ActionScript 3.0 :: Gedtting Number Variables To Show In Field
Jun 1, 2010
I'm starting my progression from AS2 to AS3 and am running into a glitch that has me tugging at my hair.I'm basically trying to create a button that will generate a random number and place it into a text field. However, when I try to run the script as shown, It hits me with a 1067 Implicit Coercion error message.However, if I run the currently commented out String variable test it works fine but when I try to to run the Number variable code it errors out on me.The random number generation code is working (based on the trace) but for some reason won't show up in the text field (named myText).[code]
View 2 Replies
Similar Posts:
Apr 9, 2011
i am trying to do a loop to create several variables to aasign each one of those variables one number.when i write
[Code]...
View 4 Replies
Jun 7, 2010
i have something like this in the frame:
var number1 = 10
var number2 = 10
And in the stage i have 3 dynamic text boxes. The 1 one has the variable number1 the secound one has the variable number2. But how do i do so in the third box it says 20? I want it to substract number1 and number 2 and show that in the box.
View 1 Replies
Nov 29, 2010
i make simple random tester. it show how often a certain number hits.
View 0 Replies
Apr 21, 2008
when I started my movieclip was simple...its an info popup that comes up when someone clicks another movieclip on the stage...anyhow, when it comes up it looks like a projector screen that is being pulled down...there is also a number in the top right that is supposed to be scrolling...there are two problems with my popup...
1) the scrolling number does not show up...
2) the content in the info popup refuses to stay invisible until the "screen" is pulled all they way down...
the first link shows what the scrolling number is supposed to look like...I did not change anything regarding the scrolling number when I altered the content to fit and look decent in the info popup..
View 1 Replies
Jan 12, 2010
i need to show 3 sentences consecutively. sentence1 first followed by sentence2 and lastly sentence3. i used these codes:
Code:
var txt1:TextField = new TextField();
txt1.text = "Flash"
[code].....
View 10 Replies
Oct 9, 2006
I have 1 form text field,dynamic called txt2, I have the combo box called cb_instance that i'm trying to get the value selected from the combobox to show in the text field.I can get the value from the event object using trace but can't seem to see how to get it to show in the text field called txt2.d.
var cbox:Object = new Object();
cbox.change = function (cb_evenObj:Object) {
txt2.text = cb_evenObj.target.selectedItem.label;[code].....
View 2 Replies
Apr 23, 2012
I would like to make a dynamic field where the number to make a count of 0 to a number that will come from a variable.I am researching several hours and can not find.An example is the preloader, we have the percentage below the bar that has that type of field, plus the preloader I have is based on getBytesTotal (), and getBytesLoaded ();But in my case I'll just have a variable with the final value, and I want to show that the field from 0 to this value.
View 3 Replies
Sep 12, 2004
how I can format numbers in Flash so that it will show two decimal places regardless of the number itself?
View 4 Replies
Feb 26, 2002
I have animated button inside movie clip. On rollover, button zooms in and rotates. It even swaps depths (that took me a while). However, if I have 10 buttons on the screen, one of them, and only one, will not rotate, and will not zoom, but everything else works. The kicker? The button is never the same. To see what I mean... I have the site staged on this [URL] clicking on the number will show a picture
very little code here (as you can imagine)
on rollOver {
_root.stopandgoto(frame#);
x=0
x=x+2
_root.instance.swapdepths(x)
}
View 13 Replies
Nov 23, 2011
I am working on an application that allows user to copy and paste content into a text field. The problem I'm running across is that when the user paste something with a tab in it, the tab is not shown in the text field.[code]...
View 1 Replies
Aug 29, 2011
I'm using an editable datagrid where the user is typing in their data. When they click outside the datagrid it doesn't show the last value they entered. The value is there and if you click on that field again it will show up. If you click outside the field for a second time, this time the value stays displayed. How can I get the value to show up the first time the datagrid looses focus?[code]
View 2 Replies
Dec 11, 2009
how do you display a variable in a dynamic text field?
View 2 Replies
Mar 16, 2012
I have drop down list if i select the Bank draft or money order it should show the description in one of the lable. it is showing now. But i want to display the description if one of the other box value is greater than 1500, actaully there are two field one field has value for Security deposit amount and second is drop down security deposit type in this if the value is > 1500 the description should show.
Field One (Input box)
Deposit amount (entering values in the box)
Field two (dropdown)
Deposit Type (Bank Draft/ Money order/Personal check)
If the value is in the deposit amount >1500 then it show the description under one lable "Please Send your postal address proof)i have that funciton
ActionScript Code:
IncludeInfoItems = function (bool) {
if (!bool) {
[code]....
View 0 Replies
Apr 14, 2011
having a prob with my code. I'm trying to show a hidden dynamic text field with at button, but no luck I can make it work, if the field is'nt hidden, but not the idea. It should first show when you hit the button, if you know what I mean I'm working in Flash CS5Layerscript:_root.eventtext._visible = false (hide my textfield)
Buttonscript:
on (release) {
if(!eventsVisible){
[code].....
