I am completely in the woods here - i have a sprite with a shape drawn in there (there are two different sprites in the example.) At any given point, I need to get the x and y value of the topmost point of the shape. The sprite does rotate so it's going to change at any point as well. I don't even know where to begin here
View 2 RepliesI usually created a movieclip in flash and assign it to actionscript class(using export for actionscript method in its property panel) that exteds movieclip.but sometimes movieclip is just too heavy for that,is there any possible way to draw a sprite directly in flash(not by code),and control it in actionscript-3
View 4 RepliesI am trying to place a rectangle Shape inside a square Sprite, as its child. But, the child rectangle show up outside the sprite, instead.
Also, the click handler event of the sprite reports the error "The supplied DisplayObject must be a child of the caller".
Code:
package
{
import flash.display.Sprite;
import flash.display.Shape;
[Code].....
I am trying to create a county map of Illinois using x,y coordinates from a shp file. I have the x,y coordinates and the county names saved in a CSV file that I have no problem reading in via ActionScript 3 (and the map looks great), but in order to save time in my future application I would like to save each county shape as a permanent shape in my application and give them labels, i.e. Sprite1 (label='Champaign').
In case this is not possible I am trying an alternate solution: I create a new sprite (var spr:Sprite = new Sprite();) for each county, draw it using spr.graphics.drawPath, and give it a name (spr.name='Champaign') and then 'push' it to a vector of sprites (var xy_sprites:Vector. = new Vector.();). This would be great, but it doesn't work when I try to loop through each sprite in the vector and add an EventListener to that Sprite to pop up the name when you MouseOver any of the counties. Is the Sprite data type not the correct way to go about this or am a missing something about Sprites?
Some of my code to draw the shapes and save in a vector:
function drawXYMap(str:String):Vector.<Sprite> {
var arr:Array = str.split("
");
var xy_Sprites:Vector.<Sprite> = new Vector.<Sprite>();
[Code].....
I performed a benchmark test memory consumption by three DisplayObjects - MovieClip, Sprite, and Shape.
Below are results and method used. I just wanted to create instances. Test with adding instnaces to display list showed a slight difference in terms of memory consumption.
Observations: Sprite uses from 16 to 22% with average 18% less memory than MoviClip.
Shape uses from 42 to 55% with average of 46% less memory than MovieClip.
Shape uses from 32 to 42% with average of 35% less memory than Sprite.
[Code]...
So I'm playing with a project where I want my class to be able to use the functionality of the Graphics class without needing to extend Sprite/Shape. My goal aside, I guess I'm confused as to how it works at all? It's methods don't seem to return anything, and since it's added as a child property of the Sprite/Shape classes , I can't seem to figure out what it's actually doing? It's also one of those classes that can't be instantiated.
At this point, I'm just plain curious. EDIT: I should provide more clear distinction of what I'm looking for as answer. I have read the documentation, but the documentation doesn't account for what AS3 is actually doing. I'm looking for educated guesses about the programatic relationship between Graphics and the the classes that use it.
I have drawn intersecting lines. The user can click on a region inside the angle formed by the two lines.When the user clicks inside the area, the small region formed by the arc between the two lines showing the angle should change. How can I do that.the region between the intersecting lines is sprite object to dispatch event listener, but the arc is shape object.
View 1 RepliesI've got a sprite which I want to temporarily hide... But changing the .visible property doesn't do what I expect. The code looks roughly like this:
[Code]...
I'm doing a simple rotation on a sprite but there's a weird behavior where the sprite does not rotate around it's top left. I think I'm rotating along the top left of the test class instead of the sprite child. I would like to rotate the rectangle around it's top left corner (kinda like a clock hand). The code is pretty short so I'll let the code + pictures explain my problem:
package
{
import flash.display.Sprite;
[Code]....
I've read a lot of stuff about rotating around a fixed point, I've tried doing it with movieclips instead of sprites, I even copy pasted a tutorial on rotation and nothing works.
ActionScript Code:
package {
import flash.display.MovieClip;
public class Base extends MovieClip {
public var baseHP:int = 50;
var newRect:Shape = new Shape();
1046: Type was not found or was not a compile-time constant: Shape. 1180: Call to a possibly undefined method Shape. What does it mean by "undefined method"? I am somewhat of a newby, so sorry if there are any stupid errors
Whenever I add shape hints to a shape tween the shape disappears in the between frames. I am using CS5 on Vista. I using files from [URL]to practice.
View 2 Repliesneed to draw the shape of a existing movieclip which is irregular shape.
View 2 Repliesneed to draw the shape of a existing movieclip which is irregular shape.
View 1 RepliesId like to know if there is a way to do a shape hitTest.Not as the normal hitTest would do, but shape colliding another shape, not the rectangleof a movieclip.It can be in a movieclip.
View 23 RepliesI created a class, extended the sprite class, and now in the constructor I am trying to set the Sprite's width and height properties which are inherited from the DisplayObject. However, after I set this.width and this.height, and print the values, I get 0 for both.
