I am adding a sprite to the stage on the event of a button being pressed. The problem is that it hides behind my other sprite that is attached to the stage on runtime. I have also tried messing around with addChildAt() but with no success.The other sprite that is attached on runtime is added to the stage through a class. Could the sprite within the class be disrupting the layering/z order?
View 5 Replies
[Code]...
Then the numericStepper is drawn as if it is squished to 20% its normal height. If I pre-set mySprite width and height before adding the numericstepper, the trace output is 0,0 after adding it and it is not displayed at all. Is there some way I can make the sprite only adjust to correctly fit the numericStepper OR resize it afterwards without distorting the numericStepper component?
how to addChild bitmap in Sprite. I have one bitmap image in my libary. Now, I want to add it into my "Sprite" display object. I can put my libary's bitmap into movieClip but I want to do in pure as3 .
View 2 RepliesI am trying to create a dynamic scrolling list in Flash AS3. When I create a list, I set it to be an initial length. Later, I add more objects to the list which is outside of the original size of the list. I want to be able to scroll down the list and see all the objects. My scrollbar just moves the list's y position. However, every object that is drawn outside the original list size is not shown when I run the program and scroll. I have a list object which has the function below when I need to add content to the list. When I initialize the list, I give it an initial height and width which I use to create a mask.
public function AddPlayers(pPlayers:Array, pScrollBar:ScrollBar):void {
var player:Player;
trace("happened again");
for (var i:int = 0; i < pPlayers.length; i++)
player = pPlayers[i];
[Code] .....
I'm trying to do a PrintJob and before I send the sprite away, I want to organize the info so I thought putting multiple Sprites in a single "printable" sprite would be the way to go. The weird thing is, when I addChild one of the Sprites, it turns back.
Here's my code:
Code:
public function impressionImage(toPrint:Sprite, textToPrint:String):void {
//Cr�ation de la PrintJob
[code]...
I removed all the lines that were in comments, and here's the code that's left. The problem comes with the "contTextEtImage" sprite. If I keep it like this and I print it, everything is fine, but if I put it inside "printable", it turn all black, as if it was a huge black bitmap.
If I want to have a mouseEvent and add an image to a sprite I need to add the image in the class and not after? See where I have used addChild?
[Code]....
I have defined some sprites in a class .as file and I want to put them in the screen. How can I do this?
View 2 RepliesI created two empty Sprites to serve as layers, bottom_spr and top_spr. When clicking a button, a MovieClip appears and follows your mouse, until you click, then its position is fixed. As soon as the button is clicked, I addChild the MovieClip to the correct Sprite. Unfortunately, the layer system doesn't see to work, because they are layered in the order I place them, the Sprites don't seem to influence it. How is this possible?
private var ground_spr:Sprite;
private var units_spr:Sprite;
public function Game() {
addEventListeners();
ground_spr = new Sprite();
[Code] .....
am creating a shooting game. my main class in first frame now i want to add the title in front of the game if a adding frame in front make it stop function. the game play runs what can i do?
View 1 RepliesI'm trying to have a class file which can add objects to the stage via addChild; however, when I call addChild from within the class file, I get the error "1180: Call to a possibly undefined method addChild." I've tried importing flash.display.* and that doesn't fix the problem. Does the class file have to extend Sprite or MovieClip to be able to add objects to the stage?
View 8 RepliesI have downloaded Box2d ([URL]) and created a project that looks like this: [URL]. catalyst is the green cube and it has the base class "shapes.box", it is inside "world" which has the base class "wck.World". What i want to do is to add another "catalyst" from the library inside "world" when i click on add_btn. I tried to accomplish this by this code:
[Code]...
Symbol 'buttons', Layer 'Actions', Frame 1, Line 41061: Call to a possibly undefined method addChild through a reference with static type Class.
I have the followings:
_p:Player (which is a MC)
a1:Animation1 (which is a MC)
_p.addChild(a1); //doesn't display anything
_p.stage.addChild(a1); //displays a1
Why won't the MC display a child without using his stage?
I'm trying to resolve an issue that reared it's ugly head yesterday.Frame one of main timeline I have the following code:
Code:
import flash.display.MovieClip;
import flash.events.MouseEvent;
[code]....
The newMC doesn't show up.If I add 'parent.' in front of the addChild then it appears.mc_LibItem has a base class of "flash.display.MovieClip" and is exporting for ActionScript and on frame one.For grins I created a new .fla and began messing around with the same addChild idea and it worked.
I created a class, extended the sprite class, and now in the constructor I am trying to set the Sprite's width and height properties which are inherited from the DisplayObject. However, after I set this.width and this.height, and print the values, I get 0 for both.
What the heck is going on? When I view the livedocs I see that DisplayObject has width and height listed as public properties. I have been able to instantiate a Sprite directly, and set the width and height after it's been instantiated, so I don't get it.
package {
import flash.display.*;
public class ScrollBar extends Sprite {[code].....
I've got a sprite which I want to temporarily hide... But changing the .visible property doesn't do what I expect. The code looks roughly like this:
[Code]...
I created a new AS3 document (550px by 400px) and added the following code to the first frame.
However, when I run this, I see nothing painted on the screen at all, the screen remains completely white.[code]...
