I am trying to get my swfobject to register 100% height. I am writing this: Code: swfobject.embedSWF("CoolBox.swf","content","100%","100%","9.0.0",null,null,null);
and it doesn't work. If I replace the height paramater with a static number like 200, it will work. The width paramater works fine at 100%.
I have two example pages. http:[url]....this displays 100% width and height flash without a problem across all the browsers including IE9.http:[url]....this displays 100% width and height with min-height and min-width without a problem across all the browsers except for the IE9.I need #2 link work with IE9. (fullsized flash with min-height and min-width).
View 1 RepliesswfObject embed has the following signature,swfobject.embedSWF(swfUrlStr, replaceElemIdStr, widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj, parObj, attObj, callbackFn)with width and heigth required attributes,What can I do to signify dynamic height and width.
View 4 RepliesI have a full screen flash movie that loads and displays correctly in firefox and chrome. In IE, however, it displays at 1/3 the width. The embedded code is relatively simple:
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
[Code]....
IE respects the height, but I would really like to use 100% height. What could I be doing wrong?
Tested in IE 8, Windows XP, Flash Player 11, SWFObject v2.0
I am developing an animated homepage for a Flash-HTML hybrid website, and for the sake of standards, my solution is proving difficult.
Here is the run-down:
For Flash users, HTML page loads a variable-height AS3 Flash movie that will start at 556 pixels high, and after finishing its animation sequence, tween via Actionscript + JavaScript to 250 pixels high.
To kick off this movie sequence -- (below-left) -- I am attempting to set the initial height of the Flash movie via MooTools, so if users do not have Flash or Javascript enabled, they will see the shorter-height image area with alternative image content and HTML content revealed (below-right).
Element.setStyle sets the height just fine until swfObject runs, at which point the movie collapses since I am not specifying a height via CSS. If users do not have Flash, it defaults to the height of a static image.
So here is my question: Does anyone know how to dynamically pass a height variable to swfobject when it is set up to width/height @ 100%? Am I killing myself for no reason trying to work with two page heights?
Image Sequence: Left - Initial Flash movie with HTML navigation below Right - Resized movie at the end of the sequence with HTML nav & content below, looks the same as no-Flash version (static image)
[Code].....
With swfobject 2.2, how do you specify the desired version of flash you require? I need flash 10, but swfobject won't perform an upgrade install with the provided expressInstall. swf in the swfobject 2.2 distributable. How do I get an upgrade install to occur for flash 10?
View 1 RepliesI store a UV-coord from va1 to v1. In the frag shader, an interpolated texture coordinate now is available in v1 to sample. Are there connections under the hood, like semantics, to associate v1 with being the normal coordinates?Are fragments pushed to the fragment shader per triangle or once an entire mesh's geometry vertices are run through?In the vertex shader, let's say I multiply my modelview by my vertex's position. I then want to share my z-coord with the fragment shader for something else. I store the z-cord of the transformed vector into v3. Once I am in the fragment shader and I access v3 for the z-coord, is this the same z-coord I passed in or is this z-coordinate going to be altered by the perspective divide in between? I only ask as I want to clarify the "interpolating" behavior described when storing values in these registers.
View 1 Repliesi had to klick the ball... that kinda teaches me something new instead of teaching me, whats wrong ok i really dont get what i messed up with my editing of the second post, which was just a copy of my first one (i dont get why).
View 2 RepliesThe following code (with a textField on the stage named "textTest") will trace and display on the stage the Key Code of the key pressed. When done within the IDE, and any other browser, it works fine. However, when tested in Firefox 4 (for Mac), everything works except the arrow keys.
package {
import flash.display.MovieClip;
import flash.events.KeyboardEvent;
public class test extends MovieClip {
[code]...
I have a bit of graphical content inside a symbol that I've created in Flash CS5. Let's call it FunGraphics_Art, it's set to export, and it extends MovieClip.When I edit the symbol in Flash and I hit control-A, the properties panel tells me that all of the content has a height of 72 pixels, positioned at 0,0.The content consists of a few (classic) textfields, and a couple of Checkbox components and a few bits of vector art.All the content is on a single frame, no layers.So far, so good. I export my art as a .svc and am able to use it all in code just fine. However I then add the following bit of code to my .as file..[code]Somehow, there's something strange going on that's causing Flash to think my exported symbol is about 75 pixels higher than it actually is. I've looked around for invisible "blank" textfields, but haven't found anything yet.
View 2 RepliesI've created a dynamic text field, and set autoSize to true, so it can grow was tall as necessary. I then want to use the _height value to size a container graphic (speech bubble). Here's the (simplified) code:
[Code]....
