[Code]...
Then the numericStepper is drawn as if it is squished to 20% its normal height. If I pre-set mySprite width and height before adding the numericstepper, the trace output is 0,0 after adding it and it is not displayed at all. Is there some way I can make the sprite only adjust to correctly fit the numericStepper OR resize it afterwards without distorting the numericStepper component?
Here's a very simple AS3 project consisting of one class which draws a rectangle. When I run it, the rectangle is clearly larger than 100x100 pixels.
Edit: I know that it isn't correct because, though I have my screen resolution set to 1280x800, if I set the width to 500 it takes up almost all of my screen.
package
{
import flash.display.Sprite;
import flash.events.Event;[code]....
how to addChild bitmap in Sprite. I have one bitmap image in my libary. Now, I want to add it into my "Sprite" display object. I can put my libary's bitmap into movieClip but I want to do in pure as3 .
View 2 RepliesI am trying to create a dynamic scrolling list in Flash AS3. When I create a list, I set it to be an initial length. Later, I add more objects to the list which is outside of the original size of the list. I want to be able to scroll down the list and see all the objects. My scrollbar just moves the list's y position. However, every object that is drawn outside the original list size is not shown when I run the program and scroll. I have a list object which has the function below when I need to add content to the list. When I initialize the list, I give it an initial height and width which I use to create a mask.
public function AddPlayers(pPlayers:Array, pScrollBar:ScrollBar):void {
var player:Player;
trace("happened again");
for (var i:int = 0; i < pPlayers.length; i++)
player = pPlayers[i];
[Code] .....
I'm trying to do a PrintJob and before I send the sprite away, I want to organize the info so I thought putting multiple Sprites in a single "printable" sprite would be the way to go. The weird thing is, when I addChild one of the Sprites, it turns back.
Here's my code:
Code:
public function impressionImage(toPrint:Sprite, textToPrint:String):void {
//Cr�ation de la PrintJob
[code]...
I removed all the lines that were in comments, and here's the code that's left. The problem comes with the "contTextEtImage" sprite. If I keep it like this and I print it, everything is fine, but if I put it inside "printable", it turn all black, as if it was a huge black bitmap.
I am adding a sprite to the stage on the event of a button being pressed. The problem is that it hides behind my other sprite that is attached to the stage on runtime. I have also tried messing around with addChildAt() but with no success.The other sprite that is attached on runtime is added to the stage through a class. Could the sprite within the class be disrupting the layering/z order?
View 5 RepliesIf I want to have a mouseEvent and add an image to a sprite I need to add the image in the class and not after? See where I have used addChild?
[Code]....
I have defined some sprites in a class .as file and I want to put them in the screen. How can I do this?
View 2 RepliesI created a class, extended the sprite class, and now in the constructor I am trying to set the Sprite's width and height properties which are inherited from the DisplayObject. However, after I set this.width and this.height, and print the values, I get 0 for both.
What the heck is going on? When I view the livedocs I see that DisplayObject has width and height listed as public properties. I have been able to instantiate a Sprite directly, and set the width and height after it's been instantiated, so I don't get it.
package {
import flash.display.*;
public class ScrollBar extends Sprite {[code].....
I've got a sprite which I want to temporarily hide... But changing the .visible property doesn't do what I expect. The code looks roughly like this:
[Code]...
I created a new AS3 document (550px by 400px) and added the following code to the first frame.
However, when I run this, I see nothing painted on the screen at all, the screen remains completely white.[code]...
I'm doing a simple rotation on a sprite but there's a weird behavior where the sprite does not rotate around it's top left. I think I'm rotating along the top left of the test class instead of the sprite child. I would like to rotate the rectangle around it's top left corner (kinda like a clock hand). The code is pretty short so I'll let the code + pictures explain my problem:
package
{
import flash.display.Sprite;
[Code]....
I've read a lot of stuff about rotating around a fixed point, I've tried doing it with movieclips instead of sprites, I even copy pasted a tutorial on rotation and nothing works.
I created two empty Sprites to serve as layers, bottom_spr and top_spr. When clicking a button, a MovieClip appears and follows your mouse, until you click, then its position is fixed. As soon as the button is clicked, I addChild the MovieClip to the correct Sprite. Unfortunately, the layer system doesn't see to work, because they are layered in the order I place them, the Sprites don't seem to influence it. How is this possible?
private var ground_spr:Sprite;
private var units_spr:Sprite;
public function Game() {
addEventListeners();
ground_spr = new Sprite();
[Code] .....
Both of sprite.width and sprite.scaleX can be used for scale a sprite. Is possible sprite.scaleX depends on screen size?
View 2 RepliesIt has been a great resource of the years. No my problem. I am trying to dynamically resize a sprite that has a line drawn into it. Here is my code:
[Code]...
first i have 2 sprite.. it`s mcproduct sprite and mcproductpane sprite . mcproductpane is a parent of mcproduct sprite.. so inside mcproductpane there a several mcproduct sprite.this is a script of mc prodcut
PHP Code:
[Code]...
