_mc are the problems.
View 3 RepliesI have a List with an item renderer and would like to enable drag-and-drop onto the items in the list, rather than adding the data to the list. Is it possible to find the item that is being hovered over when dragging?
View 1 RepliesI am trying to create a quiz in Adobe Flash CS3 using Drag and Drop Feature. I have created similar Drag items and I want to drag the item and place it into any target. For Ex. I want Drag1, Drag2, Drag3, Drag4, Drag5 should go to any target from Target1, Target2, Target3, Target4, Target5. The objects on Drag1 through Drag5 is similar like I am working on number system. So I want the Drag boxes to go to any place values into the target boxes. But the drag and target instance names should be unique and should be mentioned in the component inspector also.
View 3 RepliesI need to ask about drag and drop item to the target and how to check the result if the target is true?
View 2 Repliesjust facing a difficulty with tree control drag drop..Suppose i have tree with drag-drop enabled.I want to which node(id) is droped inside which node. 1]if i drag "Cat1" node inside "Cat3",i want to identify ids of siblings of "cat1",and "cat3".2]in general i want to know the ids of current element being moved along withits new parent and new position and save these postions.3] Also "cat4" when moved outside "cat3",i want know its position and its siblings id.
<mx:XML id="treeDP">
<node label="Categories">
<node label="Cat1" id="1" isBranch="true"/>
[code].....
I have a DataGrid that contains data linked to a server. When I select mutliple items from the grid (using shift-select) and drag some items out from the DataGrid to another component, the array of items being dragged over appears to be in a completely arbitrary sort-order, and are not in the sort -order f the DataGrid as I'd expect.
Therefore, wwhen i drop them on the target (which is unsorted), their order doesnt match that of the DataGrid... what am I doing wrong and how can i fix this?
I'm getting the array using:
var dragItems:Array = event.dragSource.dataForFormat("items") as Array;
Is this the wrong data source on dragSource to look at?
I should mention that the drop target is a nonlist control, and that i am using a custom drop handler...
I have a drag & drop activity where 3 of the drags can go into 1 of 3 possible dropzones and be counted as correct. On clicking 'Submit', if only some are placed correctly, there's a 'Show me' option - this is the bit I can't do:if some of those with more than 1 possible answer are correct, I don't know how to check which dropzones are free to place the remainder in. My code for the first bit, checking the hitTest is ok:
for (var i:Number = 0; i<aLabels.length; i++) {
//3 drag items have 3 poss dropzones:
for (var t:Number = 0; t<aNewCorrectDZ[i].length; t++) {
//IF ITEM IS DROPPED ON ANY DROPZONE:
[code]....
I'm having a problem with my dragOver function.The point of my project is that can drag the items that are on the table to the little bag (this is a button) on the left bottom of the screen.The thing is that the dragging works but when I perform a hitTest the item is supposed to dissapear, but it doesn't....
View 3 RepliesI have a dynamic text box inside a movie clip which is controlled by a vertical cursor bar.If I use the up or down arrows, everything works fine.The middle cursor button works fine in scrolling text as well. However, once use to either end of the scroll bar, the mouse "sticks" to this and continues dragging!!I have looked at this AS for a long time and can't see the problem.
View 2 RepliesI have made a drop down menu with 7 items but as the invisible bottun around each item interferes with the item besid it, when i try to roll the mouse from one item to another, the invisible bottum dont work and the dropdown remains open.
View 1 RepliesI'm trying to make a simulation where a person can drag 2 different objects to any 4 predefined targets on the stage. Based on the position of the 2 objects there will be a different output text. I hope I described that clearly. I would also like the 2 objects to snap to the 4 targets. Im very new to AS. Im starting to be able to read it a bit but still can not wright it.
View 9 RepliesRelease to Drop NOT WORKING on drag and drop? Or is it something else?Can be seen here:
[URL]
Code:
var origX:Number;
var origY:Number;
for(var i:uint=1; i<6; i++){
this["choice_"+String(i)].buttonMode = true;
[code]....
i want to make flash drag a ball onpress and if its onrelease and if its on the Suquare movieclip it should stop draggin. my code is like this
[Code]...
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
Im having trouble with this and its going wrong. I need to use actionscript 2 and im on flash cs3.
View 3 RepliesIm trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
Wen i drag mc2 i want mc1 drag in the same time.
