my intro movie is supposed to open the main website when it is finished playing. it does open the main site, but in a new window and pop up blockers have to be disabled for it to work (Internet explorer and fir fox). here is the code i used for the flash intro.
import fl.video.VideoEvent;
function showMessage(e:Event):void {
trace("Finished");
[code].....
I'm playing an flv file inside flash player (swf). I want to open a pop-up window if user clicks the movie. I'm calling a js window.open function from the flash file (by onRelease event), but the bloody IE pop-up blocker blocks my pop-up. What can I do in order to pass this pop-up blocker?
View 3 Replieshow to detect pop-up blockers? I just visited a site that has a very nice way of detecting if the client's browser has pop-ups blocked.
http:[url]....
It presents the visitor with an alternative page with a message that informs the user about the pop-up blocker and gives them a link back to the home page. I think the alternative page is http:[url]....
im using this code
Code:
navigateToURL(new URLRequest("http://www.knorcedger.com/"), "_blank");
and i use firefox, which blocks flash from opening a new tab. I read around internet, and i find out that it may be possible to make it work with javascript.
I can bind in an AS3 project fine--just import the classes and it works as it does in Flex. Not so with a fla. The first binding works, but not after. I'm assuming this is because the compiler is not mxmlc and does not write code when it reads the bindable metadata tags, so no property change events are fired when a value changes. So, no real binding.
View 1 RepliesI am making a SUDOKU generator(ActionScript2.0), which would (for now) generate the full and correct sudoku table. To do that I need to use recursive functions for calculating all the possible values. The problem is that when I try to run my program I get this error :
Code:
256 levels of recursion were exceeded in one action list.
This is probably an infinite loop.
Further execution of actions has been disabled in this movie.Is it possible to somehow work around this limitation?
I'm loading in youtube data and the xml fetched from youtube is like thousands of lines long. Going through this whole xml practically steals all power from the flash and makes the loader-view freeze.
View 1 RepliesMy application pops up help windows outside of flex on several occasions. I need to warn the user to allow pop ups from my app if they have the pop-up blocker on. Does anyone know how to determine this from inside of flex and then how to have the browser pop up the "allow pop ups from this site" thing after that?
View 3 RepliesI have seen popup blocker detection script in Javascript that will alert folks that a window did not launch due to a pop-up blocker. What I was wondering is, is it possible to detect that within flash and play a movie if a popup blocker is enabled? I need to forewarn folks that certain areas of this flash site require popups and that they have them blocked currently.
View 7 RepliesIm still new in Flex and currently working on capturing a flash game into a flv video file. Im using FileReference.save() to write the captured file in the user's system. It is working as of now but not the way I want it to be.Is there a way to bypass or automate the save dialog box when invoking the save() api of fileReference?
View 1 RepliesI have video player chrome buttons designed with HTML/CSS. The full screen button needs to tell Flash to go full screen, but Adobe forbids this Javascript-to-Actionscript interaction.I'm making a web based video player that supports many plugins - Flash, VLC, HTML5, iPhone's Quicktime etc... I would like all these players to share the same chrome buttons - play, pause, mute, volume slider, resolution picker, and full screen. These buttons are layed out with HTML/CSS.[code]This has caused me a lot of pain and agony. Whenever I need to make a change, I update the HTML and JS. This change is reflected across the VLC, HTML5, and whatnot players. But since Flash does not share the same HTML chrome buttons, I have to duplicate the changes in Flash/AS. So I'm looking for a better solution that reduces the amount of duplicate code. It doesn't have to be stylistically clean. I just want easy maintainability.
View 3 RepliesI have a website with a simple Flash animation behind some text and semi-transparent images as a background. I have used swfobject to embed it and set wmode opaque to make it display correctly in most browsers.For browsers without Flash, the user gets a static background image instead and would not know they were missing anything. However, Android users get the flash background on top of everything as per the known issue with how Flash content is rendered in the Android browser making the site unusable.
I have added a crude browser sniff javascript function to the swfobject code to prevent it from loading for any user agent whith 'Mobile' in it:
<script type="text/javascript">
if (navigator.userAgent.indexOf('Mobile') == -1)
{[code].....
The only problem I have left is for Android users browsing with 'Mobile View' turned off as the user agent pretends to be a desktop version of Safari (I think). I do not wish to disable the Flash animation for all Safari users. Is there a way of blocking it for just Andriod users - even if they have 'Mobile View' disabled?
Possible ideas include:detecting the Flash version with JavaScript or Flash. Does Android use specific versions (version numbers) of Flash which are different from the desktop equivalent? blocking the specific user agents used by Android devices with 'Mobile View' disabled.
I've got this Flash project where there are a number of different photo galleries that hold images. Now, I want Flash to be able to see how many pictures are available within a folder so it can create the right number of thumbnails.
At this time, you might think... well there are numerous topics about this issue and PHP is the answer. But I perhaps have a workaround and I was wondering whether it is an 'acceptable' one or if it poses to many problems.
How about I let flash create an 'experimental' loader that loads images rapidly, theoretically till infinity. This loader starts with 1.jpg, followed by 2.jpg, 3.jpg, etc... (also the names of the images inside the folder obviously). There is also an eventlistener added to the contentLoaderInfo stating:
ActionScript Code:
experimentalLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, checkFileEnd);
As soon as Flash is trying to open the file, let's say, 51.jpg and this file does not exist, the Event described above fires. This event will then tell Flash to stop counting since it apparently reached the end. The experimental loader will then be removed and the normal thumbnail loaders will be created up till 50.jpg.
