ActionScript 3.0 :: [FP10] : Sound.extract And Saving Mp3 File?
Jan 29, 2009how to convert bytearray of samples from Sound.extract to bytearray of mp3 file? I want to save editied mp3 to user's local disk.
View 0 Replies
Similar Posts:
ActionScript 3.0 :: WAV File - New Sound.extract() Function To Get Two Seconds Of A Sound Into A ByteArray
Nov 11, 2009I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
ActionScript 3.0 :: Sound.extract() To WAV File?
Oct 15, 2010converting a Sound object into a WAV file (bytearray). The main issue is I need its samples to be 16-bit per channel, and Sound.extract() returns 32-bit floats (per channel).After that I was going to add the wav headers and write the bytearray to disc. I'm widely surprised for not having found an example of it working on the web
View 9 Replies.net :: Programmatically Extract The Sound Portion Of A Flash SWF File?
Mar 12, 2010Do any libraries exist with this functionality?
View 2 RepliesActionscript 3 :: Sound.extract Method Empties Sound Object Data
May 20, 2011I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
Flash :: Playing Sound From Data Acquired From Sound.extract()?
Aug 1, 2011I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
Media Server :: Microphone Sound Recording,saving / Playing Flv File Is Saved But Not Working
May 4, 2009While recording the flv is saved inside applications/stream/samples/audio.flv. But it is not working properly.[code]
View 1 RepliesFlash :: Extract Sound From A Fla?
Jan 30, 2010There is an .fla file that has a sound wave in it's library. However I do not have this sound wave saved on my computer so I can not edit or open this sound in another application. I was wanting to know if its possible to extract this *.wav file from out of the fla library? I did some research and they said to goto export movie and export it as an *.wav file. However I tried this it exported the whole fla file as one big *.wav dud. I tried to play it and nothing happened which makes sense.
View 4 RepliesActionScript 3.0 :: Sound.extract In Flex Builder?
Dec 26, 2009I'm using Flex builder to work on my flash project, and after reading this article about manipulating sounds using Sound.extract() I got very excited.So I wanted to get using it, but as far as Flex builder is concerned, the sound class doesn't seem to have an extract function, and causes an error if I try.I've downloaded the latest milestone SDK (3.5) and updated the eclipse system (I'm on a mac), but it still doesn't want to recognise the existence of Sound.extract(), even though the function appears withi
View 1 RepliesActionScript 3.0 :: Sound Extract - ByteArray To Decibel?
Jun 29, 2010When I extract the bytearray of a sound file I get the raw audio data. Is it possible from that raw audio data to get the decibels?
View 3 RepliesActionScript 3.0 :: Load Mp4 With Flvplayback Extract Sound?
Jun 7, 2011i would like a method to do this.I have a video mp4 play with flvplayback with soundi would like to play sychro mp3 music file with videoBut video have an audio and i would like to keep my audio too.Then how can mix the audio of my mp4 with audio of my mp3?
View 6 RepliesFlash - Flex Sound Extract And Save Mp3?
Aug 15, 2011I'm trying to rig up a basic mp3 cutter in Flash (using the Flex framework)I have gotten so far:
var ba:ByteArray=new ByteArray();
sound.extract(ba, playEnd - playStart, playStart);
This extracts the relevant bytes from the sound object and stores them in ba Then, I do this:
saveFile=new FileReference();
saveFile.save(ba, sound.id3.artist + " - " + sound.id3.songName + ".mp3");
The file saves properly, but it can not be played (Players say it is corrupted) how I can create a valid mp3 file from the byteArray obtained after the extraction?
ActionScript 3.0 :: Sound.extract() On Streaming Audio?
Sep 8, 2010I'm picking up Flash and AS3 after working with AS1 a few years back. My first project is a mp3 player that is able to take an mp3 file, a start loop point, and an end loop point to loop the mp3 without any gaps or breaks in the sound.
blog.andre-michelle.com/2010/playback-mp3-loop-gapless
I found this page that got me started, and went off of that code. The resulting player works perfectly except for one fatal flaw. As far as I know, the mp3 file must be fully loaded to be able to use the Sound.extract method on it, this can take a while when the files are 3-4 MB, especially on slow connections. I want to be able to have the audio start playing as soon as the mp3 file begins loading.Is there any way to use the Sound.extract method on a streaming audio file that has not fully loaded yet?
