I have a movie clip with a sound at the beginning of my project, and when I click a button in another scene it starts playing the voiceover from that clip. I don't have the button linked to that clip.
View 2 Replies
I've assigned a sound to the button over frame and a different one to the button down frame. When i over over the button the button over sound plays. When I then click the button, the button over sound plays AND the the sound I put in the button down frame plays.
View 8 RepliesIn my flash game, every time you click a button, it plays a short sound. Almost all of the buttons work - Except for a few random handful. Those couple play the sound twice. I don't know why either - I double checked everything.None of the frames have sound. The buttons that play twice are only set to play once. I didn't do anything different between the ones that worked and the ones that don't work.
View 2 Replies[Code].....
Ok- so the idea is that when you click a button it plays the movies assigned to the variables gallery & button to the frames mentioned. Then the variables are changed and then when another buttons is clicked it does the same - 'except it doesn't - it does it once then sits there I have to use variables because there's a lot more buttons..but i don't understand why it doesn't work - it seems such a simple and obvious thing to try and do - why is it so HARD???
All my sounds work however, the play button only seems to play my sound when I click on the pause or stop button first! Plus, my stop button acts like a pause button, it doesn't start the song from the beginning once it stops. [code]...
View 3 RepliesSo I got a toggle button that plays sound when clicked, now I need it to stop playing sound when clicked again.
[Code]...
I want to make it so that when I click on a certain button, it plays a new music clip. I am trying to do it by selecting the button I want, then going into behaviors, then +, then Sound, Play Sound... It then asks for the instance of the audio file that I want to play... but I don't know what it is.
View 6 RepliesI have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20
Click on button 2 > plays frames 10 - 15 > Goes to frame 30
Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
How do I make this work?
I downloaded a flash template and have modified it to suit our company but there is something that I can't do. When the file loads in the browser, music immediately plays and loops until you click a button to stop the music. On our video page, we have video
that we need to play that has sound in it. How do I get the background music to stop when my video plays without having to go up and stop the music manually. The videos are loaded via an external XML document and there are no buttons in the FLA file to link code to. the website is [URL]
I am using the following code, in the last line when I play the sound I can still hear it even when I have transformed it to 0.
[Code]...
I want to play a sound on click of a button. I can do this in AS 2.0
//Action Script 2.0
Code:
snd=new Sound();
snd.attachSound("try");
snd.start();
[Code].....
i want to gotoAndPlay more than one sound Ex: when i click the button i want to play frame label m2 and frame labe m1 sound
playy.addEventListener(MouseEvent.CLICK ,pl);
function pl(event:MouseEvent):void
{
so.gotoAndPlay("m2");
so.gotoAndPlay("m1");
}
the sound play in the same time i want to finsh play frame label m2 then stop then play frame labe m1 and stop.
I found this code to play sound:
myButton_btn.addEventListener(MouseEvent.CLICK, buttonIsClicked); [code]....
I got it working fine, but was wondering how to program a function for another button to stop stop playing that sound?I tried a function with snd.stop(); but that seems to be incorrect.
I have a flash animation with three different icons which play individual audios.
In one of the movies called 'bird' that I want to stop, I have in the first frame following code.
Code:
x = new Sound();
x.loadSound("mp3/cocky.mp3", true);
which works fine.
This movie 'bird' is then inside another movie called 'container' , any everything then sits in one scene.
In the movie 'container' I have three buttons which play individual sounds using same 'x.loadSound("...' method.
You first see and hear the animation of the 'bird' and it's sound playing straight away. After a 30 sec sound and the animation stops.
All working so far fine up to this point... But What I need is , when the user clicks on one of the other buttons to play the sound WHILE the 'bird' is still playing, I want to stop the 'bird ' animation.
At the moment it stops the sound of the 'bird' but NOT the 'bird' animation. Naturally If I wait 30 sec 'bird' animation stops and no problems there after. Only if and when user clicks before the 'bird ' animation is the problem.
I seem to be getting this error message when I click on any of my button which are controlling the sound in my animations.
ArgumentError: Error #2068: Invalid sound. at flash.media::Sound/play() at Conventional1_fla::MainTimeline/pSound()
My sound is working and all the buttons are working as wel but this error message keeps popping up in the out frame.
stop()
import flash.events.MouseEvent;
import flash.display.Sprite;
import flash.media.SoundChannel;
var loadSnd: URLRequest = new URLRequest("");
var Snd:Sound = new Sound();
[Code] .....
I have been trying to deal with sound attachment. Attached is the source file that i am dealing with(I deleted the sound files because the size is too big): Simply, i have to click on the objects first before clicking on the play button. Each objects i clicked represents a different sound and will be stored in the array. So i will be clicking the objects in sequence and when i click on the play button, the music will play. Now comes the problem with my coding, I was unable to let my music coming out one by one at the time in sequence.
View 10 RepliesI have a Flash 8 site that plays a music clip throughout the site. I have a flv video on one of my site's pages and would like to know if there is a way to stop the site's music when the user clicks on the "Play" button of the video and to have the site music start again when the video either ends or the user clicks on stop.
View 1 RepliesWe have 4 buttons, each calls a different swf. Cannot get one swf to unload audio when another is called.Have tried many scripts but none work. Still hear audio of previous swf on top of newly-loaded swf. This was never a problem in AS2 but too late to go back to AS2, must resolve in AS3.I read that this is a bug but everything I have tried does not work. Have been using UILoader to get position accurate x=150, y=40.
For loading have tried List, UILoader, addChild, etc. Don't know which is best to use so it can be unloaded.
sound it only works when placed on timeline. Im pasting the as where im using so that anyone can maybe see a solution. One thing to note, my swf is being loaded by another swf, ok...?