View 4 Replies
May 13, 2011
I have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 Replies
Dec 13, 2010
I'm trying to figure out Flash CS5 on my own, and this should be easy, but... All I want to do is validate that the text entered in a text field is a number when a button is clicked. It can be a positive, negative, or decimal, but no letters or symbols.
View 3 Replies
Jun 2, 2010
i have a dynamic text field on the stage with the instance name of "inputBox". On the same frame i have the following code...
ActionScript Code:
var firstNumber:Number = 3;
var secondNumber:Number = 5;
[code]....
the above code works perfectly and it does trace back the result. However I'm confused on how i can put the result in the dynamic text field i have on stage. Can i use the instance name to do this...
View 2 Replies
Nov 22, 2010
I have tried and tried but i cannot get a number to force show 2 decimal places.I have lots of different buttons and selection boxes that output a different value for 'sizePrice' and 'effectPrize'. An example can be seen below:
Code:
if (sizeSelectionBox.value=="size1") {
sizePrice=67.20;
calcTotalPrice();
[code]...
I need totalCost to always show 2 decimal places so if it is 60 it needs to say 60.00, if it is 67.2 it needs to say 67.20
View 4 Replies
Nov 22, 2010
I have tried and tried but i cannot get a number to force show 2 decimal places.
I have lots of different buttons and selection boxes that output a different value for 'sizePrice' and 'effectPrize'. An example can be seen below:
Code:
if (sizeSelectionBox.value=="size1") {
sizePrice=67.20;
calcTotalPrice();
[Code]....
I need totalCost to always show 2 decimal places so if it is 60 it needs to say 60.00, if it is 67.2 it needs to say 67.20
I thought the *100/100 should do it but its no
View 2 Replies
Apr 22, 2005
Im trying to make a script that show numbers counting to a certain number. Need some help. I want to start at 0 and then counting up to for example 52.
View 3 Replies
May 9, 2006
I have inserted a TextArea component and i can add text normally by changing it in the parameters tab. but i was wondering if anyone knew the code so i can make it show and input text field ? (call a .txt file in to the TextArea component)
View 1 Replies
Feb 24, 2008
I have an input text field that the user is going to type their name into in a form and then press 'next'.
After they press 'next' I want their name to show up in the next form (which all will be contained in one movie clip on the same html page)
View 9 Replies
Dec 25, 2009
I want to show special characters in flash
I have taken a dynamic text field with HTML property = true;
Some of the characters are working fine. But some of the special characters are not. For example the angle symbol "∠" is not working.
I found out the Decimal code for angle symbol (∠) and used it. It is working fine if I don't embed the font but when we embed the font (even with all the characters that flash support), it is not working.
I am using the following code
Code:
abc_txt.htmlText="∠abc"
View 1 Replies
May 6, 2009
I am creating a dynamic text field and "next" button. When the movie is played, the number "1" will be displayed on dynamic text field. When the "next" button is pressed, the dynamic text field will display 2 and so on...
It is like 1...2...3...4...5...
View 1 Replies
Oct 11, 2010
I'm writing a scrolling shooter game and have a dynamic text field that holds the game score. Running inside an ENTER_FRAME event listener, it updates every frame. By tracing the variable "score" I get the correct numbers showing up in the output tab, but on screen, I only see the number 2. It doesn't matter what position in the number it is (ie: 20, or 10372, or 521), only that digit will show up. If there is no number 2 in the score, the field only shows the word "Score: "
The variable is declared as such:
var score:int = 0;
The text field is called scoreCard and is set to "Classic Text" and Dynamic Text" and it is 638 pixles wide (almost the entire width of the stage).
Here is the code for updating the scoreCard:
scoreCard.text = 'Score: ' + score;
trace(score);
The trace was simply put in to see if the score was being tallied up correctly, which it is.
I have also tried eliminating 'Score: ' and simply used:
scoreCard.text = score.toString();
and gotten the same results.
View 2 Replies
Jan 16, 2011
I have the need to populate three text fields with a random number in each.How do i wire up each field to retrieve the results of the random number function I've written in Actionscript?
View 7 Replies
May 30, 2011
I'm working with an input text field that has to contain a max number of characters (90... I set this on the properties panel) and a max number of lines: 6 but i don't know how to set this property.... I've searched, and all I could find was the numLines property, but it doesn't allow to specify the number of lines iI need my text to have...
View 3 Replies
Jan 14, 2010
On my stage I have a dynamic text field (instance name = lives).
In my actionscript I have created a number variable called livesnum. And then beneath that I'm setting the textfields value to be the livesnum variable but I get the following error:
1067: Implicit coercion of a value of type Number to an unrelated type String.
My actionscript is as follows :
var livesnum:Number = 4; //Amount of lives
lives.text = livesnum;
How would I achieve setting the textfield as the numeric value of the variable?
View 1 Replies
Mar 30, 2011
I want to get the line number of the text-field where cursor is focused currently.
View 1 Replies
