I have a program where I have several different movie clips, some on top of one another. And when I click I want the one I clicked and two or three others to switch places so the others underneath show. I can do this, but only for one movie clip. I can't make any other movie clip clickable without having an error saying I am redefining function clickListener.
View 1 RepliesI am making a website and am new to Flash and AS3. My site consists of 5 movieclip buttons. The buttons are programmed to move left or right depending on which button is open currently. I recently added a function that removes the eventListeners of these buttons so that you cannot click them while the tweens are happening (I was having major tween issues: stopped tweens etc) and then adds the listeners back when the tweens are done. However, after clicking through the site for a little while the active, clickable area of the button changes! I have no clue why this would be happening.
View 14 RepliesI am making a website and am new to Flash and AS3. My site consists of 5 movieclip buttons. The buttons are programmed to move left or right depending on which button is open currently. I recently added a function that removes the eventListeners of these buttons so that you cannot click them while the tweens are happening (I was having major tween issues: stopped tweens etc) and then adds the listeners back when the tweens are done.
However, after clicking through the site for a little while the active, clickable area of the button changes! I have no clue why this would be happening. This was not an issue before I created the function that removes the listeners so I assume that is the problem, but have no clue as to why. I am attaching the code for the tween functions for moveLeft and moveRight, the remove listeners function, and one button function.
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
I'm obviously a Flash novice. I have a simple movie that I need to modify. On click (or double click) I need to have a web site open in a new window. I am using CS4. I have tried adding a button and associating action script with it. I usually get a message saying that action script cannot be applied to the highlighted object.
View 5 RepliesDoes anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 RepliesI have a movieclip that moves on the X axis. Thing is, I need to make certain areas of it clickable... I have already tried a couple of things but didn't succeed.
View 1 RepliesI'm making a sort of easter egg hunt on a forum and would like to put the "eggs" in a small flash movies. But it should only be possible for one person to click the "egg" after that it dosn't show anymore (transperant movie).
I proberly need the movie to talk to an external file, but how do I do that?
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
So I have a movie clip called signInBtn and one called signOutBtn initially,
signOutBtn.visible = false;
but when a user signs in
signInBtn.visible = false;
signOutBtn.visible = true;
But after I do that, I can't click the signOut movieclip. I thought it might be because the signOutBtn was under the invisible signInBtn but that is not the case.
I made a help screen that pops up when the user clicks the "help" button. To accomplish this, I place the movieclip on the top layer, and set it's _visible to false. When the user clicks "help", visible = true, and BAM, help screen appears. The problem is that all of the buttons underneath my helpPage movieclip are still clickable.
View 2 RepliesI am making a game in flash cs5 as3 and what I want to happen is for when I click on a button that brings out my movieclip I want to beable to click on another movieclip and have it go to a certain frame, and I want the first movieclip to be deleted. Right now I have it so that if I click any where on the stage then it gets deleted, and thats good, but I want to beable to play a different frame in the movieclip i am clicking on.heres my code so far:
Code:[code].........
I want newketchmc to be able to click on the newmovieclip and newmovieclip goto a certain frame while newketchmc dissapears.I know I need to use an event listener but Im not sure where to put the event listener or how to even begin codeing the function that I want to do.
I'm attempting to create a clickable source from a movie clip so that when the user clicks on the movie clip another movie clip (specifically 'profilecover.swf') loads in a separate area of the screen. I've used the following code...
[Code].....
Say I can create 200 different movie clips on the stage when I press a button and want to destroy them when I click on them, how would I do this.
[Code]....
I have a movie clip (scrollBar) in my site that contains a line of other movie clips moving across the stage (scrollContent1-4). Only two of these are visible at a time, so I have lined them all up, repeated the first two at the end, and have the animation looping.
I want each of the scrollContent1-4 clips to be clickable. It's all fine on the first loop, but once the clip reaches the end and returns to frame 1 the clips are no longer clickable.
So I am working on an interactive piece that requires the use of pre rendered 3D animation clips with transparency. what I was curious about is... Would it be better to export the video as a series of PNGs (the longest is about 600 frames long) and import those into my movie clip or should I export the video as an FLV that is close to 400 Mb in size? Or am I completely missing a a better way to get this pre-rendered animation into my piece as a clickable movie cllip with transparency?
View 2 RepliesI have one button ( 4way road map and car ), inside of the button i have one car image How to set the particular clickable area ( car only ), i don't want to click 4way road or its doing another action or another clickable area. I attached my image, in that image i want click separately only the car.
View 3 RepliesI am developing and interactive CD application for kids that consists in a menu and two chapters with animations and exercises. To select the chapter I have an "Accordion" style menu with draggable panels. In each chapter panel I have a button which upon being clicked should direct me to the chapters first frame. The problem is it doesn't.
View 9 RepliesI Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies