I was just wondering: When using the NumericStepper-component, is it possible to have a range from say 100 to 200 with all integer values in bewteen (i.e. stepSize = 1), but have the value increase/decrease by another value (e.g. 5) when pressing on of the arrows?
View 2 RepliesI want to have a dynamic integer reference.
For instance
ActionScript Code:
var heart:int = 5;
var stalker:int = heart;
[Code].....
Obviously stalker traces as "5" while "heart" is "7". However, I need to make stalker a pointer reference to heart.
when I try to type cast something, there r 2 ways to do it:if var integer holds a integer (Uint)
text_txt.text = integer as String;or text_txt.text = String( integer );
but sometimes when I want to pass a value to a function both ways don't work and only one way works, when should I use option 1 and 2???
i am having problems with setting the default value of the numericstepper. what is happening is that each time i change the value of Ath in the numeric stepper then change the frame the Ath value changes to it's max value. this happens with all of the numericsteppers that i set a default value with using actionscript. all relevent code is bellow along what each frame is for/does
[CODE].....
I have a RadioBtnGroup with (8) RBtn, and also One NumericStepper which uses the change property to address a changeHandler, and to count appropriate values up or down. At the moment I can only select the first RBtn and the changHandler' associated with it, but now I'm trying to find a way to use the change property of the NumericStepper multiple time (as per One RBtn to One changeHandler) within a switch or case statement ??? To try to avoid to use more than the One NumericStepper. Note: I do have to use One changeHandler per RBtn! as all the values from one to the other are different.
View 1 RepliesIs there a way to make NumericStepper shows leading 0 to numbers which is below 10 ?
(like 01, 02, 03 ... 09, 10, 11)
I have this code for uploading files to a PHP-script. It works fine when I place my NumericStepper(id="sida") outside the DataGrid but when I try to put it inside, Flex can't find the property "sida". What code goes where to solve this, anyone?
Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:com="*" headerHeight="8"
[code]........
I need to set the text value of the ComboBox and numericStepper when an item in a list is pressed. I understand that the value of the ComboBox and NumericStepper is read only. How can I force these components to show the value that I want?
View 3 RepliesI have a NumericStepper in my stage, and I have a Keyboard listener which listens for pressed keys.The listener works fine until I change the value in the NumericStepper.I think it's the textField in the NumericStepper that ruins it.
But i've tried
myNumericStepper.textField.enabled = false
and
myNumericStepper.textField.selectable = false;
But nothing works.
I have a keyboardEvent which listens for pressed keys. I also have a NumericStepper. If I change the value in the NumericStepper, the keyboardEvent stops working (I think the reason is that the textField in the numericStepper, or the numericStepper itself, gets active). So, I've tried alot of things.
numericstepper.textField.enabled = false
numericstepper.textField.selectable = false
numericstepper.textField.editable = false etc...
But nothing seems to work.
I have a numericStepper that has a change" listener that works just fine when using the up/down keys on the stepper (I can retrieve the value of the numericStepper). However, if the user manually types in a value and then clicks away from the stepper,From researching the web, I know that the "change" event is only activated via the up/down arrows on the numericStepper OR when the user presses the enter key in the numericStepper text field.y problem, I cannot retrieve the manual value typed into the numericStepper.The ".value" property always contains the last value set by the up/down arrows or pressing Enter
View 8 RepliesI have a NumericStepper declared as a UIComponent:
<![CDATA[
private var component:UIComponent;
component = new NumericStepper();
]]>
I need to change the .maximum value of the NumericStepper but due to the UIComponent not having a .maximum property the following code fails with the error: 1119: Access of possibly undefined property maximum through a reference with static type mx.core:UIComponent.
component.maximum = 11;
how would I define a property in this scenario?
I have a datagrid in Flex 4 with a NumericStepper as editor for a numeric value. I can set pre-defined maximum and minimum values for the NumericStepper, but I need to be able to have different limits for each row in the DataGrid. How can I do this?
This is the code for the datagrid:
<mx:DataGrid x="0" y="45" width="272" height="525" dataProvider="{dp}" variableRowHeight="true" editable="true" id="equipmentDG" verticalAlign="middle">
<mx:columns>
[Code].....
but now I get a StackOverflowError when I click on the cell to change the value. I posted a new question regarding that here: [URL]
I want to customize the images on increment and decrement buttons in spark numericstepper and I trying the following in my css file. But it doesnot work for spark numericstepper.
s|NumericStepper
{
downArrowDisabledSkin: Embed(source="assets/componentImages/downArrowDisabledSkin.png");
[Code].....
I am trying to use the NumericStepper component in Flex and would like to give its textField (not just the whole thing) an id but not sure how. I have already given an id to the NumericStepper itself but would like to give an id to its textInput field.
