ActionScript 3.0 :: Tween Class - Dynamic Instance Name?
Oct 12, 2009
I have been search for a few days for literature on dynamic instance name in referring to movieClips already on the stage. Each movieClip was set and displayed using the addChild(); and have a set instance name for reference ex. my_mc_x (x = number 1 - 10) I wanted to access these clips whit a tween
var image_assoc:String = ("my_mc_" + num);
trace("Instance Name: " + image_assoc);
I have tried the following
fadeTween = new Tween(this[image_assoc],"alpha",None.easeNone,0,1,1,true);
fadeTween = new Tween(this[image_assoc].name,"alpha",None.easeNone,0,1,1,true);
fadeTween = new Tween(getChildByName(image_assoc),"alpha",None.eas eNone,0,1,1,true);
dynamic reference to objects on the stage from a string that creates the object name to effect the instance of that object.
View 6 Replies
Similar Posts:
Oct 14, 2009
i have a simple ClassB which just draws a rect:[code]And in my other ClassA i am trying to instantiate ClassB by its name - string "ClassB" with following code but that doesn't work:[code]I keep getting following error so i must be missing something?[code]
View 6 Replies
Aug 27, 2006
Been trying to apply Tween Class to a dynamic TextField (create by MovieClip.createTextField() function), but there is no luck, even though I put the dynamic textfield in an empty movieclip (MovieClip.createEmptyMovieClip() )and tween that movieclip doesn't work.
View 1 Replies
Aug 4, 2010
Is it possible to make an instance of a class dynamic at run time? So I can add properties to it?
View 3 Replies
Nov 25, 2010
Is it possible to create a class instance dynamically and specifiy the constructor parameters dynamically?
So for example, imagine I have a class 'TestClass' which as constructor takes two parameters, (Array, int)[code]...
View 2 Replies
Jan 22, 2010
I have a base class which is being created via remote_object [RemoteClass alias] from the server.I have other specialized classes that are derived from this baseclass, but serialization with the server always happens with the base class.The base class has meta data that defines what the derived class is, for example
[RemoteClass (alias="com.myco...')]
public Class Base
{
[code]....
View 2 Replies
Sep 15, 2011
I'm using a library that has a function that returns an instance of some class Engine.
I'd like to tack on some interfaces to Engine, so I subclass it class InterfacedEngine extends Engine implements AwesomeInterface. but when I change the code that uses the classes from this:
var engine:Engine = generateEngine();
to this: var interfacedEngine:InterfacedEngine = generateEngine();
It gives me a runtime error (elision mine):
TypeError: Error #1034: Type Coercion failed: cannot convert ...::Engine@1bc2bf11 to ....InterfacedEngine.
What about AS3 classes am I misunderstanding?
View 2 Replies
Oct 14, 2009
I have to admit I pretty much ran away from Flash when AS2 came along and only used it for animation purposes over the last 5 years.So I'm having a major crash course in AS3 in Flash CS3 and I'm not enjoying it one bit. I'm getting maybe 10mins of finished work per hour as I try to figure out the limits and rules of AS3. Quite often it seems that AS3 simply can't do what I want it to. Anyway: Characterchecks.as is the main class and it loads a bunch of XML into four arrays. The file starts like this:[code]If I trace the value of, say, cc._Categories from the main FLA, it's empty. I'm guessing that the next line of AS in the main FLA doesn't wait for the previously called function to complete? (This may tie in to my next problem)My next step is that I want to display various things based on the data in the array. I have another class, Display.as which will hold all the functions to create the items on display. I thought it would be best for these to be a separate object. I wonder if I'm right?
So I declare an instance of Characterchecks in the main FLA and call it cc, and then run the functions to populate the arrays... Now I create an instance of Display and call it cd. How can I get functions in cd to see the values of the variables in cc? And if the main timeline can't tell that the functions aren't finished filling the arrays, how is cd supposed to know?I might be asking dumb questions, or maybe I'm doing things ***-backwards, I don't know. I'd appreciate any help, I really would. This whole thing has me at the end of my tether... being the most technically advanced person in my circle of co-workers and web design friends means I have no-one to explain why things need to be done a certain way or what the best way is.
View 3 Replies
Apr 14, 2011
I'm creating a little game - The player controls a character that follows the mouse. Pigs run away from the player, and the player has to get them all into a pen. To make the game a little more difficult I'm trying to add an enemy - wolves, that attempt to perform a 'hunt' method every x seconds. This method sends a reference of the wolf instance to Main (my document class) and Main then loops through the pigs on stage to see if there's any nearby. Now as far as I know this works - my problem is I'm unsure how to send the pig instance reference back to the wolf that called the hunt method, so it can then 'target' the pig, and then attempt to pounce on it.
