I am trying to get my flv file to start playing when the page is loaded with no sound, but I am have no luck. The flv file starts playing fine with the sound on, and I can turn the sound off with my volume controller, but I need it to start playing with no sound.[code]...
View 3 RepliesSo I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
I have recently updated to Flash CS4 and AS3 from Flash 8 - apart from one issue I have with the Sound Object. There seems to be a delay in the loaded MP3 playing when told to. This means that I am unable to add SFX to the game I am developing for a client, because the sound plays about 1-2 seconds after it is told to play. How to tee the Sound up, so that it plays immediately?
The process I am using is this:
Class defined to load all game assets defined in XML
All Sounds are loaded into their own Sound Object and a reference to each is held in an array and passed to the relevant Class (i.e. Player). The relevant Class tells the reference to the Sound to play - it plays, but 2 seconds after the collision detection Event has told the sound to play.
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
I have a problem that I have not found a syntax error or logic error to explain. It appears to be an obscure problem related to playing a sound file and graphic positioning in the same file. My next step is to look for any known bugs. I have posted the file at. URL] When the page loads you will see a list of selections. Do not click any of the html Play buttons In the graphic arrow pointing to the right is the play button click it and a default file will start. Click the pause button (which will be green while the selection plays) Then click the play button again. The knob that moves while the song plays, will begin moving from the position it was at the time pause was clicked.
Click the stop button (arrow facing left with vertical line at tip) Choose a selection from the html list by clicking the Play button next to it. Then click the play button in the player display. The title of selection will appear in the title area. repeat the original steps (play, pause, play) This time the knob that moves while song plays, snaps back to the start and moves from start, rather than from the pausedposition.
[Code]...
can I de-crpypt a streaming file, (assuming that i encrpyting this file on the server side during upload) , in flex before it being processed for playing.
View 1 RepliesI've got a game I made just to play with AS3. But I'm having an issue with the sound. Playing the swf file will play the sound, but when embedded I hear nothing. The code for calling the sound:
Code:
import flash.media.SoundMixer;
SoundMixer.stopAll();
import flash.media.Sound;
import flash.media.SoundLoaderContext;
import flash.net.URLRequest;
[Code] .....
Is there a way in AS3 to determine if a loaded sound file is still playing or not? I need to start an animation when a sound starts and stop the animation when the sound is done playing.
View 3 RepliesI have a problem with sounds in this movie. I have a sounds file that I would like to play as soon as the movie is loaded, but I dont want it to stream because I want to loop it and I want it to be done with AS. I saw a Tutorial where the sound would load as soon as the movie started but it wouldn't play until the play button was pressed. I want the song to play as soon as the sound is loaded. The Tutorial is Creating a Volume Control Silder. [URL]
View 5 RepliesI am currently designing an interactive magazine through flash and was wondering if there is any way that the user of the magazine upon opening it can be prompted to record their name and then have that voice recording played back when they perform certain actions while interacting with the magazine?
View 2 Repliesdoes anybody maybe know how to track/trace the current position of a sound file while it is playing?So that it is updated every frame or second?I figured something with trace(sound.position) onEnterFrame, but didn't succeed in realizing this yet.
View 1 RepliesThe problem I have is I click the play button and start playing. Then I click next and when I click play for another song the songs overlap. How can I stop whatever song is playing and start playing the new one? Has to stop the prev song when I click play_brn.
[Code]...
While recording the flv is saved inside applications/stream/samples/audio.flv. But it is not working properly.[code]
View 1 RepliesI'm trying to load sound dynamically into a clip and then play it randomly. The AS I came up with works great if the sound is embedded and I use the .attachSound() method instead of loadSound(). Now, when I load it dynamically and use the code below, the sound plays very fast and at a higher pitch.
Code:
var crows = new Sound(this);
crows.loadSound("Raven.mp3", false);
crows.setVolume(100);
[Code].....
I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
[Code]...
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 RepliesThe thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
Need to make a character start to talk when the sound starts and stop talk when the sound stops so I'm using this:
[Code]...
I have to play a sound file and show the progress of the sound file being played. I am using import flash.media.Sound; import flash.media.SoundChannel; But the PROGRESS event gives theprogress of loading of file. I want to know of much of the song has been played and how much more is left.
View 3 RepliesHow do I make a flash website begin on a frame other than number 1? I hope there's a way to do this.
View 3 RepliesI need to tell a external movie (.swf file) to start play when I click on a button. I have made a site in dreamweaver where the topframe is in flash and the middleframe in html and the bottomframe in flash. I have 2 buttons on the topframe and I want when I click on one of them the
bottom flash file starts to play.
I have made a site in dreamweaver where the topframe is in flash and themiddleframe in html and the bottomframe in flash.I have 2 buttons on the topframe and I want when I click on one of them the bottom flash file starts to play.
View 1 RepliesI am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
I'm building an application that's basically a frame in that another SWF file is displayed. My application loads SWF files generated by a server and displays them. As memory consumption increases over time, it it necessary that I unload the current SWF from time to time and replace it with a new SWF. I use SWFLoader to load the remote SWF file. I create a new SWFLoader object for each new SWF and remove the old SWFLoader as soon as the new SWF can be displayed. Now my problem: SWFLoader sporadically does not start playing the loaded SWF. All of the SWF files that I load start with the same set of instructions. When all goes well, the SWFLoader gets some ProgressEvents and then an Event.INIT. After that the SWF starts playing. In some cases, however, I only get the progress events, but the INIT is never fired. In that case the SWF doesn't start playing. The number of bytes received reported by the progress event is the same as in the case when it goes right.
View 1 RepliesI DO NOT KNOW FLASH - let's just get that straight. I do not know actionscript, and I'm not familiar ith the interface. But I do know how to open a document, drag a .flv into the frame, add a playback skin, and save a swf for use on a web page.
The problem is that the videos all start playing on default. I'd like the user to have to hit the "play" button to play the video so that they are not inundated with sound when the page loads.
I am a flash newbie, how can I get the flash to start playing before it is finished loading on a website? I embedded a FLV file into a flash and I'm going to export it as a SWF, I want it to start playing the movie before it's done loading so people don't think that it's not working.
View 2 RepliesWhat i need is a code that forexample is placed on the first frame of my movie. Also i have there a stop(); code. What i need is on random time intervals, the movie to start playing from FRAME 2. Those intervals to be restricted maximum for 2-3 minutes. I mean for example not to wait an hour or so for the function to be executed.
View 3 Replies