ActionScript 3.0 :: Playing FLV File (XML Document) In Grid?
Feb 22, 2009
I am trying to play every .flv file that is in my xml-document at the same time in a grid.
I am getting this error:
TypeError: Error #1034: Type Coercion failed: cannot convert XMLList@26749469 to flash.media.Video.
at videoklass/Loaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
Code:
Select allpackage{
import flash.display.*;
import flash.events.*;
import flash.media.Video;
import flash.net.*;
[Code] .....
View 2 Replies
Similar Posts:
Jan 16, 2010
If I have a flash document, that's set at 12 FPS.... can I make certain movie clips play at like 30 FPS even though the main document is set to 12?
View 2 Replies
Nov 21, 2011
I have a flash document that I want to loop twice after playing most of it, then play the rest of the file on the third playthrough and stop. Here is what I have so far.
[Code]...
View 4 Replies
Aug 31, 2009
I have some animation (programmatic, I'm NOT using keyframed animation in timeline), and some music I want to play in the background. Once the music file reaches the end (about 30 seconds long), I want to trigger the end of the animation functions.I figure I could either use an actionscript timer to trigger the end of the animation or a keyframe with actionscript that is placed on the timeline near the end of the song but these methods assume knowledge about the duration of the wave file. If I changed the framerate or updated the external wave file, these triggers would possibly no longer sync upIs there some sort of event listener or other detection method for an audio file to signal it has finished playing? Or maybe there is a way to get the duration of the audio file to use in the timer
View 3 Replies
Jul 6, 2009
I'm trying to get a boolean variable from my document class to be recognized in one of my other movieClip .as files, but i'm not sure how.
If I could pass a number or string variable from my doc class to my movieClip class that would also work just fine.
View 1 Replies
Feb 3, 2012
I'm currently working with the OLAPDataGrid component and got stuck at a relatively simple task: I want to style the last row of the grid differently from the rest, so my cell item renderer needs to know whether he's rendering the last row with content in the overall grid, including those rows currently not rendered because they are outside the visible grid space. AdvancedGridListData's rowIndex property only gets me the row index of the renderer relative to the range of visible grid rows, i.e. when I scroll down the grid, a data item with an index greater than 0 gets the rpw index = 0.
View 2 Replies
Oct 9, 2009
I need to create a simple multiplication grid where children will fill the grid. Its an empty grid at the begining, when they start the time start as well.Its a grid of 10 x 10. when they enter the last number, the grid should show what they did wrong and the time they spend. It's an idea of how it could work but if anyone has something that looks like this.
View 6 Replies
May 15, 2010
any one send me the css file to have good look n feel for advance datagrid.
View 2 Replies
Jul 5, 2011
I want to make a square grid of fixed side length but varying grid number using code.That is, the number of grids should be specified by the user (say 3*3) and after pressing a button, the stage should be broken into 3*3 grids.I don't want any code, just a method on how to do it. I have tried it by using simple loops but the method just fails for no reason I can figure.
View 5 Replies
Mar 31, 2010
Whenever I add paddingRight to a column in the flex grid, it adds the padding to the header as well.Is anyone familiar with how I can add paddingRight just to the column and not to the header? Below is the column code where I was specifying the padding.
<mx:DataGridColumn width="60" headerText="Type" dataField="Grade" headerStyleName="headerLeft" textAlign="left" draggable="false" resizable="false" headerRenderer="GridHeaderRenderer" paddingRight="5"/>
View 1 Replies
Mar 19, 2007
I really like the thumbnail gallery for its simplicity and beauty. But I would like to ad or vertical scroller (I'm unable to find it here too, maybe I'm blind, just I'm more at the end of my seeking options) or a make a grid thumbnails, that will show 2 columns of thumbs and 5 pictures in each columns, then under the 2 columns i would like to ad a sort of arrow or button that if my gallery have more then 10 pictures it will go on the next thumbnail list. I'm not looking for any extra fading effects or special movements. Just would love to have a single thumbnail grid on side, with option to have lists of thumbnails by 10 if there is more then 10 pictures or so.
View 14 Replies
Feb 22, 2009
Im trying to play every .flv file that is in my xml-dodument at the same time in a grid. Im getting this error that i dont really know how to deal with.
[Code]...
View 1 Replies
Sep 15, 2009
I was using the script on the [URL] page to upload files and I get 403 on my mediatemple grid server. (It works fine on localhost). I tried adding the following to .htaccess:
SecFilterEngine Off
SecFilterScanPOST Off
But it gives me Internal Server Error - 500
View 1 Replies
Dec 2, 2010
Created an mp3 player that works fine, but i need the track name, artist name, track timer, to be shown aswell?and i dont have a clue how do go about doing this.
View 2 Replies
Dec 15, 2009
I have a problem that I have not found a syntax error or logic error to explain. It appears to be an obscure problem related to playing a sound file and graphic positioning in the same file. My next step is to look for any known bugs. I have posted the file at. URL] When the page loads you will see a list of selections. Do not click any of the html Play buttons In the graphic arrow pointing to the right is the play button click it and a default file will start. Click the pause button (which will be green while the selection plays) Then click the play button again. The knob that moves while the song plays, will begin moving from the position it was at the time pause was clicked.
