When I am loading external UTF-8 text files (or texts from an mySQL DB) with Flash, if those files contains enters (by the user that create them) I noticed that those enters are replaced by two char codes: 10 and 13 (new line feed + carriage return). If I put the loaded string to a TextField.htmlText I get 2 enters pressed, and thus instead of having 1 line change I got 1 paragraph change.
[Code].....
In AS2 you had the functions ord() and chr() which specifically converted ASCII codes to their string equivalents.
However in AS3, String.charCodeAt() and String.fromCharCode() work with Unicode values.
Is there any way to convert a string character to its ASCII equivalent and back?
how I could remove anything after a prefix in this string... [URL] so need to end up with [URL] The query string may change so need a way of telling it to remove anything after .flv
View 5 RepliesLets say that I have the following strings:
ActionScript Code:
var string1:String="Jeep Wrangler - Red";
var string1:String="Jeep Liberty - Green";
var string1:String="Jeep Patriot - Yellow";
var string1:String="Jeep Compass - Black";
For each string, I want to create a function that removes the text to the right of the "-" character so the strings return as:
ActionScript Code:
var string1:String="Jeep Wrangler ";
var string1:String="Jeep Liberty ";[code].....
I have a time format like so: 00:00:00.00 (hours, minutes, seconds, millieseconds). This is stored into a string called adminTime.
But I need to make it so that the string takes what ever the time is and changes it to 00:00 (hours and minutes)
So basically a way of looping though the string and removing the seonds and milleseconds.
I have a string like this
Code:
<place xpos=74 ypos=86>,<place xpos=135 ypos=159>,<place xpos=236 ypos=214>,<place xpos=264 ypos=137>
and I want to make it like this
Code:
<place xpos=74 ypos=86><place xpos=135 ypos=159><place xpos=236 ypos=214><place xpos=264 ypos=137>
I want to remove spaces from the end of a string.
apple = "A P P L E ";
to
apple = "A P P L E";
I have made this converter and it stops working when the user presses enter, as the new line corrupts the data. So i thought, i'll just remove the new lines every time the user presses enter. But apparently i can't access the '' character using string search functions or regular expressions.I try to execute the code in the Change event of input_TF.text
ActionScript Code:
trace(input_TF.indexOf("
"))//always -1
[code].....
there an easy way of removing all instances of a string from an array?Say i had, [0] forward, [1] forward, [2] right, [3] crash, [4] crash, [5] crash(this structure will change)How would i remove all "crash" instances? the splice method just doesn't cut it =/
View 8 RepliesI need some code for ActionScript 3.0 which will remove any characters which are not valid in an XML attribute.
Have spent some time searching google and not found what I'm after.
I'm creating a fill-in-the-blank quiz in AS 2.0 and would like to make the comparison between the correct and submitted answer a little less harsh during the comparison. The quiz actually consists of memorizing a sentence or two from say a poem and I'd like to not include any errors of punctuation due to a misplaced or missed comma, exclamation pt or period. as long as the spelling is good then the user should get the correct answer. Below is a little snippet:
[Code]...
Let say, I am loading xml file. And I have done addEventListener for Event.Complet. while xml is loaded, After completion of complete event, I declare I passed value to my attribute but it does not show in.
E.g.:
....this is a class main
var keyword:KeyWord = new KeyWord();
I'm new to AS3 and I need some help putting something with the FLVPlayBack component together.
When I put this in the first frame of my timeline:
player.volume = 0; player._uiMgr._isMuted = true;
[Code]...
We are trying to build a game in flash with AS3 (Im no pro with this)I've got 7 Movieclips and 7 Buttons.none of the 7 Movieclips should be on stage, they only appear when you've clicked 3 of the 7 buttons. once these 3 are clicked 1 of the 7 Movieclips should appear.Now I've got the code to make 3 selections and make it show 1 movieclip.and I've gotten the code to make a random movieclip appear.My question: How do I combine these two to make them do what's supposed to for the game.[code]
View 1 Repliesdoes anyone know how to play a sound when a mouse is over an object (image, text, button)?
View 4 RepliesI have to connect my flash application with php+mysql .how can i integrate my php code into flash..?
View 1 RepliesI'm making a Flash piece consisting of a few different pages and clicks to take you to different chapters. The company I'm making it for have sent me URL's of pages that will track the person on it - what page they're on, what chapters they view etc.
So, where do I put these url's?If I put them in a getURL won't that just redirect the person away from the page with the SWF in it?
i will like to add a loop to this codes below
var myTimer: Timer = new Timer(1000);
myTimer.start();
myTimer.addEventListener(TimerEvent.TIMER, nextPic)
[code]...
Can I really do that with the phone? Perhaps I would have to call any of the native API's, but I am not really sure whether and what is possible. I am pretty sure that the camera is accessible, so at the worst case I could send the picture to the server, decode the QR code on the server, and get the results on the phone, right ?