View 1 RepliesI have added drag and drop to some of my custom components.The drag event is fired on mouse down.If you mouse down and move the component around then drop it repeatedly its fine.But if you mousedown and drag the component around drop it and THEN just click on the component it inits the drag but doesn't fire the drop event.Its almost like you have to move the component for it to fire the drag drop event.This is very annoying as i'm removing the component on drag init and adding it again on drop, so just clicking on it makes it disappear.
View 1 RepliesI just read a comment at FlexExamples: One thing to note about the tree is that it is really just a list in which items are displayed. What that means is, you can't really drop somthing "into" folder unless the folder is open. Even in that case the user experience isn't quite right. So try moving everything out of one of the folders and then collapse that empty folder. If you drop something "on" the folder, it actually winds up between the target folder and the one below or above. This is indicated by the black line showing up as you move the mouse over the folders. If you "open" the folder (the only way to tell it is open is by the arrow) and then try it, you end up with an additional drop zone that is basically the bottom half of the opened, empty folder. This is also indicated by the black lines position.
It would be better if the middle section of any item could always be the drop zone for "add to this folder" and the top and bottom edges could be for dropping above or below respectively.I've just come to the same problem. Has somebody already managed this problem? In my case, I have dragMoveEnabled in the tree and offer the ability of dragging the tree items. But it is impossible to drag an item into another item that is empty. You can only drop the dragged item above or underneath an empty item.
I am trying to build a dropdown list of fonts with each item in the list being written in its font ("Arial" is in arial, "Comic Sans" is in Comic Sans, etc.). What is the best way to do this? Here is the latest code that I have attempted:
[Code].....
I've been trying to program a game in my class on Digital Media, and have run up to a huge roadblock concerning draggable items. I first managed to make one item that could be dragged with the mouse using this code (the movie clip is called 'honey')[code]...
View 1 RepliesI downloaded a free flash menu component. It's help file said "You can simply drag and drop the menu items wherever you wish".However, I don't know how to drag and drop it in my file. please help me, how to use it?
View 3 RepliesBecause of screen size, I must ensure we're only displaying necessary data to the user.I have a drop down box that contains only 5 items and I would like that when an item is selected, it doesn't appear in the drop down box (since technically it's showing twice, once at the top as the selected item and once in the list). how I would achieve this? I tried using a custom CellRender and overriding the "set selected" function to call this.visible = false if selected is true, but that simply hides the item but does not remove it from the layout of the drop down list.
View 1 RepliesWhat I want to create is a movie clip, that I can drag, but only on axis, such as up and down, but not left to right. For example, only on an X axis, but not on a Y axis.The code i'm currently using to make the items draggable is:
pc.onPress=function(){
startDrag("pc",true,50,50,550,350);
removeMovieClip("cnt");
[code]....
"pc" is the instance name of the movie clip I want to drag. "cnt" is a line that I've got drawn between the various draggable points I've created.
I am making a horizontal list that I want to be able to drag each item around to reorder the list. When one clip is dragged over another I want the one under it to move left or right to fill in the empty space left by the clip being dragged. I cannot seem to figure out how to tell which movieclip is touching or "under" the movieclip currently being dragged around. It seems that the hitTestObject method need explicity instance names to work. In summary, I want to know the instance name of any display object that the dragging moveclip touches.
View 1 RepliesI basically want to be able to drag any item out of that list, and when doing so, have it that item automatically go to the bottom, and have the remaining items scroll up. I can handle the drag and drop part of it, but I'm confused on how I could get the remaining column of items to dynamically move up depending on which item is taken out. I'm thinking maybe along the lines of an array? And I also suppose each item will have to be loaded in.
View 5 Replieshow to resize an item (a vector square or such) on drag? In other words, I want to click a side and drag that side having it resize. Sort of like WACK [URL]
View 1 RepliesI am developing a simple drag and drop game..except my draggable items are in a movie clip and my targets are also in a movie clip. My draggable objects work fine, they drag and snap back into place when the mouse is let go, but... they dont snap to their targets.They do snap to their targets when they are directly on the timeline, but inside another movie clip it doesnt work and i can't figure out why.[code]
View 1 RepliesBasically, there will be two images, which participants are to choose between. Below the pairs of images will be a horizontal bar with arrows at both opposite ends. I would like the participant to be able to drag and drop a small rectangle somewhere along the bar to represent their choice (and the degree of their endorsement).Basically, I'm asking how to make an interactive scrollbar on its side (without buttons, just the drag). I would also like it to start in the middle of the bar and be able to be moved in either direction.
View 2 Repliesusing 'drag and drop' in flash without overlapping?
For example - I have a list of buttons i drag to an area on the stage. I do not want my buttons to overlap.