The problem is i want to set a button in here(mcproductpane sprite), this button will unload / make dissappear an image that i load using loader class in mcproduct sprite..how can i make this happen?when i want to make a button in mcproductpane sprite which the function of the button it`s to unload/make an image that i load using loader class in mcproduct sprite disappear.
Everytime I google this question I see confusing information about masks and blends, none of which seems to directly apply to what I think should be an easy thing... There are three Sprites involved here...the lowest layer sprite is pretty much a background. I want to overlay a translucent Sprite on top of the background and then I want the third, top-most Sprite to act as a hole, so that the area inside the third Sprite is completely transparent, so that the background sprite is completely visible. How would I go about doing this dynamically (i.e. dynamically drawing the masking sprite and hole using the Actionscript graphics calls)?
View 4 RepliesIs it possible to set the height of the sprite depending on the height of an textfield inside that sprite? I'm creating a box with a textfield inside it, but I want the box to be sized depending of how much text it is in the textfield..
View 9 RepliesI have a brick class where I have created a rectangle using flash.display.graphics.I am using this brick class to create a grid of 10 X 10 in another class called grid using new brick() in a for loop.I have another class called ball where I have created a circle with flash.display.graphics.The problem is that I want to remove / destroy individual bricks when the ball hits the bricks on Event.ENTER_FRAME which is not happening.the error I get is shown only for the last brick that is created in a for loop.ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display:isplayObjectContainer/removeChild()
at grid/ball_movement()// my function in enter frame event
The code I wrote in ENTER_FRAME is
[code].....
I have a brick class where I have created a rectangle using flash.display.graphics.I am using this brick class to create a grid of 10 X 10 in another class called grid using new brick() in a for loop.I have another class called ball where I have created a circle with flash.display.graphics.The problem is that I want to remove / destroy individual bricks when the ball hits the bricks on Event.ENTER_FRAME which is not happening.the error I get is shown only for the last brick that is created in a for loop.[code]
View 1 RepliesIve got a question that feels like it should be easy but I cant figure it out. Suppose I have 2d grid of square sprites on the stage, lets say 20 by 20 (400 sprites). Another sprite moves accross the stage on top of the grid. The moving sprite and the 400 sprites below it share a common parent. So heres the question: How do I find out which of the 400 sprites the moving sprite is currently over? And heres an extra wrinkle: I lied, the sprites are not square they are of differing shapes so I cant do a simple math calculation.
All I can come up with is something like hitTestPoint(), but then I would have to call it 400 times wouldnt I? That is probably the most inefficient way to do things. Is there a function like whatsUnderThisPoint(p : Point) which will return a list of every sprite on the display list that contains p?
I have a sprite and when it is added to the screen, I want it to be added on top of everything else on the stage.What is the best way to ensure that a sprite when added, is on top of everything and not hidden behind other sprites?
View 4 RepliesI am trying to use the scale9Grid on a Sprite but it keeps throwing an error.
Code:
private function drawNameFile() : void
{
var nameField : Sprite = new Sprite();
var background : Shape = new Shape();
[Code].....
q1)when would I use a sprite in a game? eg private var sp:Sprite=new Sprite();
Currently I load bitmaps and bitmapdata fro frames.
q2)My player class extends Sprite but does Sprite class speed things up or it is better to use when I have many images?
q3)If I use a Sprite how t=do I get the Bitmap out of it to use with bitmap collisions test?
I am trying to add a dynamically drawn vector to a loop using a sprite,I 'm not to sure what i'm missing. ( using cs4)
View 2 RepliesI don't know, whenever I try to make a sprite animation and I click on Trace Bitmap, it shows a loading bar, I wait and wait, and when about more then half is done loading, and a little is left, the screen freezes, and I cant even click cancel to stop the loading bar.
View 6 RepliesIn AS3 I turn a sprite(spButton) visible property to false initially.AT some point I turn on the image property so it is visible but nothing is displayed when i do?It works fine if I dont make the image invisible on load.
private function imageLoaded(event:Event):void { var image:Bitmap = new Bitmap(event.target.content.bitmapData); spButton.addChild(image); spButton.x = 240; spButton.y = 350; IntroCanvas.addChild(spButton); spButton.addEventListener(MouseEvent.CLICK
[code]...
I want to rotate a sprite in 3d using AS3. The example below, tells how to do rotate an image using MXML and AS3, however, I want to do it through pure AS3
View 2 RepliesI am completely in the woods here - i have a sprite with a shape drawn in there (there are two different sprites in the example.) At any given point, I need to get the x and y value of the topmost point of the shape. The sprite does rotate so it's going to change at any point as well. I don't even know where to begin here
View 2 RepliesHow do I create multiple instance of the same sprite with different name as in shap1,shape2, shape3, etc. Then the function will change the color of the sprite through getChildByName? Whether I create a new instance, the old sprite will be overwrite by the new sprite and when I call the old "shape1", it will be null. How do I retain all sprite?
var c:UIComponent = new UIComponent();
var s:Sprite = new Sprite();
private function shapeCreate() {
[code].....