ActionScript 3.0 :: Sending Data To Web Service?
Apr 7, 2009
I need to access the database using web service through CS3 i have tried accessing the database using Asp.Net page and it successed when i change just the URL of the Asp page and replace it with the web service URL it reports to me the follwoing error:
Error opening URL 'http://localhost/Trial/DAService.asmx' Load failed: HTTP Status = 500 Load failed: IO error: Error #2032: Stream Error. URL: http://localhost/Trial/DAService.asmx
and this error elimnates when i request the web service and not sending data in the URL as i send SQL query through URLVariable as follows:var variables:URLVariables = new URLVariables ();variables.SQLQuery = "select * from Employee";this code working with the .aspx page but when i use the web service it reports the previous error inspite the code written in web service is the same in the .aspx page.where in the web service i call a function in the constructor of the web service and this function gets the data from URL and then execute it
View 1 Replies
Similar Posts:
Apr 7, 2009
I need to access the database using web service through CS3 i have tried accessing the database using Asp.Net page and it successed when i change just the URL of the Asp page and replace it with the web service URL it reports to me the follwoing error: Error opening [URL] Load failed: HTTP Status = 500 Load failed: IO error: Error #2032: Stream Error. [URL]
and this error elimnates when i request the web service and not sending data in the URL as i send SQL query through URLVariable as follows: var variables:URLVariables = new URLVariables();variables.SQLQuery = "select * from Employee"; this code working with the .aspx page but when i use the web service it reports the previous error inspite the code written in web service is the same in the .aspx page.where in the web service i call a function in the constructor of the web service and this function gets the data from URL and then execute it as follows : if (HttpContext.Current.Request.Form["SQLQuery"] != null)
View 6 Replies
Aug 8, 2006
I have a Flash Web site for a small literary journal and am trying to switch over to my hosting service's mailing list manager for sending out newsletters. I see the HTML code for setting this up (available from my host), but do not know how to get it to work in my Flash site. (I did not build the site and know very little about Flash...I'm learning as I go in order to do updates.) It looks like the site currenly links to a PHP file to allow for sign ups to our newsletter. Can anyone tell me h how to get the HTML code to work on my site?
View 2 Replies
Dec 8, 2010
I have a ValueObject in Java Source Code with a java.util.Date or java.sql.Date attribute and in Flex-AS3 have a DTO mapped by [RemoteClass] using a Date AS3 Type.When I set a date in Flex with 2010-09-05 format YYYY-MM-DD in DateField component and send it to Java, java shows 2010-09-04 there is a difference of a day from flex to java
I'm using Java EJB Service + GraniteDS + RemoteObject to comunication.
View 1 Replies
Apr 9, 2007
I will be creating a program to use for data entry. I'll be studying zebras in kenya and I won't have the internet there as I'm recording the data. I'd like to be able to send the data I generate in flash to an external text file. I understand I need some sort of script to do that, but is this something I can run just on my machine? (I'll probably make the data into xml format).
View 1 Replies
Apr 10, 2007
I have an interactive Flash simulation that I have imported into SABA Publisher. I need for the Flash file to communicate with SABA, basically returning that the user has successfully completed the simulation. SABA is supposed to be able to receive data from Flash.
View 2 Replies
Sep 8, 2011
I have an html file and I'm using swfobject 2.2 to embed a flash file into the html file. This flash file is getting data from a web service, so it is trying to communicate with an "Internet-enabled location". I know and have read a lot about peolpe having trouble with this kind of problem, but I can't seem to find a solution for it. After this dialog box pops up I add the actual swf file and my project folder which is in wwwroot to the trusted location settings. This works fine, but only when I use the absolute file path in my browser.
[Code]....
View 0 Replies
Apr 28, 2010
I am bussy with a Flex Project with a data services. Flash builder installed Zend Framework with Zend_Amf.
When i run the project i get the error NetConnection.Call.Failed: HTTP: Failed. With chalers i say that Zend_Amf give the error: AMF data is incomplete (0 bytes of 0 bytes). Please check the recording limits in the Recording Settings.
I don't know what the problem means. I have searched on google, but i haven't found a good result. The Flex project code is:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code]...
View 2 Replies
Mar 17, 2011
I'm trying to read json data from a web service. The problem is that it seems URLLoader always return the data as XML so I can't decode the json string.
This is my code :
import com.adobe.serialization.json.JSON;
var myRequest:URLRequest = new URLRequest(<asmx, web service path>);
myRequest.method = URLRequestMethod.POST;
var variables:URLVariables = new URLVariables();
[code]....
not surprisingly i get an error on the json decode because as far as i can see using trace, i get xml data.Also i tried to run it on the browser, didn't help. Also tried to set the content type in the request to 'application/json', but it gave me an error.Even though i googled it, i couldn't fint what is the problem in my as3 code. It seems to me it should have worked.
