If I have SWF's that I am using for UI elements in a game, and in these SWF's there are layers with Movie Clips and these clips have only one frame in them - do I need to explicitly put a stop() in there for optimal performance?I'm curious if these movie clips sit there and loop with only one frame and in the end hurt the game's overal FPS
View 9 RepliesI'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
If I have SWF's that I am using for UI elements in a game, and in these SWF's there are layers with Movie Clips and these clips have only one frame in them - do I need to explicitly put a stop() in there for optimal performance?
I'm curious if these movie clips sit there and loop with only one frame and in the end hurt the game's overal FPS
I've set a list of movies symbols playing at different time line individually and put them all together in 1 frame on the main timeline. However, i'm thinking of playing those symbols 1 at a time without changing the main timeline. Each of those symbols has the stop(); on them. However, it doesn't seem to work as i thought it would be. Is there anyway i could create a button, and while clicking on the button itself, it plays the 1st symbol and stop before playing the next symbol ? Sorry, i haven't put up any codes yet. A newbie here doing his final major project.
View 3 RepliesIm breaking my heart to try and figure this out. Basically I have a movie clip (Test), which I want to jump to a specific frame when one of 7 other movie clips are clicked. I can get it to work when I tell it to just go to a specific frame. But when I try and create and array for each of the frame numbers nothing happens.The script I have is as follows:
[Code]...
i've got some movie clips on the stage on the first frame of an fla file. The mcies have event listeners to navigate to differnet frames on the timeline. Some of the frames to which we navigate have FLVPlayback components while others dont. i'm using some code for soundchannel in this fla, to create an array and load differnt music at a btn click, so that when we go to a certain frame we get some music. This works, no overlapping music.
The issue, that when we navigate to a frame with an flv that has an audio track, the the music that's playing on a different frame just wont stop. And another issue, when we navigate from the flv frame by clicking the mc that listens for the sound channel, the flv audio track wont stop playing and we get cuckaphonia.
[Code]...
Basically I have a flash website built on different frames of the timeline, the simplest way I think.Some of these frames have movie clips embedded into them using the flv playback component class.The problem I have is the following, the site works fine and videos play fine, but whenever I navigate offa part of the website to another, from a frame to another - the sound of the clips that were playing keepsplaying on the background and never stop and it keeps building up every time I navigate of.f each page.I want to remark that I believe is not only the sound that keeps playing "invisible" but the whole clip butThis is the AS code for my buttons on an example frame, would you be so kind to tell me what I should add or change
stop();cvbtn15.addEventListener(MouseEvent.CLICK,onClick25);function onClick25(event:MouseEvent){ gotoAndStop(27);}showbtn15.addEventListener(MouseEvent.CLICK,onClick26);function
[code].....
I've set up a simple enter frame loop to adjust the alpha on a grid of movie clips ("bubbles") using a distance formula from the mouse pointer.I've got a hunch that while this works fine, there's a more efficient or processor friendly way to do it.
grid of mc's created here....and pushed into an array
stage.addEventListener(Event.ENTER_FRAME, loop);
function loop(e:Event):void{ for each (var j in bubbArray)[code].....
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Repliesokay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
[Code]...
i got 3 movie clips on my logo and im using scale up and scale down for each other on Mouse_OVER and Mouse_OUT.i would like to make scaled up logo to be on absolute top.[code]
View 6 RepliesWe have a movieclip mc1 with another movieclip mc2 inside of it. We are creating an instance of mc1 on the stage through actionscript and need to be able to reference mc2. We have tried various methods to do this but had no success.
View 3 RepliesI have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
[Code]...
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesIt's me again and I'm running into a problem. So, I have this movie clip that is nested inside multiple movie clips. I want to tell Flash to perform an action when that movie clip hits another movie clip in the main timeline. It's just collision detection for a game using the hitTestObject code. I was thinking of using MovieClip(root), but that won't work since it's nested so much.
View 15 Replies