Click the stop button (arrow facing left with vertical line at tip) Choose a selection from the html list by clicking the Play button next to it. Then click the play button in the player display. The title of selection will appear in the title area. repeat the original steps (play, pause, play) This time the knob that moves while song plays, snaps back to the start and moves from start, rather than from the pausedposition.
[Code]...
View 7 Replies
Sep 24, 2009
I have a mx:Grid component in my flex application. But I would like to resize it by clicking and dragging in the border. This component doesn't allow doing that.I want to put a panel in each gridItem of this Grid component and resize it.
View 1 Replies
Jun 24, 2008
I'm building a small editor that allows users to place electrical components onto a grid so that they can see how electricity works. I have built a grid using an array and for loops and attach movieclips dynamically to that grid. What I want the moviclips to do is to look in the four spaces either side of itself i.e. up, down,left and right.I have managed to pull the grid coordinates out of the grid which enables me to tell the clip which grid space to look at but have been unable to successfully get the code to work.Here is my code:
myGrid = [[1,1,1,1,1,1,1,1],
[1,0,0,0,0,0,0,1],
[1,0,0,0,0,0,0,1],[code]....
View 1 Replies
Apr 12, 2010
I am new beginner, is it possible the covert flex data grid to CSV file format with out use any backend (java,php ..) file?. Because I tried with out use bankend. is it convert or not?
View 1 Replies
Aug 27, 2009
i'm trying to play flv file using programming but problem it's only work with only html file.when i play with stand alone SWF File it's not playing flv file? what should i do to run as a stand alone application do i've to desing into Adobe AIR ?
View 2 Replies
Apr 7, 2009
i have a button that when it is pressed plays and loads an external flv file. this part works fine but directly after the flv video is finnished i want to load in an swf file. does some one have an idea how to do this? first show flv and then load swf?
this is the code as it looks now..
[Code]...
View 16 Replies
Jan 21, 2011
I've a grid view in flex, one of the columns is rendered like this:
[Code]....
now I've a problem that the function in button click is not being recognized. It says "call to a possibly undefined function" even though it was defined. What is wrong with this? How do i make a button in a grid call a function in the same mxml file??
View 1 Replies
Sep 1, 2009
I have 2 files one that says it is a flash document with the extension .swf the other says Shockwave Flash Document also with the extension .swf.
How do I save my .fla file as a flash document (.swf)? I dont think I want it to be a shockwave flash document.
What is the difference between the two?
View 1 Replies
Nov 1, 2011
I'm just getting into flash and i would like to know how you run more than one as3 file from the main .fla file?
Is it possible to use more than one document class file?
View 2 Replies
Aug 12, 2009
I've calling file names from an XML document, for example: <file>thisGraphicab.swf</file> Then when I call the graphic, the graphic with the matching file name does not exist, but similar named files do exist. For example: thisGraphicab does not exist but thisGraphicbb does exist. Flash will load the thisGraphicbb.swf file in place of the file actually called.
Is there a way to remedy this? I want flash to fail when the file requested does not exist. When you type the name graphics/thisGraphicab.swf into the browser address bar, the file name is changed by the browser to be thisGraphicbb.swf, and it displays, but here again I need it to fail when something like this happens. I know this seems odd, but there's more to it in the end. Anyway, this is what I need to take care of now.
View 6 Replies
Oct 3, 2011
It seems simple, but it doesn't seem to be working I have 2 as3 files as classes "mainclass.as3 (this is the document class)" and GamePlay.as3
the GamePlay class works flawlessly on it's own, but when i try to create the var to access it ... var gp:GamePlay=new GamePlay(); ... i get the following error.
I have looked at tutorial etc, but i cant get it to work i am currently getting the following error.[code]...
View 1 Replies
Nov 6, 2011
Is Flash a part of Captivate or do I need it to be able to put interactive quizzes into a document. It sort of sounds like Captivate 5.5 is all that I would need. My basic task is to take a PDF file and/or a MS word document and add interactive quiz questions to the document. I don't even need to record them to a database. I have been trying to learn what a bunch of these Adobe products are and what they do and don't do for over a week and finally I got some real help in this forum this morning.
View 4 Replies
Apr 25, 2010
I'm just wondering about the difference between using an external .as file as a Document Class vs importing it via some timeline code like:
[Code]...
View 1 Replies
Dec 13, 2002
how to use a parsed xml document in a flash file. I'm a novice and would like to know how to start from the scracth.
View 4 Replies
Jul 24, 2005
I'm developing an interactive CD. I need to be able to allow the user to open Word and PDF files. I'm not sure how to do this. I've tried using getURL, but that doesn't work. I'm a bit saturated and can't think how I can do what I need.
View 3 Replies
Apr 10, 2010
I can't do many simple things in AS3 that take 1 second to do in AS2,
All I want to do is attach a movieclip to the stage via a .as file that ISNT the document class.
So for examples sake lets say I have Main.swf - Main swf file with a movieclip called "PreloaderGUI". Main.as - The document class, this loads Preloader.as. Preloader.as - This preloads the movie and attaches PreloaderGUI.
View 8 Replies