View 3 Replies
Jul 22, 2011
Recently started to learn Flex technology to create RIAs. And now I want to create web based application of my created program in C++ builder. (flight info sys)
I liked the Flex because of it's cross platform and animation rich possibilities. One of the best web applications that i faced with in the inet is [URL] it has wonderful animating grid possibilities. Its server technology is in Java. How about converting this data service to PHP? That should read data from mysql in PHP.. I prefer working with PHP (as data service) and MySql (as rdbms) in Flex...
seeing animated grid is so cool :)) Switch to Grid mode!
Is it possible to convert it's Data service to php?
View 1 Replies
Sep 6, 2011
I just finished making a WCF service for a little hobby project.
[Code]...
View 3 Replies
Oct 27, 2006
All the web services tutorials I have reviewed always demonstrate how to setup the WebServicesConnector and bound to other input components on the stage (like the textinput component). I want to bind from a variable value in my Flash movie (ie; _level0.set_zone ) to somewheres in my WebServicesConnector. How can I set this up within my binding bound to value field?
View 4 Replies
Dec 9, 2010
Since my service, I would like to push data (messaging).
@Service
@RemotingDestination
public class LoginService implements ILoginService
{
[Code]....
With this implementation, nothing to do ... clients receiveid nothing.
So, how I push data from a service like that ? Is it possible ?
View 2 Replies
Apr 23, 2011
I have been working on a flex application with java, as i have used Life Cycle Data Service for communication, i wana know, is there any function of flex, where i can see the loading status in percentage, that how much record is being loaded.Problem is, if there is lengthy record, no body comes to know, whats happening with software, like in Comboboxes or Grids, users usually think it as a BUG in application, but ofcourse it is not.I need such graphical loader, which keeps on loading with proper status in percentage, until it receives all data from JAVA (SQL Server).
View 2 Replies
Jun 30, 2011
I want to know the size limit of data which can be fetched in case of HTTP/Webservice/RO.
View 2 Replies
Nov 23, 2010
I am consuming a web service and it is returning an object, how can I access this data? Below is the XML returned by the service.
[Code]...
View 0 Replies
Jul 9, 2009
I am writing a small flex application that will, eventually, call PHP services to perform its work. In the meantime, however, I would like to have it use local data in XML form to allow me to develop the Flex part independently of the data service.
What is the best way to do this? I want to emulate a service like this:
[Code]...
And invoke the service using issuerService.send(), populating my results as expected. How do I do this as though it were a RemoteObject instead, but keep my data local?
View 2 Replies
Mar 12, 2011
I'm using the data/services in Flash Builder 4 to access the php functions of a site within an Air based Crud, and figuring out the most efficient ways to work with the data objects that come back.
[Code]...
The data comes back as an associative array, which is fine if I want everything from it to be treated the same. But I'm not sure how I am supposed to pull a particular column from the array without having to go through a for loop to parse through it.. since right now the contact name would be at allContacts[i].name.
Basically I want to make a list of the names from the allContacts, so I want an array of allContacts[i].name to set as the data provider for a element. Is there any way to get that done without having to write a for loop to convert it into a new array or writing a new php function?
View 1 Replies
Apr 20, 2011
i am trying to add a web service in flex 4. This web service is deployed in share point 2010 in the intranet . I am able to see this wsdl file through browser but trying to introspect the service is giving an authentication error. I am getting the following error :-
There was an error during service introspection.
WSDLException: faultCode=OTHER_ERROR: Unable to resolve imported document at 'http://sql2008:47672/_vti_bin/StoryboardingDatabaseConnect.asmx?WSDL'.: java.io.IOException: Authentication failure
View 1 Replies
Aug 26, 2011
I am writing an application in Flash Builder 4.5. I am also writing a PHP Web service to access data from our MySQL database. This Web service will be made available to third party clients for them to develop applications to access our database as well, via SOAP.
Is there a big performance difference between connecting to the service in Flash Builder via connecting directly to the PHP file vs. connecting to a Web Service via SOAP?I would kind of like to connect to this service the same way that our clients will, to make sure things stay as uncomplicated as possible for future development, but performance is my main priority.
View 1 Replies
Nov 20, 2011
I have generated a service call to a service called ServiceName.getService() - I can successfully pull data displayed inside mxml layout elements, but, instead of displaying it, I just want to assign it to a global.