I'm doing a simple rotation on a sprite but there's a weird behavior where the sprite does not rotate around it's top left. I think I'm rotating along the top left of the test class instead of the sprite child. I would like to rotate the rectangle around it's top left corner (kinda like a clock hand). The code is pretty short so I'll let the code + pictures explain my problem:
package
{
import flash.display.Sprite;
[Code]....
I've read a lot of stuff about rotating around a fixed point, I've tried doing it with movieclips instead of sprites, I even copy pasted a tutorial on rotation and nothing works.
somewhat understood the basics of adding and removing children, however, I am facing another problem. After using the removeChild Function, I can't seem to add another child.For example:
ActionScript Code:
var attachedMC = new (getDefinitionByName("Content1") as Class)()
Page.addChild(attachedMC);
[code].....
I have a main "shell" swf which, by clicking several buttons, will load/unload various external swfs into a Placeholder_mc which resides on the main timeline in Shell.swf In the documentation and tutorials I've seen a couple different methods, and I'm not sure I quite understand the difference, or at least the reason you would use one over the other...In the 1st method, you can just add the Loader object using the addChild() method:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
Placeholder_mc.addChild(myLoader);
This will apparently add myLoader to the display list once it has completely loaded.The 2nd method, you supposedly can add the Loader.content; however, it appears you can only do this once the content has completed loading, so you need to incorporate an event handler with the contentLoaderInfo object:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
[code]....
What are the pros/cons of adding the entire Loader object, as opposed to the Loader.content and vice versa?
Both of sprite.width and sprite.scaleX can be used for scale a sprite. Is possible sprite.scaleX depends on screen size?
View 2 RepliesIt has been a great resource of the years. No my problem. I am trying to dynamically resize a sprite that has a line drawn into it. Here is my code:
[Code]...
first i have 2 sprite.. it`s mcproduct sprite and mcproductpane sprite . mcproductpane is a parent of mcproduct sprite.. so inside mcproductpane there a several mcproduct sprite.this is a script of mc prodcut
PHP Code:
[Code]...
The problem is i want to set a button in here(mcproductpane sprite), this button will unload / make dissappear an image that i load using loader class in mcproduct sprite..how can i make this happen?when i want to make a button in mcproductpane sprite which the function of the button it`s to unload/make an image that i load using loader class in mcproduct sprite disappear.
Everytime I google this question I see confusing information about masks and blends, none of which seems to directly apply to what I think should be an easy thing... There are three Sprites involved here...the lowest layer sprite is pretty much a background. I want to overlay a translucent Sprite on top of the background and then I want the third, top-most Sprite to act as a hole, so that the area inside the third Sprite is completely transparent, so that the background sprite is completely visible. How would I go about doing this dynamically (i.e. dynamically drawing the masking sprite and hole using the Actionscript graphics calls)?
View 4 RepliesIs it possible to set the height of the sprite depending on the height of an textfield inside that sprite? I'm creating a box with a textfield inside it, but I want the box to be sized depending of how much text it is in the textfield..
View 9 RepliesI have a brick class where I have created a rectangle using flash.display.graphics.I am using this brick class to create a grid of 10 X 10 in another class called grid using new brick() in a for loop.I have another class called ball where I have created a circle with flash.display.graphics.The problem is that I want to remove / destroy individual bricks when the ball hits the bricks on Event.ENTER_FRAME which is not happening.the error I get is shown only for the last brick that is created in a for loop.ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display:isplayObjectContainer/removeChild()
at grid/ball_movement()// my function in enter frame event
The code I wrote in ENTER_FRAME is
[code].....
I have a brick class where I have created a rectangle using flash.display.graphics.I am using this brick class to create a grid of 10 X 10 in another class called grid using new brick() in a for loop.I have another class called ball where I have created a circle with flash.display.graphics.The problem is that I want to remove / destroy individual bricks when the ball hits the bricks on Event.ENTER_FRAME which is not happening.the error I get is shown only for the last brick that is created in a for loop.[code]
View 1 RepliesIve got a question that feels like it should be easy but I cant figure it out. Suppose I have 2d grid of square sprites on the stage, lets say 20 by 20 (400 sprites). Another sprite moves accross the stage on top of the grid. The moving sprite and the 400 sprites below it share a common parent. So heres the question: How do I find out which of the 400 sprites the moving sprite is currently over? And heres an extra wrinkle: I lied, the sprites are not square they are of differing shapes so I cant do a simple math calculation.
All I can come up with is something like hitTestPoint(), but then I would have to call it 400 times wouldnt I? That is probably the most inefficient way to do things. Is there a function like whatsUnderThisPoint(p : Point) which will return a list of every sprite on the display list that contains p?
i created a flash-projector with cs4. after i'am executing my flash.exe, my already opened task-manager is still in front.Is it possible to set the task-manager in background.
View 1 RepliesI have 3 movieclips in separate layers. inside each they have buttons.I want the mc i hover to move to the front. right now they overlap.see attached. the green cricle appears behind the other 2.
View 2 RepliesIf you go to the Portfolio page im trying to design 3 links that open up a mini section.. if you notice, each link stl has the other links overlaping the clip, because all links are on the same level..I have tried a couple of scripts that say they bring the clip to the front on rollover but have found nothing that works..
View 6 Replies