Returns 19.6 followed immediately by 35.2. It's as though reading txt._height causes it to recalculate, so it's correct the second time. I also tried the textHeight property, which also seems to get recalculated after _height is accessed. This sequence, for example:
[Code]....
I've made a popup div that shows a video if you press a button. If you press Esc, the div is hidden again and the video is removed. (Using JWPlayer in Flash.)
If you click on the JWPlayer video, Flash gets the focus and JavaScript can't listen for keypresses on the document anymore. Is it possible to make JavaScript get the focus after you've interacted with the JWPlayer video player, so that you can still press the Esc button after for example pausing the video?
I am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
I press the key down but it doesn't do anything.
ActionScript Code:
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, moveLauren);
[Code].....
I am experiencing some difficulty in having the flash content show on this page. I have checked the code and the paths and everything appears to be correct. I have another page in the same directory as the swf file and it works fine so I know that swfobject and the swf file are working properly. Any ideas why the swf file is not showing properly in the first page?
View 1 RepliesI'm following the steps here: [URL]..I'm embedding it this way:
[Code]...
It turns out that the flash content is not visibie at all,why?
I've embedded the following into the page, but if flash isn't installed nothing happens I thought that it would prompt you to install
<script type="text/javascript">
$(document).ready(function () {
var flashvars = {
[code].....
I am trying to register a javascript-function from Flash, using the navigateToURL function like this:
navigateToURL(new URLRequest('javascript:function init(){ ...doSomething()... }', '_self' ));
to have the function init() available via ExternalInterface --> ExternalInterface.call("init", This works fine in Firefox, but Internet Explorer fails to register the function.
I'm trying to update the famous Floating text in space from levitated.net (URL...)The script was originally AS1, & I'm updating it to AS3.
View 1 RepliesCurrently I am working on flex using puremvc framework. Actually my question is related to where to register mediator in puremvc framework. One of my colleague is registering mediator in views(components) creationComplete method only (inside view). While my preference is send some notification from creationComplete method which could be handle by some command and command will register mediator. So which one is better approach in terms of best practice ?
View 3 Replieswhen i make a MovieClip by code
ActionScript Code:
var my_mov:MovieClip = new MovieClip()
where is register point on the movieclip?
[code].....
How come these Array values won't register? Here's a code snippet from what I'm working on, I put line numbers so it's easy to refer to them. (I started with three because I erased lines of code and I didn't want to change everything)
Lines 3 to 6 are in an if clicked (is true when mouse event listener is activated) statement in the gameLoop (Event.ENTER_FRAME loop).[code]...
Does anyone know how to make a login and register in flash using actionscript 2.0 and or 1.0?
View 1 RepliesIve been trying to include an swf with buttons, that plays .flv videos, into this html page: [URL] (feel free to view source) Im having trouble because i think the swf 'links' to flv files, and neither are in the same directory as the html page - the swf is just not showing up. i dont want to duplicate the swf and its corresponding flash files if theyre already hosted once by this client - does anyone have a solution, or is the problem actually something else? the swf files can be downloaded at: [URL]
View 1 RepliesI am using swfobject to display some Flash content (please don't tell Steve Jobs) and I need to set the background color of the swfobject content to black so it blends nicely with the black page it is on.I tried using the following code but it didn't change anything:
<object id="flash" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="900" height="600" bgcolor="#000">
What is the correct way to set the background color to #000000?
i'v edited this page over ftp from a normal pc (without developer tools), wich i can't install here.Can anybody see me why the swfobject isn't loading?
View 1 Repliesswfobject.embedSWF("flash/main.swf", "myContent", "100%", "100%"...
It turns out the above doesn't work,how can I instruct to swfobject that I want the swf to be as wide/high as possible?
Developing an ASP MVC site which has a Flash Intro and encountered a strange behavior: it is impossible to go into full screen (in any browser). Flex application has this script to go in full screen (AS3):
[Code]....
I tried SwfObject for loading swf on a website. It is all good with webkit and mozila based browsers but not with IE.[URL].. In IE 8 the footer not loading, it like crashes after the swf loads. In IE 7 the player not working, so the footer loads.
How can I debug it? I have a Mac, Linux, Win7 with IE 8 64 bit. On IE 64-bit it gives a message to update the flash player but there is no update for this player from Adobe.
I have downloaded SWFObject, and included it in my website. Now I want to simply get a true or false value based on whether or not Flash is installed in the users browser when they visit my site.
View 1 Replies