Actionscript 3.0 :: Music Visualization With Sound.extract()?
Mar 19, 2009I'm trying to match the behavior of SoundMixer.computeSpectrum() by using the new Sound.extract() method, so that I can draw music visualizations for separate Sound objects at once. As you know, computeSpectrum() samples the currently playing audio and copies it to a ByteArray. Sound.extract(), on the other hand, copies as much of the Sound as you want to the ByteArray, and does not require the Sound to be playing at the time.
With the Sound data extracted to a ByteArray, I know have about twenty-six thousand floating-point values representing the waveform, from start to finish. However, I'm only interested in about thirty-two of them at a time- the last thirty-two that were played. How do I determine where in the ByteArray that would be?
Actionscript 3.0 :: Music Visualization With Sound.extract()
Jun 30, 2009I'm trying to match the behavior of SoundMixer.computeSpectrum() by using the new Sound.extract() method, so that I can draw music visualizations for separate Sound objects at once. As you know, computeSpectrum() samples the currently playing audio and copies it to a ByteArray. Sound.extract(), on the other hand, copies as much of the Sound as you want to the ByteArray, and does not require the Sound to be playing at the time.
With the Sound data extracted to a ByteArray, I know have about twenty-six thousand floating-point values representing the waveform, from start to finish. However, I'm only interested in about thirty-two of them at a time the last thirty-two that were played. How do I determine where in the ByteArray that would be?
Flash :: Sound Extract To Bytearray - Progress Handler?
Mar 17, 2011I'm using the following to extract the sound data from a sound object and store this in a byte array.
I require that the entire mp3 be loaded into the bytearray before advancing and the below works fine for this purpose however flash temporarily hangs while it extracts this data (2.4mb mp3)
Is there a way i can stop it from hanging i.e. use an eventlistener to check the progress of the extract process?
[Code]...
AS3 :: Flash - Sound.extract() - Create A Visual Waveform For An MP3
May 29, 2011I'm trying to create a visual waveform for an MP3. The code I've included is called on successful load of the MP3. I intend to extract just a few important samples from the sound to create the waveform, rather than extract the entire sound into a bytearray. Even on a good machine, extracting an entire song can cause flash to freeze up for 3-5 seconds (or longer!). For my purposes, this isn't feasible.
Unfortunately, the code I've got below is failing to produce any numbers. If I extract the entire song it functions, but extraction of just the key points is giving me nothing. Does performing an extract make the remainder of the sound object invalid for future extracts? If so, is there some way around this that won't freeze flash for an extended period of time during the extract? Some important variables from the rest of the code:
[Code]...
Flash :: AS3 Using Sound.extract In A Loop To Analyse A Soundfile?
Aug 27, 2011From this AS3 code I expect 500 lines of trace outputs that contain "2048". But instead I get only some lines containing "2048". The rest of the traces print a "0" which shows me that the extract() method did not return any data.
Why is this the case? I would like to iterate through the soundfile with a specific amount of steps to extract 2048 bytes of the sound at the respective position. Extracting the entire soundfile at once would freeze the flashplayer for seconds and is therefore not a good solution for me.This behaviour can be found as long steps is smaller than samplesInSound/2048.The closer it comes to that value, the more lines with a "0" are printed compared to those with a 2048 in it.
var sound:Sound = new Sound();
sound.load(new URLRequest("soundfile.mp3"));
sound.addEventListener(Event.COMPLETE, soundLoaded);[code].....
I had the idea that the extracted part of the soundfile is cut out of the rest of the soundfile after extracting it (like at Actionscript 3 - Sound.extract method empties sound object data), so I tried out another for loop:
for(var i=0; i<samplesInSound - steps * 2048; i += Math.floor(samplesInSound/steps) - 2048) but this didn't work out either.
ActionScript 3.0 :: Extract Sound From A Video For Pitch Shifting?
Jan 4, 2011any thoughts on how to extract the audio from a movie? Pitch shifting is do-able to this article:But the code uses the Sound class.I've NO idea how to go about extracting the audio from a movie/FLVPlayback
View 5 RepliesActionScript 3.0 :: Sound.extract() Method Undefined When Test The Movie
Mar 24, 2010I have installed Flash CS4 upgrade successfully with Flash CS3 full. I have also installed Flash CS3 full and then CS4 upgrade, but it made no difference. I cannot test an example that uses sound.extract() method. When I test the movie, I get an error message stating "Call to a possibly undefined method extract through a reference with static type flash.media.Sound".