I always get an error on the second line below - apparently the value has not been fetched yet. I have also tried adding a listener, and setting the global value on COMPLETE, but that is apparently never called. (I am guessing this generated service call stuff does not actually trigger a COMPLETE?)
Short question is: how do you simply assign a variable after you have loaded it via a service data call. (Not just HTTP)
getServiceResult.token=ServiceName.getService();
GlobalVars.variablename = getServiceResult.lastResult.variablename;
View 1 Replies
Nov 24, 2009
I was using the serializing approach between Flash and PHP for the longest time before AMFPHP had its 1.0 release (wow...that was a long time ago...in 2006)!Serializing using a sepiroth's AS library paired with PHP's built in serializing functions worked and I didn't change it because it did the job.
Should I switch over to the AMF format and technology? One pro is that the data exchange is probably more efficient for AMF because it's a binary format.I've also see other scripting languages/frameworks such as Python/Django, Ruby/Rails supporting AMF. I guess AMF is also a standard format. Does each language serialize data differently?
View 2 Replies
Jun 9, 2010
I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
View 1 Replies
Dec 8, 2011
I wrote an app using adobe flash builder that makes an http data service call to a website.
When I build and launch the app it loads in my browser (the address in the broswer is C:Userspath omyapp.html) and works perfectly. However, when I upload the app to my website or even launch it from outside the project build directory, the HTTP service call fails with the popup
Security error accessing url
Destination: DefaultHTTP
Of course I googled this error and realized it may have something to do with a 'crossdomain.xml' in my web root directory. I tried this and it continued to fail.
Below was my crossite domain file
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.my_domain_for_http_service.com" />
</cross-domain-policy>
I'm using the free trial version of Adobe flash builder, but I do not see anything indicating that this has to do with the error.
Data from http service call is in xml format.
View 1 Replies
Mar 8, 2012
i am trying to put data in to combo box from php page using http service .there are 2 data records in the php page but instead of displaying data it displays [object object] [object object] in the combo box list
here is the mxml code
@namespace s
"library://ns.adobe.com/flex/spark"; @namespace mx
"library://ns.adobe.com/flex/mx";
[Code]....
View 1 Replies
Mar 12, 2009
I am having trouble on sending my data to the php..I am using flash cs 3 and the code is what I copied from a site. here's the code.[code]I pasted this code to the button named 'submit' and when I checked the script for errors, my script has an error! it says:Statement must appear within on/onClipEvent handler and I don't know what does it mean I am just newbie in flash cs 3.
View 1 Replies
Oct 26, 2010
I am working to send data from as3 to php and I am having a little trouble with it. I am new to both AS3 and php but at this point I think I am doing fine.The project is simple it just takes two values from as3 and send its to php. But apparently I am not able to send variables from as3 to php. Here is the code(its very simple code):[code]I am sure the insert.php is working as I hardcoded the values in insert.php and it inserts the rows. So, I am assuming that there is some problem with sending the data from as3 to php.
View 2 Replies
Feb 28, 2012
Not getting data back into flash from php that queries mysql data, think the problem is with my as3 code here?The php works, the as3 posts to the php ok, its the returning of the variables to as3 that I am unsure about and seems to be the problem?
public static function MineData():void{
var myRequest:URLRequest = new URLRequest("login.php");
var myLoader:URLLoader = new URLLoader();
[code].....
View 1 Replies
Apr 4, 2008
how to send out some data to a PHP file. I have a project set up already where you vote for some options and that sends, but now I need to add some input text fields for people to enter some personal information. What I have right now are two fields with the vars of "name" & "email"And here's the code that is sending out the information to the PHP file:
Code:
submit.onRelease = function():Void
{
sendVars();
_root.gotoAndStop(2);
}
[code]....
I've tried a couple of different ways but so far all of them failed, they included creating another function like the "sendVars" function to send with the submit button and I also tried placing some code into the "sendVars" function relating to the "name" & "email" vars.
View 6 Replies
Apr 6, 2008
I made a flash file were people can fill in there name and then press enter and lateron there name will be visable in a other textfield with in the clip.Now i made the following script in frame 1:
Code:
enter_btn.onPress = function() {
if (input != undefined && input != "" && input != "fill in please"){
email = input;
gotoAndPlay(2);
[code]....
this works great, 'input' will bring the filled in name too the textfield with the var called 'email'.Now i moved the 'email' var within a different movieclip with a instance name of form.When i fill in the name in the beginning the 'input' var and 'email' var are not communication nomore. How can i make sure 'input' will give the data to the 'email' within the other movieclip ?
View 2 Replies
