So I choose progressive download and i put my swf in my flash file. And when i upload my swf and .flv. The flv doesn't show but it shows when I test the video.I know this is a common newbie problem, the swf probably can't find the video on the server, i did upload it. how can i fix this? Here is my code.Also on a side note, how do i make the video stop playing when you go to other pages on the site?All my buttons actions are on frame 1, these actions are on frame 20 where my video section is, i had this code.[code]
I decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code: var i:Number = 0; var myInt:Number; var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a swf that is pretty complicated, you can interact with the page and go to different keyframes and it stops and/or starts depending on buttons, but I want to put it in a fla or something so I can put other swfs next to it and build it up and put several of them together as one.
I don't care about making it too complicated, I just want one interactive swf to go to the next compiled swf when that movie ends, but when I try importing it or loading it it just runs straight through without stopping or paying any attention to the scripting.
I have a form made up of textfields nested within Movie Clips and when I hit tab, it doesn't go to the next textfield, but instead hops all around the interface. Is there any way to control this? I've tried using the accessibility panel and setting the Tab Index but that had no effect (I'm guessing because the textfields are nested in mc's).
I put a URL into my swf and tested it in Flash works fine it takes me to the webpage i want to be. I used the following script.
on( Release ) { getURL( "yoursite" );}
But when i put the movie onto my site via html it shows on my site but there is no link; it doesn't click to go to another site, nothing. This is my html code.
I am making a few animated flags for the corners of my website... so I made some pretty cool ones in Flash. but HTML doesnt like the swf files... So I had the ingenous idea to make them into gifs.... But now the mask I used to make the flags comes out on top and you cant see the 'flag' part anymore You can download it here [URL]
Ive been having troubles unloading some external SWFs. I know that in order to totally erase an SWF from the display list and memory I must to rip off all its references. But Ive got this SWF on stage, when the code is executed the SWF is gone for good, but in the second case when Ive got it loaded by pressing the load_intro_button the SWF doesnt go, even knowing that the function is exactly the same (Copy/Paste ) as the first one just under different names. Since Ive erased everything from the URLRequest, listeners, timers, and unload the swf, Why the GC doesn't take care of it as it did in the first case?.
Code:
//First Case var myIntro:Loader = new Loader(); var myIntroRequest:URLRequest = new URLRequest("intro.swf");
I am trying to more between frames using the data returned from a node n_EventID in an xml, when the node returns "1408" I want to move to frame 1 but if it returns anything else I want to move to frame 2. The part where the code moves to frame 2 seems to work perfectly but I can't seem to move to frame 1 when "1408" is returned.
xmlResultFinish = new XML(); xmlResultFinish.ignoreWhite = true xmlResultFinish.onLoad = loadXmlResultFinish;
I'm having a problem, where random IE's are not able to display my .swf file. All the IE's are IE8 with the latest flash pluggins and all security's are set at Medium, however some IE's get just a grey box and other's get the full flash file. What's going on? It works fine in Safari and Firefox of course, but why so much difficulty with AS3 Flash9 in IE? here is a link to the site, and it's the big image changer at the bottom of the front page.
I upgraded from an old version to CS5.5 and AS 3.0 and none of my AS works. I can't even do something simple, like display text in a dynamic box. What I'm trying to do:[code]This displays NOTHING. A trace shows the current frame, but I can't get it to display in the box.I also notice that the trace never shows frame 1. I have gotoAndPlay(1); on my last frame.
I was looking at this site:[URL]and i noticed that on a smaller screen with a lower resolution, the page simply moves in, instead of it staying at the normal size and having a scroll bar on the bottom. what extra code would i need to insert in order to do this?
I have a problem in that I've made a web banner - text with motion and shape tweens. Trouble is when I test movie, it not only plays in a different font to the one I've used in the design (metaPlus normal) it misses out text!?I'm not getting an exact replication of what the fla file is.[code]
I just installed Flash CS4 and brought ip a couple of fla's I get a box telling me I don't have some fonts on my system that I know I do have like Verdana and Ariel, etc. Is there something I should configure?
But my proublem is that I have a flash presentation.The defalt for moving the slide screens back and forth are left and right arrows.It works fine when tested or even the .swf fileBut then the left and right buttons don't respond when I go to fullscreen.
I am playing an swf on a VB.net form which works fine but I've added an FLV to another layer in the same swf and when I run it, the FLV doesn't appear. If I run the swf by itself the FLV appears. I've tried using the FLVPlayback component and tried coding the FLV with AS3, both work when I run the SWF by itself but the FLV still doesn't appear when run in VB.
I want to call a html page through flash passing a variable, and receive this variable by javascript in the html. I created the following code: Flash:getURL ("service.html?option=1","_self","GET"); Html:<script>var option = location.href.split("=") if (option[1]=="1"){...}</script> The html is correct (I think...), however the variable does not appear on the URL. The URL is shown as "service.html".
I made a Flash 8 movie (Swf) that is 212kb in size. I could reduce the size of my .Swf by compressing its pictures. I did so, reducing the pictures inside it from 518kb to 183kb with Irfanview but when I import them into my movie/library and save it there is NO difference in size - it stays on 212kb.
I've created an app in Flash Professional CS5.5 and when I install it on iTunes, I see the icon in the list, and when I sync the iPad, it even comes up on the iPad 'pages' in iTunes, however doesn't show up in the actual iPad.
My Flex application has some memory problems which I'd like to find using the profiler. However, when I run the profiler from Flex Builder, nothing happens. The appication is run the regular way, but nothing is profiled. The Profiling perspective doesn't event open, and when I open the Profiling perspective, no memory usage is displayed. Can anyone help me out here?
I want to read an Atom in Flex.I can see in the debugger that he can read the Atom and that there are entries, I can see each value. So far, so good.But when I want to assign a value from the atom to a variable, he never gives any text. It's always this: "".
But that's strange, because I can see in the debugger that it schould be "Tweakers.net".It becomes even more strange, because it works just fine with RSS.
I have three frames. The first frame is the original. When the marker hits the right answer (target i should say), it must proceed to frame 3. If the answer is wrong it should go to frame 2. But the things when the marker hits the right answer the frame that is being shown is frame 2 and not frame 3.
I don't have a clue on what I'm doing wrong. Sometimes, when I open this page my html page , the swf don't appear. It won't happen always, but is really frequent.Important: when it don't appear, I do can hear the sounds that the swf movie makes. In other words, I'm shure that the object is on the page, but it just won't be visualizable.The error occurs on Firefox and Chrome (I didn't see it happening with IE, but I won't doubt that it is possible)The problem isn't in the swf because I have already tested with another file that have no code at all and the same problem occurs.Here is the page's code, generated by Flash CS5.5 when publishing the swf:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
Here is what I am currently using to link to my asp page so as to not log my visitors out wen clicking on a Jpeg image.[code]Here is the getURL actionscript I am currently using in my new swf but it logs visitors out.URL...How can I get to the page I want without fear of logging visitors out?
Is it common for AS3 apps to not work in IE? Is there a way to make them work? I have a movie clip in my library linked to a custom class Main and I have nothing on stage. Just one frame. Everything is built inside that movie clip. I add that movie clip to stage through a document class and everything works perfectly in Firefox and Chrome but when I open it in IE, it's just a blank page.
I made a Flash 8 movie (Swf) that is 212kb in size.
I could reduce the size of my .Swf by compressing its pictures.
I did so, reducing the pictures inside it from 518kb to 183kb with Irfanview but when I import them into my movie/library and save it there is NO difference in size - it stays on 212kb.
