Is it possible to replace movie clip with a new with one of the same name? When I replace it, the new movie clip's colors and other attributes aren't affected by my previous code.
View 4 Replies
I have square box with simple animation. Now I want to change color of my movie clip. Is this possible to change my movieClip's box ? My square box instance name is "blueBox". I mean i want to specify tint value
View 1 RepliesFor example, I've created in Flash CS a movie clip CampfireMC, which contains child movie clip:
m_fire:FireMC
FireMC is an animation of flame CampfireMC controls playback of m_fire, for example, last frame of CampfireMC uses action code:
m_fire.gotoAndStop(m_fire.totalFrames)
And the question is how to replace (not delete/add, as m_fire.gotoAndStop(m_fire.totalFrames) will not work in this case) FireMC to another animation FireMC2?
I've tried the following trick, but it doesn't work
var campfire:CampfireMC = new CampfireMC();
campfire.m_fire = new FireMC2();
campfire.gotoAndPlay(0)
For example, I've created in Flash CS a movie clip CampfireMC, which contains child movie clip:m_fire:FireMCFireMC is an animation of flameCampfireMC controls playback of m_fire, for example, last frame of CampfireMC uses action code:m_fire.gotoAndStop(m_fire.totalFrames)And the question is how to replace (not delete/add, as m_fire.gotoAndStop(m_fire.totalFrames)will not work in this case) FireMC to another animation FireMC2?I've tried the following trick, but it doesn't work
var campfire:CampfireMC = new CampfireMC();
campfire.m_fire = new FireMC2();
campfire.gotoAndPlay(0)
[code].....
I have a flash movie instance name "headArea" I want to load a external swf and swop the movie inside the headArea - replacing the head.I have the following code:
clickIt.addEventListener(MouseEvent.MOUSE_DOWN, swopHead);
function swopHead(event:MouseEvent):void {
var loadit = new Loader();
[code].....
I have a flash movie on my web page and I have made some of the text inside the movie into buttons. The movie only takes up a portion of the page. I would like to replace the movie with another movie when somebody clicks the button.
View 8 RepliesIm able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I have a simple flash movie on a webpage.At the the end of the movie, I would like the player to disappear and be replaced by an image.As an example, imagine clicking play and watching a movie about Disney, then when the movie ends the player is replaced by an image which is a coupon to use at Disney.
View 1 RepliesHow do I replace a flash movie on a website with a quicktime movie?I don't even know where to begin.
View 2 RepliesI need to make timeline control class in as3, but I have some problems with replacing mcs. I want to remove one mc when it is on the particular frame and add other mc in that place.[code]...
View 4 Repliesit seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I'm having some real trouble getting .replace to actually replace something. Here's my code...
[Code]...
I can trace both newFiles[i] and keywords[i][whatever], but the replace doesn't replace anything. The regex is valid as well. I'm using regexr to test it, and it works perfectly there... but will not for me and I don't know why.
I have created a flash movie(Interactive Map) for my company and I have been asked to print out the file with our company Icon instead of regular flash icon.
View 2 RepliesWe have a site that comprises mainly of an embeded flash object containing navigation controls. All I want is to insert a small .swf movie that will play like an intro scene to the website before the main .swf loads for the site itself. All this means is I want to call up 1 flash object, play it through and then replace it with another once finished. This seems to be a relatively simple desire but after a couple of hours worth of forum-trawling.
View 3 Replieshow to replace a MC by another one placed in the library.
View 2 RepliesI've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI have in my root:
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
cursor.onEnterFrame=function(){
this._x=this.x+10;
if(this.hitTest(Mc_Obstacles.Obstacle)){
gotoAndStop(4);
}
}
I really have two questions: How do I affect both a movie clip and its child movie clip in the same function? and how do I pull info from one component into a function for another? My basic setup is a movie clip of font choices, one on each frame: "bodyText_mc." Each of these frames has a child clip "bodyText_mc.bodyText" with alignment choices for the font. For instance, the user picks "Script" in the first ComboBox and then picks "Align Right" in the second. (All of this text is static because I need more design control that I can get with dynamic text.)
First of all, I have a combobox "cbBodyFont" that I use to go from frame to frame on movieclip "bodyText_mc." This works nicely:
[Code]...
