ActionScript 3.0 :: Movie Clips Not Sliding Far Enough On X Axis?
Dec 10, 2009
I created a site by following a tutorial, and it has a small bug I dont know how to fix. The site consists of a menu of buttons, and when the buttoms are clicked, a movie clip slides into the screen from the left side. The problem is that occasionally the movie clip doesnt slide f
have two sets of movie clips. I'm communicating to these movie clips with another program via binary sockets. For the first set of movie clips: when it recieves its instance name, and a second number (InstanceName+#) from the socket, the named movie clip will jump to the frame corresponding with that number. for ex: if the incoming data from the socket is (mc7+3), then movieclip 7 will jump to frame 3.
For the second set of movie clips: when it recieves its instance name, and a second number (InstanceName+#) from the socket, the named movie clip will move location across the screen, by the y coordinate moving to the # given by the socket...thats a little confusing. for ex: if the incoming data from the socket is (mc4+500), then movieclip 4 will move so that it's y coordinate is at 500.
Here is my code:
Code: var socketBuffer:String = ""; s.addEventListener(ProgressEvent.SOCKET_DATA, onDATA); function onDATA(e:ProgressEvent):void{ [Code]....
i got rid of some errors. the first part is working where the movie clips jump to the frame they are told to so no errors there. but when i try to move the movie clips in reference to the FADER array, (along the y axis) nothing happens. (look at bold part of code)
theres also another method i'm willing to approach but i'm not sure how to go about it. rahter than using the FADER array, I would rewrite the code for each individual movie clip, so that it says "if incomign data names a movie clip and gives a number, change the named movie clip's y coordinate to the incoming number"
I've been trying to find a solution to this for a while, but I haven't had any luck.I'm making a menu system that uses sliding movie clips instead of separate pagesbut when you click on the 'study at UWS' button, the nested slider kind of goes nuts, until you press on of the side buttons.
The tutorial shows how to make the movie clip slide on the horizontal (x) but how do I configure the code to use both horizontal and vertical (y)?I know this is asking for alot but I really am a novice at this actionscript stuff Do I just add a dest=" _root.ynew ;" and "pos = this.y ;" some how to this code?
stop () ; MovieClip.prototype.move2 = function () { dest = _root.xnew ; pos = this._x ;
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){ _root.gotoAndStop(1); }
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code: //Don't worry I have an OnEnterFrame function here; //attachedObj= the character; figure= the MC name of the character; attachedObj = attachMovie("figure", "figure"+1, 1);
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
I am trying to construct coordinates with distance in meters on the x-axis and time in seconds on the y-axis, without using the timeline. How can I draw the divisions on the x-axis and y-axis ? Or I better draw the whole thing.
var my_shape:Shape = new Shape();addChild(my_shape); my_shape.graphics.lineStyle(3, 0xFF0000, 1);my_shape.graphics.moveTo(50,50);my_shape.graphics.lineTo(50, 300);my_shape.graphics.lineTo(500, 300);
I've put together this simple code for an SWF with three roll over images (called: Training, Resources and Contact).When I roll over Training I would like the symbol Training_txt to tween its alpha to 1 (from 0) and tween its y axis to 220 (from 83).When I roll out of Training I would like to run the two tweens in reverse.
This works fine for each of the three roll over images, so long as each tween is allowed to fully execute before a new tween is started. The problem arises if i quickly move the mouse curser between the three roll over images before the previous tweens have finished executing.In this instance, the tweened objects start to behave erratically. They usually return to their original position as per the roll_out tween but then start jumping between y axis 200 and y axis 83 (without tweening - they just appear).
I'm making a chart where the x-axis needs to have dates and y-axis names. The lenght of the bar is longer when the date is later. But I want to stack multiple bars on eachother. for example This is the code I have so far
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) { play(); }
also if you want to see what the problem is, here's the website in it's infancy (700k)
I have a flash movie with about 350 frames, each frame is a mixture of text and between 1 and 10 images, later on I might add some download file links, website links and videos to some of the frames. I have a menu at the top of the movie which lets you flick between each frame, so by clicking the menu button "image 20" you are taken to frame 20, click menu button "image 135" and you are taken to frame 135 and so on, very simple. I also have 2 buttons at the bottom of my movie, these buttons let you go backwards and forwards through the frames. If you are on frame 50 and click "forward" button, then you go to frame 51, click the "back" button on frame 50 and you would go to frame 49.
At the moment I simply use Actionscript Code: on(release) { gotoAndPlay(4);} Which of course would take you to frame 4.
My movie has nothing else, that's it, very simply and very little action-scripting on each button. At the moment my movie just flicks between each frame which doesn't always look very nice, so I want to change it so that the frames do a slide effect. So if you are on frame 15 and click the "forward" button, it would slide from frame 15 to frame 16, so as frame 15 slides to the left hand side, frame 16 would slide in from the right hand side. Or, if you were on frame 21 and clicked the top menu button "image 320", then frame 21 would slide to the left hand side and frame 320 would slide in from the right hand side.
And it would do the slide animation seamlessly and smoothly, I saw some examples online which didn't look very smooth when doing a slide, so it would be good if I could make it as smooth as possible during animation. I have search around online and the only examples I can find are image galleries, which seems to have action-scripting far beyond my capabilities at the moment, or they work in a way that is not any good for what I want to do. I use action-scripting 2, but I could change this to action-scripting 3, I am also using CS4.
What I'm trying to do is something of a jumping character in a platform game. My problem is that no matter where I place the character, it's jumping to a certain height on the stage, rather than to a height relative to the movie clip's original position. As if I'm telling it to jump to a global y coordinate, when what I really want it to do is move it "n amount" in the y direction. Here's what I have so far, this is the code I placed on the movie clip itself.
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
I would like to use a movie clip such as a rim from a car and rotate it on its x axis centered and then move it along the screen according to how much of the screen has loaded.here is what I have so far sorry it may be a little messy:
stop(); //rotate the rim rim_mc.addEventListener(Event.ENTER_FRAME, rotateRim);
[code]....
NOTES: the function rotateRim works correctly rotating the rim the var xpos provides me with the correct position i would like my X position to be and traces it out perfect upon test if trace is coded for it.
I have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
i got 3 movie clips on my logo and im using scale up and scale down for each other on Mouse_OVER and Mouse_OUT.i would like to make scaled up logo to be on absolute top.[code]
We have a movieclip mc1 with another movieclip mc2 inside of it. We are creating an instance of mc1 on the stage through actionscript and need to be able to reference mc2. We have tried various methods to do this but had no success.