This is my Wolf class:
Code:
package
{
import flash.display.MovieClip;
import flash.events.Event;
[Code].....
View 7 Replies
Dec 10, 2010
Quick question. I have been Googling this all morning, but it's either not there, or else written in a way that doesn't register. I am inclined to believe the latter, as this seems like it should be something completely trivial to me. I made a small Flash file using AS 3.0, and this is the first time I've really been able to stick to the OOP way of doing things and not hack together a mix of stuff from the timeline to get around not having everything work in the classes.
So I'd like to keep it that way, but one thing is eluding me: I can't call a method of an instance of another class (than the one I'm calling from) without resorting to "DocumentClass(root).instanceName.method." Intuition tells me there has to be a better way of doing this (like, without having to reference the document class every time I call another class instance's function; and CERTAINLY without having to use the word "root" - that just seems so Flash 5 to me. Does anybody have a better way of doing this that they can share?
[Code]....
View 1 Replies
Jun 21, 2006
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 Replies
Mar 4, 2010
If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
View 1 Replies
Oct 2, 2010
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
View 1 Replies
Oct 27, 2009
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
View 2 Replies
Jan 26, 2009
I have a general / somewhat newbie question. Is it better practice to call a function from another class like so:
[Code]...
Does one way free up more memory or enhance performance?
View 5 Replies
Dec 19, 2011
I have an xml snippet that contains an object hierarchy:
doc = """
<RootObj val1="ValueOne" stat1="Stat1" stat2="Stat2">
<internalarray type="array">
<InternalObject val1="12" val2="12" />
<InternalObject val1="13" val2="13" />
[Code]...
View 1 Replies
Oct 25, 2010
Is there any way to make a movie clip start at a given x and y point, and ends at another x and y point, in 90 seconds?m not getting a good result.The main problem is, I want the movie clip to travel along a straight line. And by this code below the "b" movie clips makes some curves.Heres what Ive done.
"p" is point movie clip
"b" is ball movie clip
fullTime = 90000;_currentTime = fullTime;oldTime = undefined;onEnterFrame = function () {if
[code]........
View 16 Replies
Oct 26, 2010
If you try to make a movie clip travel along a rectangle diagonal within 90 seconds, the movie clip makes some curves.
View 5 Replies
May 13, 2006
What I want to do is tween a number from lets say 0 to 50 using the Tween class. The below is an example of my tween but it wasn't working (*NOTE* i'm using TweenExtended but if you change the tween to Tween only it will be the same thing, i just have a habit of using the TweenExtended class):
[Code]...
View 3 Replies
Feb 3, 2009
iv got these buttons animated using the inbuilt tween function and am coding them like this:
function navOver(e:MouseEvent):void {
var page = MovieClip(e.currentTarget).buttonThumb;
var myTween16:Tween = new Tween(page, "y", Regular.easeOut,
0, -25, 0.35, true);
[code]....
MovieClip(e.currentTarget).instanceName returns undefined neather of which are the instance name.i cant hardcode the function because its used on lots of different mcs throughtout the flash file
View 4 Replies
Aug 2, 2010
I'm trying to make this game and in trying to make it look more realistic, I'm trying to get the balloon to curve upwards before coming down and hitting the target. Is that even possible? Also, the target are dynamically created with random x and y points, so is it possible to make the end points the x and y point of that target?
View 1 Replies
Jul 14, 2005
I use a .png sequence for a sprite (primarily because it has the alpha channel) I will use in flash... its a walking animation of several frames. I make an empty symbol, load the frames into it. I put the symbol in the canvas. It animates fine and the alpha channel is working. Now I try to make a motion tween of the symbol instance, so as to simulate the walking movement, from one point to another. I playback [ENTER] its working fine, just as I want it.
Now if I do the [ctrl+ENTER] preview or export, the motion tween is working, the sprite is moving from point a to point b BUT the walk animation is NOT WORKING. Its just showing the first frame in the image sequence! Am I missing out something to make the image sequence animation work like it should? I tried to do the exact same thing to a movie clip (MOV) it works... but with the png image sequence I am really puzzled.
View 3 Replies
Feb 17, 2011
Is there a way to generate an instance of a class that implements an interface based on the name of the class?