I am working on a flash project (menu and a few pages) which will be run from a localhost and will load images as well as data from a mySQL tables (Wordpress in fact). As a result each piece of content loads relatively fast, however since I have several things to load on a page, the flash freezes for a second. The general idea is to show a nice short animation at that point to mask the loading and then show the fully loaded page, but the loading causes lag to the entire flash movie, including said animation. Presentation is important for this project but I'm a bit new to AS3 and can't find a working solution. Is there a way to make different movieclips to load their content and do their things independently at lower priority than actions outside of them, so that the global animation goes uninterrupted while the movie clip with the page loads its content.
View 0 RepliesClicking the button sends the text to a backend server where it does a profanity filter.I'm using an event listener to get a response from the back end. If there is no profanity, the swf does a navigateToURL.Unfornetly the url request is blocked by many browsers.When I skip the profanity filter and the navigateToURL is fired in the MouseEvent function then it doesn't get blocked
View 9 RepliesI'm busy with making a XML banner in AS3. It worked so far with the following code:
Code:
Select allvar xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
xmlLoader.load(new URLRequest("private"));
function LoadXML(e:Event):void {
[Code] .....
And it worked! It bypassed all the browsers popup blockers, but it brought in some new problems. Every time the .swf loops. The addeventlistener adds a listener. So if the .swf loops 5 times it will open 5 windows when I will click it. I've tried to use removeeventlistener but with no success so far. In the code without the popup bypass this problem didn't occurred. Probably due the new URLRequest. But I don't know how to use this in the javascript. The other problem is the string of the link. For some reason javascript deletes parts of the link when there is an question mark in it. Example:
If the link is [URL]
The link what will open is: [URL]
PHP Code:
var xmlLoader:URLLoader = new URLLoader() var xmlData:XML =new XML(); xmlLoader.addEventListener(Event.COMPLETE, LoadXML); xmlLoader.load(new URLRequest("private"));
[code].....
There was a recent Flash vulnerability found that allows for the potential of malicious attacks when someone uploads a flash file or a file embedded with flash (for example, a gif overloaded)According to the article, even a simple image can be hijacked.In php, the typical ways of checking a file type are by extension, and by mime-type.Using the simple example of an image, how would php properly vet a file (as is recommended in the article). Mime types can be spoofed, as can extension, and if the file is piggy-backed, what is the workaround?
View 2 RepliesSince I updated to the latest build of Flex Hero (4.5.0.19786) AdvancedDataGrids flicker in design view with Flash Builder Burrito preview. Has anyone run into this and if so is there a work-around besides dropping back a version?
Update 02 19:29 : This did not occur in previous Hero builds, e.g 18623.I am using the default Spark theme, nothing else particularly special.
Update 01 19:15 : I tracked down the problem to an instance of a custom (default custom, i.e the result of doing new->component based on AdvancedDataGrid) on the same form.
The component declaration:
<?xml version="1.0" encoding="utf-8"?>
<mx:AdvancedDataGrid
xmlns:fx="http://ns.adobe.com/mxml/2009" [code]......
The custom component instantiation. Note "fo" is a namespace representing the path to the package for which the custom component resides.
<fo:adgTest width="300" height="200">
<fo:columns>
<mx:AdvancedDataGridColumn headerText="blah1" />[code]......
It turns out that this custom version of AdvancedDataGrid causes the design view to break down. Very odd.
Update 03 2011-02-11 13:36 : A custom AdvancedDataGrid does not cause design-view breakdown unless I add columns to it.
Update 04 2011-02-11 15:13 : Filed as a bug: https:[url].....
I came across the following javascript code that creates a fullscreen pop up window from a rollover button (html/javascript) that appears to be unaffected by popup blockers in IE (or at least on my computers it's unaffected). However, when I adapt the button code to actionscript for use with a flash button it starts to trigger the popup blocker. figure out the correct actionscript to make this work without being blocked?
[Code]....
I'm more of a server-side and javascript programmer. I have never done much with Flash. I have a robust html form based on flash based swfuploader and I need to test it with Selenium 2 / WebDriver.The problem is, thatmovieContent.CallFunction('<invoke name="selectFiles" returntype="javascript">' + __flash__argumentsToXML(argumentArray, 0) + '</invoke>');\is not supported in Flash 10 ...What are we supposed to do ? If it was possible I could js.executeScript(script); But now I have to do some sort of movieContent.click() in my java junit/selenium tests but it doesn't trigger the select file window, it doesn't do anything.
View 1 RepliesHaving got into flash about a year ago, I have a fairly good understanding of as3, but I have never had any reason to learn as2. For an upcoming project, we were looking to use Scaleform GFx, with the UDK. (Unreal Development Kit) Trouble is, Scaleform only supports as2. From what I've been told, as3 is supposed to be better in just about every way, so I really don't want to learn a language that?s most likely on the way out, if I have any other options.
Is there any converters out there, that can convert script from as3 to as2? Or another workaround possibility, since flash communicates with the UDK by means of just calling a function, could I create an as2 file that could dynamically load an as3 file?
If a user has a pop-up blocker on, will it effect pop-ups within a Flex application. If I use the PopUpManager class in my app, is there the possibility that it would be blocked.(I'm writing about pop-ups within the app, not advertising pop-ups and pop-unders.
View 1 Replies