View 1 RepliesTwo questions concerning the numericStepper component and I think they both have to do with how to access the textfield part of the component.
1. How do you change the color of the textfield border in the numericStepper component.
2. I'm using the numericStepper to step up/down by increments of .25 (25 cents) and would like it to always show 2 decimals. But when it reaches a whole number (like 25) it will not show the 2 decimals. Do I treat this like a textfield to force the text to have 2 decimals? And if so, how do I access the .text?
I have a DataGrid with a NumericStepper as the item editor for one of the columns. The numeric stepper is supposed to get its max an min values from the data for each row. My MXML is like this:
<mx:DataGrid x="0" y="45" width="272" height="525" dataProvider="{dp}" variableRowHeight="true" editable="true" id="equipmentDG" verticalAlign="middle">
<mx:columns> [code].....
I want to restrict my NumericStepper so that you can't type invalid characters into it (like a comma). I'm trying this, and it works:
<s:initialize>
stepper.textDisplay.restrict = "0-9 - .";
</s:initialize>
<s:NumericStepper id="stepper" />
Except the negative sign can't be typed anymore, even though I specify it. If I do it directly on a TextInput, it works:
<s:TextInput restrict="0-9 - ." minimum="-10" />
Why doesn't this work?
I have the following NumericStepper:
<s:NumericStepper id="estimertTidCell" value="{isNaN(hostComponent.estimertTid)?0:hostComponent.estimertTid}" stepSize="0.5" maximum="5" change="hostComponent.estimertTid=estimertTidCell.value"/>
When i set the value to e.g. 1.5 through the NumericStepper and store the value, the alert in the following code correctly displays 1.5:
private var _estimertTid:Number;
[Bindable]
public function get estimertTid():Number {
[code]....
Problem: My problem is that once the NumericStepper refreshes, or reloads the variable, it displays 2 instead of 1.5, or 4 instead of 3.5 etc. Anyone got any ideas of what is causing this behavior? I would think that by setting the stepSize=0.5 it would correctly display those decimal numbers.Additional information: When i display the same variable in a spark Label, the value is correctly displayed as a decimal number.
When using the NumericStepper I want to force the user to only be able to edit the value using the NumericStepper's up and down arrows. I do not want the user to be able to type in a value directly. How can i do this in flex 4?
View 2 RepliesThis is just a simple problem, i have two integers (for example)
var myInt:int = 3357;
var myOtherInt:int = 10;
Then i ask flash to trace myInt divided by myOtherInt
trace(myInt / myOtherInt);
And in the output menu i get 335.7 as the traced number and i need to get an integer which would be 335.
I'm working on a game were your health variable will add 1 hp automatically every second if the health variable is not equal to 100. How would you do that?
View 1 RepliesSomehow I cannot get the value of an integer inside a for-loop.
I define the vars like this:
ActionScript Code:
public class Fig2 {
private var a1_m1:int;
[Code].....
This gives me a: "1067: Implicit coercion of a value of type Array to an unrelated type int."
Is there a simple way to test whether an integer is odd or even withing a conditional statement? Example:
ActionScript Code:
if (integer /*insert code that checks for odd or even*/){
/*execute whatever*/
};
I've just seen a statement like this.
Code:
if (_root.map._width>"3000") {
_root.map.larger = 0;
}
Why 3000 put in quotes. Does it consider as a string on this expression?
[Code]...
Then the numericStepper is drawn as if it is squished to 20% its normal height. If I pre-set mySprite width and height before adding the numericstepper, the trace output is 0,0 after adding it and it is not displayed at all. Is there some way I can make the sprite only adjust to correctly fit the numericStepper OR resize it afterwards without distorting the numericStepper component?
I try to increment each 2 hours but I don't know how to proceed.
View 2 RepliesI'm having some trouble converting a string to an integer. Here is my code:
var str:String = e.currentTarget.name as String; // Getting values like "song1", "song2"
str = str.replace("song", ""); // Changes it from "song1" or "song2" to "1" or "2"
var num:int = str as int; // SHOULD be converting the "1" to 1 and "2" to 2
trace("num:" + num + ", str:" + str);
The trace is always outputting:
num:0, str:1
num:0, str:2
etc..
The str value is there, but when it gets put into num then it zeros out.
I have 40 movieclips, with the instance names p[1-40] (for example, p14 or p32). I want them all to do something in order, so I'm using a 'for' loop. In simplified psuedo-code, it looks like:
for 40 {
variable = variable + 1
p[variable]
[code].....
I was trying to display a number: 2893604342.00. But, when i am displaying it it is displayed as: -2893604342.
Following is the code snippet ...
avg += int(totalData[i][col.dataField]);
I have even replaced it with Number, but it's still showing the same negative number.