I am trying:
var ClassReference:Object = getDefinitionByName("movement.OuterSpaceMovement") as IMovement;
var m:IMovement = new ClassReference as IMovement;
trace("startup..." + m);
-But I am getting an error message ReferenceError: Error #1065 (OuterSpaceMovement) not defined.
I have several classes that implement the same interface (IMovement) but I need to be able to generate new instances of these classes and then pass these instances as a datatype (IMovement datatype) to other classes...
So then I tried:
var ClassReference:Class = getDefinitionByName("OuterSpaceMovement") as Class;
var m:IMovement = new ClassReference() as IMovement;
and this doesn't seem to work...but the following
var m:IMovement = new OuterSpaceMovement();
View 1 Replies
Jul 22, 2009
I'm trying to create a new instance of a MovieClip when the original one has been used. Would sound easy enough. Just use: var
instanceName:ClassName = new ClassName();
the class name/mc in the library im trying to duplicate is MCg1 so
var instanceName:MCg1 = new MCg1(); right?
However, the particular object in the library i'm trying to duplicate has a base class that is an external class file (just to control it's drag drop functionality)... i.e baseclass is not set to the standard flash.display.MovieClip, or whatever the case maybe. So i end out with a: TypeError: Error #1009: Cannot access a property or method of a null object reference.
View 6 Replies
May 11, 2006
I've done a class to be able to listen to the event for a CLASS not on an instance.
Code:
class net.webbymx.events.XClassEventListener {[code]....
why did I do this.It cames with my rugby game.I have player in two teams. When a player throw the ball I want the other teammate to act like "wait for ball" and the opponent like "seek for ball". Plus I'm lazy (and I don't want to register the listener for each instance of the player I'm creating). So this class is made to be able to handle as many instance of a class I want without adding a listener on each of them. I'm just creating a global listener on the class and then I will be able to receive dispatched event for any instance of this class .so in my team I can do
Code:
XClassListener.initialize(this);
this.addEventListener("throw", "net.webbymx.game.Player", "wait");
and in my opponent team I can do
Code:
XClassListener.initialize(this);
this.addEventListener("throw", "net.webbymx.game.Player", "seek");
View 4 Replies
Dec 23, 2006
Let's say i have a bunch of balls/cells. I'm having trouble figuring out how to make it so that every other ball bounces off of every other ball.
so in short, it's really one instance being able to check all other instances of the same ball class?
View 7 Replies
Aug 31, 2011
When I declare a class variable
private var myVar:MyClass = new MyClass();
It creates a new instance of that class that will trace as [Object MyClass].
However, as soon as I assign it to something
myVar = thisOtherVar;
It will now trace as [Object thisOtherVar].
I need to get it back to where it's just an "empty" blank class instance, if that makes any sense at all.
View 14 Replies
Jun 22, 2010
Ok, Background. I have two objects both of which im spawining in though code. We will call them bullets and wolves. They have their own .AS files which tells them everything they need to know about themselves. I figured i would do most of the hit testing on the bullet.AS file, hit testing against the wolves as there were going to be a set number of wolves but not a set number of bullets.o, I named them by running a loop and putting the linenewWolf.name = i.toString();Yes, new wolf is a declared variable, and i is the name of the variable that makes the loop run. I also have a test in it, and it works fine.
However, The hit testing is where i come into an issue. Remember, its on a seperate .AS file. The wolf maker and namer is on the main flash page.The hit testing function isif(this.hitTestObject(a)){i changed up my variable name to run a second loop. first variable name is "i" and the second variable name is "a"And for some reason i get a type error 1034, which from what i understand is an error that you get when two instance names are the same. Also, If possible, i would like to add letters to the name of the object, but im not sure if flash will let me as i belive the code would look something like this
View 1 Replies
Jan 25, 2010
in my project i call the "animateLeft" function like 50 times, it makes a lot of tweens, but now it create new tweens every time the function is called, witch is not memory effective? Are there a way to declar the tween once, "var cTween0:GTween = new GTween();" and then just edit the tween insted of creating a new one?
[Code]...
View 1 Replies
Jun 28, 2010
Given that both of these calls to getQualifiedClassName return the same thing (mx:Label), how would one go about programatically differentiating between an instance of a class and a reference to the class...
var lab1:Label=new Label();
var lab2:Class=Label;
var qcn1:String=getQualifiedClassName(lab1);
var qcn2:String=getQualifiedClassName(lab2);
In other words, how could I know that lab1 is of type Label, while lab2 is type "Class". typeof() simply returns "object" for both... getQualifiedClassName returns "mx.controls::Label" for both...
View 3 Replies