View 4 RepliesActionscript 3 :: Alchemy ByteArray Float Conversion From Sound Extract?
Apr 6, 2011I'm trying to do something simple: send a byteArray to a C library, fill up a buffer and read the memory, but I think I have float conversion problems.
Here is what I do in AS:
var memory:ByteArray = gstate.ds;
// get sound
var soundBytes:ByteArray = new ByteArray();
_source.extract(soundBytes, 4096);
[Code]...
Audio :: Extract Sound Object To A Mono Byte Array In AS3?
Jan 18, 2012I'm trying to prepend the byte array of a sound object to a captured microphone sound byte array.
It works, but the extracted sound object get pichted down and doubled in length. I guess this is because the byte array of the sound object is in stereo, while the mic byte array is in mono.
I have this:
sound.extract(myByteArray, extract);
myByteArray now contains the stereo data. How can I turn this to mono
UPDATE:
Here's a working solution:
existingByte.position = 0;
var mono : ByteArray = new ByteArray();
while(existingByte.bytesAvailable) {
[Coe]....
Flex :: Extract A Zip File From A Zip Archive Without Loading The Whole File Into Memory
Mar 10, 2011Is there a way to extract a single file from a zip file in Adobe AIR?
I'm using NoChumps zip library to extract files from a zip. In this library the entire IDataStream is loaded into memory and after that you can extract file entries easily. In cases where the zip is 5 to 10MB there are no problems. But when the zip is 80MB, which many are, 80MB is loaded into memory. This causes the app to crash and run slow on mobile devices. According to the zip specification,
"A ZIP file is identified by the presence of a central directory located at the end of the file, this allows appending of new files. The directory stores a list of the names of the entries (files or directories) stored in the ZIP file, along with other metadata about the entry, and an offset into the ZIP file, pointing to the actual entry data."
Also, I do not have control of the size of zip files but most average is 60 to 100MB. Files inside are ~4MB.
Actionscript 3 - Recording And Saving Sound From Flash?
Mar 3, 2010How can I record and save sound in flash AS3. I have writing access to the server and also access to PHP files.
View 1 RepliesActionscript 3 :: Flash Player 10 Dynamic Sound Saving Options?
May 5, 2011I am able to generate dynamic sounds using flash player 10.Is there any way to save the data to a .wav file on the server?
View 1 RepliesActionScript 3.0 :: Play A Sound File And Show The Progress Of The Sound File Being Played
Mar 16, 2009I have to play a sound file and show the progress of the sound file being played. I am using import flash.media.Sound; import flash.media.SoundChannel; But the PROGRESS event gives theprogress of loading of file. I want to know of much of the song has been played and how much more is left.
View 3 RepliesFlash :: Extract URL From .swf File?
Feb 12, 2011I am trying to extract images from flash on the following web-site: [URL]
I noticed that every time I click on "Next image", an images is requested from sever. Sample URL is [URL]
So, this URL is exactly what I need, but I don't know how to extract all these URLs from the .swf file I have. I don't have any experience with flash, but I think that URLs should be in the .swf file. I tried "grep '110206os_o_003_T1C1_2pw26' adspage_slider-2.swf", but didn't get any result :(((
Extract Images From SWF File?
Mar 25, 2011Is it possible to programmatically extract image files from a SWF file using C#? If so, how would I go about doing that? I know this question doesn't have a lot of detail but I'm just getting started on this and know very little about Flash.
View 2 RepliesFlash :: Extract A Video From An SWF File?
Dec 18, 2010I want to extract a video from an swf file and make from it a video to load to youtube(I lost the origianl videos).
The swf was created with flash 5-8(not sure which. how can I check if it is importent?).
When I looked at the source(I don't have the fla) with Sothink SWF Quicker I could export the sound but not the video.
What I did see was that the video was without sound(wierd but true).
Actionscript :: Extract The Bitmap From A .ico File?
Aug 13, 2011using actionscript 3, how can I extract the bitmap from a .ico file? ( preferably in .png format )
View 1 Replies