What the heck is going on? When I view the livedocs I see that DisplayObject has width and height listed as public properties. I have been able to instantiate a Sprite directly, and set the width and height after it's been instantiated, so I don't get it.
package {
import flash.display.*;
public class ScrollBar extends Sprite {[code].....
I created a new AS3 document (550px by 400px) and added the following code to the first frame.
However, when I run this, I see nothing painted on the screen at all, the screen remains completely white.[code]...
[Code]...
Then the numericStepper is drawn as if it is squished to 20% its normal height. If I pre-set mySprite width and height before adding the numericstepper, the trace output is 0,0 after adding it and it is not displayed at all. Is there some way I can make the sprite only adjust to correctly fit the numericStepper OR resize it afterwards without distorting the numericStepper component?
using the shape tool you can draw basic shapesthen using the subselection tool you can re-shape them by relocating certain points
What i want to do is create a tween whereby one of the points is movedthe problem is you have to convert to a symbol first and after you have done that you cant change the shapes shape.so how do i go about using a motion tween to change the shape of a shape?
Both of sprite.width and sprite.scaleX can be used for scale a sprite. Is possible sprite.scaleX depends on screen size?
View 2 RepliesIt has been a great resource of the years. No my problem. I am trying to dynamically resize a sprite that has a line drawn into it. Here is my code:
[Code]...
first i have 2 sprite.. it`s mcproduct sprite and mcproductpane sprite . mcproductpane is a parent of mcproduct sprite.. so inside mcproductpane there a several mcproduct sprite.this is a script of mc prodcut
PHP Code:
[Code]...
The problem is i want to set a button in here(mcproductpane sprite), this button will unload / make dissappear an image that i load using loader class in mcproduct sprite..how can i make this happen?when i want to make a button in mcproductpane sprite which the function of the button it`s to unload/make an image that i load using loader class in mcproduct sprite disappear.
Everytime I google this question I see confusing information about masks and blends, none of which seems to directly apply to what I think should be an easy thing... There are three Sprites involved here...the lowest layer sprite is pretty much a background. I want to overlay a translucent Sprite on top of the background and then I want the third, top-most Sprite to act as a hole, so that the area inside the third Sprite is completely transparent, so that the background sprite is completely visible. How would I go about doing this dynamically (i.e. dynamically drawing the masking sprite and hole using the Actionscript graphics calls)?
View 4 RepliesI have a filled Shape, and a BitmapData that is the same width and height as the Shape's bounding box. I need to cut the Shape from the BitmapData (basically draw the BitmapData onto the shape...) [URL]I use the rather hackish method of:
public static function cutPoly(img:BitmapData, s:Shape, bounds:Bounds):BitmapData {
var temp:BitmapData = new BitmapData(bounds.width, bounds.height, true);
Main.inst.stageQuality("low"); //hack to kill anti-aliasing
[code]....
Is it possible to set the height of the sprite depending on the height of an textfield inside that sprite? I'm creating a box with a textfield inside it, but I want the box to be sized depending of how much text it is in the textfield..
View 9 RepliesIs there an option to rotate a shape 90 in Flash CS5 Professional?
View 2 Repliesi have rectangle movie and i want to make it triangle or round so it show round in the page. can i do so with i embed it or it must be done in flash before i export swf?Also i forgot how you make transparent area in flash?
View 1 RepliesI'm using Flash CS4 on a MacBook Pro with Snow Leopard OS X 10.6.1.I've added two shape tweens on two layers in my main timeline. The SWF tests fine. All is good.I close the document.I open it up again and the tween shapes are gone and there are only regular frames between the transitional shapes in their respective keyframes.I've already added shape hints, and they are completely restored when I convert the intermediary frames back to shape tweens.Exporting to SWF after restoring the shape tweens works fine.
Closing and then opening the FLA still results in the shape tweens reverting back to regular frames.Exporting an SWF from the newly opened document shows no shape tweening as it is gone from the main timeline.Is this a bug or am I doing something wrong?
I want to make a Shape Tween where a text of a small size increases in size. I followed a tutorial, and I did what it tells me: I put the starting text in the first frame, create a blank keyframe at the end where I put the bigger text, I then use the selection tool to right-click on both text objects in the video clip and select Break Apart which I do twice, and then I should be able to create a proper Shape Tween... but when I click on a random free and either right-click or go to Insert, Shape Tween is greyed out. How come? I also tried the other Tweens, but they don't do anything.
View 5 RepliesI am using flash as3.I have some shapes I have drawn on the screen. They are made using:
graphics.beginFill(0x00ff00);
graphics.drawRect(0,0,50,50);
graphics.endFill();
to draw them. Each shape has a different color for fun (different beginFill).How can I get the color of the shape under the mouse pointer as I move the mouse around the shapes?I see two choices so far but don't know how to do either of them: Get color under the mouse point get the color from the shape properties (preferred)how to do either of these...
I was wondering if there any way to change movieclip shape, when it on stage by as2.
View 1 Replies