[Code]...
I�v build a simple flash projector to offer to my local fire department Essentially they used to in internal audio alarms to warn firefighters when there is an accident, fire, aggression, etcIn the version 1.0 they click several buttons, one to play the alarm sound, otherto announce the vehicle or vehicles that goes out, and a last one that says what is occurring.
The problem they report is that the sounds play immediately when you click in each of the buttons, and even the sound overlaps the other, which makes they click on each button and have to wait for the sound to finish and then click next. All this is normal because I associated the sounds to the buttons. What do I need to do the flash in this order in the version 2 of my projector:
1 The Fireman choose the type of alarm you want to play and click the button corresponding (but do not want the sound to play now) let's imagine that he pressed the button "alarm 1"
2 The Fireman choose (s) vehicles which are going out to the occurrence (but do not want the sound to play now) let's imagine that pressed the button "ABSC01"
3 The Fireman choose the type of occurrence (but do not want the sound to play now) we will imagine that pressed the button "fire"
4 finally the fireman holding down the "PLAY" (the green on on the top of the image) and this Makes the sounds selected to start playing in sequence, liker "Alarm 1" then "ABSC01 "and then" Fire "
Logically speaking I believe that each button must declare a variable associated with every unique sound, and then pressing the button takes the variables and plays them in sequence and without overlapping sounds.
i was looking into if there is anyway to work with sounds using actionscript?Basically im looking for something that
* Plays a sound in the library on loop
* stops that sound
* mute that sound (so it's still playing but cant be heard)
* unmutes that sound
the idea is so i can spread out this in scripts instead of in the frames.
I'm having trouble with sound in Flash. I may have went about coding the wrong way, because most of my codes are on frames.
So, I have these two variables
var outsideDay:Sound = new daysong();
var outsideNight:Sound = new nightsong();
And I want to play these songs on a specific frame. However, the sounds play sporadically, like 50 times at once. I think it's because I have other codes that link to the frames with a Enter_Frame function. How can I get the sounds to loop and not play multiple times at once?
I'm newbie in flash. I have created a button - it looks perfect. I got seperate keyframes for UP, OVER, DOWN and HIT events. The OVER (and only it) has assigned the sound. The problem is flash plays sound (assigned to OVER) for DOWN event (no sound assigned). I have no idea what is wrong, tried everything with this. I am unable to find soultion,
View 2 RepliesI'm developing a web app with PHP and I need to test if a page of a website has background music. As many of you already know, this is the list of the tag (I miss someone?) where the background sound can be inserted in a webpage:[code]While checking if there's background audio because of the presence of the tag bgsound or audio is easy to do, testing if a flash animation has the sound is not so easy (at least for me).I know that I can check if a tag embed has in the src attribute something like sound.mp3 but how can I test if the sound is totally embedded in the flash animation?I searched a lot to find an answer but unfortunately I've not found one.
View 1 RepliesI posted a previous thread on this but i have found the problem but cant fix it!!
i have balls that can be thrown around the screen and when they touch i want them to play a specific sound to those balls.[code]...
the sound is place inside a movieclip timeline on the first frame. its about 600 frames long the sound. the main timeline were the movieclip is situated is only 1 frame long. The main timeline is 50 frames long.I thought if the movieclip was not on the frame the sound wouldnt play.
i have an issue with the sound in the game.ive place a soundtrack on the first frame. its a long sound track. over 600 frames long. I place the sound inside a movieclip due to a large size. My issue i have is it sound plays even on the frames the movieclip is not situated on.when i return to the frame. the sound starts to overlap and play twice which is a bit of a mess and a racket.
Im new in flash, and i have a problem in my mp3 player. im using flash cs3. When i click the link to play the song, it plays the song. but when i click another song, it plays the first song. by the way its an XML driven. here's the codes that i've tried
[Code]...
The flow player will play the audio of a *.flv, but doesn't play the video and I've no idea why. The initial example page using the default flowplayer flv url works fine. When I change the url to my godaddy site, it doesn't work. I'm using Movavi Video Suite 8 to perform the conversion to flash from mp4. I think the metadata is included in the flash file when it converts, but I'm not certain. I used the meta data injector found here: [URL] to inject meta data into the flash files and it still did not work.
Also of note is that the player's progress bar shows the start, current, & end time values of the video, so I think the metadata is there. I've still no clue why this isn't working, though.
I wonder if it's my *.flv file as the player will load the mp4 file it was generated from. I used a premium application called MOVAVI Video Suite to perform the conversion. I don't think this is the case because I can upload the converted *.flv file to youtube and it plays fine.
Also worth noting is that the Flow Player plays audio and not video both when the flv source is pointed to my godaddy site as well as when its pointed to a local folder on my hard drive that contains the player, it's files, the video files, and the example .html page being used to test this.
Possibly something else worth mentioning is that I have not put the flow player files on my godaddy site yet because the video picture isn't showing locally.I have the same issue with the LongTailVideo player.
Here is the html for my test page:
<!--
include flowplayer JavaScript file that does
Flash embedding and provides the Flowplayer API.
-->
<script type="text/javascript" src="flowplayer-3.1.4.min.js"></script>
[code].....
I am using Flash MX 2004.
Layer 1 - A simple movie clip symbol moves from Frame 1 to Frame 30 Layer 2 - I apply an actionscript stop(); on Frame 1 so that the movie stop at the beginning
I wish the movie clip symbol play when I click on it. How can I do that?
P.S. I tried to use the following AS on the movie clip but it fail.
on (release) {
play();
}
i'm habing abit of problem with this code, its supposed to play pause and stop, the problem being that when i press stop then play it only plays from the last pause and not the beggining how to get it to play from the start after the stop button is pressed
[Code]...