View 1 RepliesI use flash MX 2004, and I've been facing a problem. I made this flash program to load a jpeg, and to resize and display it.. But the problem is, it works, but not in a stream I mean My program work in 4 phases::
1. Load the jpeg
2. Check and compare the image's height and width with the given parameters
3. resize the image... 3.1.. First height... 3.2.. Then width
4. Display the resized image
The problem I am having is, it does phase 1, then does nothing... I experimented with it a bit, and then i found... Let it do the phase 1, then goto another frame, then back to previous frame... It does step 2.. Do same thing again for other phases... Its sort of like I am refreshing my frame again and again to make my code work in bits and pieces.
ave some lines of code that i would like to shorten.
View 5 RepliesI am working on a Flex project that is interfacing with physical hardware.Using the AS3 command of socket.send I can set a particular feature on the physical hardware.The problem I am having is I need access to send from the Extended ASCII codes.[code]This would be translated to me sending two numbers to the hardware.7F and 07. The Dec equivalent of these Hex codes are 127 and 7.The hardware takes these two numbers and calculates a length along with a third integer.[code]
Unfortunately the Hex 88 is in the extended ASCII table.The highest the regular goes up to is 7f which is a Dex of 127.I need the ability to send full 0 to 255 numbers in ASCII form.I can't send from 128-255 without using the codes from the ASCII extended table.I get an error every time I try to send something form the extended ASCII table back from the hardware.Can anyone confirm that AS3 does not support the Extended ASCII codes?
I have some basic as3 knowledge and I have built 2 apps. in as3 but I want to use them for mobile systems as I guess for symbians.Which program should I use. I searched here flash lite but there is no forum about it. Ä°s there any other forum to help me learn flash mobile appliÅŸcations
View 2 RepliesI am brand new to Flash and I am completely unsure on how to diagnose and resolve the problems I am having.I am in an online program through the Art Institute and I am currently taking a course to learn the basics of Flash.I am running Flash from CS4 on my MacBook Pro running OS X 10.6.8 and I am having problems opening some of the .fla files that people post. One of two things happens, either:
(1) when I try to open the .fla file I get an pop-up alert (below) and if I click OK the file doesn't open (and clicking OK is my only option, as you see);
(2) I go to open the .fla file and it appears to be opening but then the screen is blank and I get two error reports in the Output pane which says:"VerifyError: Error #1053: Illegal override of isRelatedObjectInaccessible in .RemappedMouseEvent.ReferenceError: Error #1065: Variable_ e9a7 52f233536079fc4486d6ac92a1b05a633a5657d5b83ad7fac2246298 b191_flash_ display_ Sprite is not defined."I tried installing all available updates for Flash and that did not solve it. I also tried opening the same .fla files on my husbands MacBook Pro OS X 10.6.8 running CS4 and got the same problems.
can i recognise a movement on a joystick with ascii codes???
View 1 RepliesI'm trying to allow ascii codes to be entered into a textField, using num codes (ALT+Num), and am seeing some very strange behaviour. If I enter: Alt + 14, I get a charCode of 9835, and ♫ is displayed in my trace output, but a placeholder square is entered in the textField. If I enter: Alt + 0014, I get a charCode of 14, placeholder square is displayed in trace, and ♫ is displayed properly in the text field.
View 3 RepliesI used AS in mc 1 works perfect but same code don't works inside mc 2 what is my mistake?Please take a look at these movie clips!
View 9 RepliesI made a huge swf video game that involved buttons with [code]I put a data grid on the stage on one frame.It never even enters on stage and this still happens.Make a button and plop a data grid down. publish, delete, publish again.I've done some research and found that I am not the first person this has happened to. My file is basically destroyed and I'm on deadline.
View 4 RepliesI made a simple game and a simple scoring system. Player writes his/her name first then plays the game and gets the score. Score and name are variables and writes on the screen at the end of the game.The problem is ; i have to keep names and scores for every player who plays the game. I can save it with php or mysql but i have to do it offline ! The game will be played on computers without internet connection.I googled about my problem and get some answers about sharedObjects but all the samples i've found are so complex.
1. Is there any possible way to run php codes embedding in flash application ? ( maybe in a third party software ? ) or is there any "simple" way to save scores and names ?
2. I'm sending my php codes i'm using to write and read in flash. Is there a actionscript version of these codes ?
3. I'm using DataGrid for displaying scores and a php file as data source. Is there a way to use a txt file for data source ??
The thing is that once uploaded in DART, my ad is not transparent so we always see the white screen where the ad expands.I know this problem is normally solved with wmode=transparent but the thing is that the person can't have an html code to put the wmode code.I wonder how I can set my flash banner to be transparent without html codes..Using Flash CS4 with ACS2! Here's the fla file : http:[url]......
View 2 Replies