I have a problem with a flashsite I'm working on. It freezes when I click on the page with the most content on it. I use the "alpha" transition.
Here's the code:
import fl.transitions.*;
import fl.transitions.easing.*;
var p1age1 = new page1;
var p2age2 = new page2;
var p3age3 = new page3;
[Code] .....
I'm using tweenlite to create a flicker affect on roll over, however when i rollover really fast the instance freezes half way through the transition and the button eventually goes to white. The code im using is as follows:
[Code]...
I'm not having trouble doing the transition. However, I'm not doing it the way its described in the tutorial on the main site. I dont have a frame to tween to as an intro, or a frame to tween to as an "extro" when another SWF is loaded. I am having a SWF tell level0_ the dimensions of some MC right before a different MC is loaded, then level0_ tells the new loaded MC (inside the new SWF) to Tween from the dimensions it just recieved (old SWF) to the dimensions of the new loaded MC. It works great.. its completely dynamic.
The problem is that the MC flashes when the next SWF is loaded, which is obviously it resizing to the old SWF's dimensions, so it can Tween to the new dimensions. Theres got to be a way around this! I've seen dozens of sites tween perfectly, do they use the intro/extro method, or is their entire site in one SWF? or is this possible the way I want it?
heres a gander at the code:
old SWF Dimensions sent to _level0 before unloading:
Code:
_level0.tempWidth = _level5.contentBox_MC._width;
_level0.tempHeight = _level5.contentBox_MC._height;
_level0.tempX = _level5.contentBox_MC._x;
[Code].....
In reference to the question below I used this tutorial to accomplish some of my AS goals: http:[url]....The question based off of this tutorial is how to correctly target an external movie clip with buttons that are not on the main time line. What would be the approproiate path for the script below for the external swf (work.swf)?
on (release) { if (_root.currMovie == undefined) { _root.currMovie = "work"; container.loadMovie("work.swf"); } else if (_root.currMovie != "work") { if (container._currentframe >= container.midframe) { _root.currMovie = "work"; container.play(); } } }
right direction but theres still something I'm missing.At this point, I am able to load the initial swf into a container MC and store that info into acurMovie variable. When another button is pressed, curMovi checks if it equals event.target.name, if it doesn't equal "curMovie", it plays the existing movies outro What I thought I could do was create a conditional statement checking if the outro has reached the total frames, and if so, load the next swf. This isnī workingThis is what I have so far:
Code:
import flash.display.MovieClip;
//Load initial file
[code]......
Im trying to update the Transitions between External SWFs tutorial for AS 3 (link below). [URL] I looked at a few tutorials that would help steer me in the right direction but there's still something I'm missing. At this point, I am able to load the initial swf into a container MC and store that info into a curMovie variable. When another button is pressed, curMovie checks if it equals event.target.name, if it doesn't equal "curMovie", it plays the existing movies outro. What I thought I could do was create a conditional statement checking if the outro has reached the total frames, and if so, load the next swf.
[Code]...
[URL]
how to do the transition between scenes? instead of external swfs?
I have 2 different swfs (movie1.swf and movie2.swf) in a HTML.... When the movie2.swf finish playing (at the end there is a stop() )...... I would like to push a button replay to the movie.swf and play the movie2.swf from the beginning.....
View 1 RepliesI am am loading external SWF files into main file from XML created menu.I want to make TRANSITIONS between loaded files, but this Kiripa tutorial does not work for me since I can not give each button sepparate code. All buttons come from xml.
At the moment If I do all by tutorial all menu buttons start to load same link which and transition works, but yeah I need menu to understand that it must load new swf not that same.I know it is possible, but I do not know how it is made, so if anyone could help me I would be very happy!
Now comes code that needs to be modified :
if (_root.currMovie == undefined) {
_root.currMovie = _root.link[this.i].attributes.url;
_root.Konteiner.loadMovie(link[this.i].attributes.url, "_blank");
} else if (_root.currMovie != link[this.i].attributes.url, "_blank" ) {
[code]....
ok so im trying to create a sort of SMOOTH transition between swfs.
the problem im having is, targeting a specific label when i need it.
what i mean is, i can target it fine by tpecasting my external as a MC, but...it doesnt give me the desired effect.
for example, i want it so that when a button is pressed, go and play the "outro" frame inside the external swf, at the end of that same external swf, theres an " end" label, when that label is reached. something happens etc.
my problem is that when i hit the button, at the time of that event firing, the "end" is null or rather undefined because it hasnt reached there yet and i get an error or if i do a if/else statement, then i get the else part firing off since again, "end" isnt reached yet when the button is pressed.
i dont know how to make it fire when the "end" label is reached.
i tried while loops but...no good lol. thing froze flash for a bit until it did fire, by then it was a mess lol.
heres my code:
Code:
stop();
var loader:Loader = new Loader();
var urlReq:URLRequest = new URLRequest("indexCoontentLoad.swf");
[Code].....
ive added a " here i get lost" comment to indicate the part im lost in/cant figure out how to write.
overall, what i hope to achieve is that when the "end" label is reached, something happens. else, just keep playing until it is reached.
I have a site in progress, but am running into a problem with the transition that plays while external images/swfs are loaded. Before, I inserted the conditional statement, if(transLoad==0),multiple mouse clicks would result in endless children being added---Let me try to explain, I have a series of buttons which load external swfs upon Click events..ex
Code:
link1.addEventListener(MouseEvent.CLICK, clickOne,false,0, true);
the function clickOne would call the transition function below:
[code]....
ANYONE KNOW HOW TO Preloader and Transition for Dynamic Files AND Transitions Between External SWFs MIX TOGHETER...
View 1 Repliescould someone with scripting a fadein/fadeout transition for external swfs between the button clicks or suggest another way to do it?
View 1 RepliesHow can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 RepliesI am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 RepliesI have a long timeline based animation, about 23 minutes in full. When I test or publish the movie, the SWF freezes with about one and a half minutes of playback time left. The streaming audio, however, continues to play.I know that the error isn't due to some sort of errant stop action at that point in the animation because I have it broken up into several scenes, and if I test the final scene by itself, it does not freeze and plays back correctly. Also, if I rearrange the scenes, the SWF still freezes about 21 minutes and 20 seconds into the animation, which, after rearranging, corresponds to a different point in the animation.
View 1 RepliesI have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 RepliesI am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
I have a flv which is in the same root folder as my exe. I have a navigation bar which takes me to the specific point in the timeline where the video is. Once the video comes up it plays for 1 second and then freezes. If I manually scrub the timeline past that point the video will continue and loop as intended, but right off the bat everytime the video freezes?
I'm at a complete stand still, Have tried reinstalling flash player, tried installing old versions of Flash player, nothing seems to fix it.
Is it possible to access local swfs using a remote swf
View 1 RepliesI finished my flash logo for work and am now having a problem when trying to publish/export/play the file. On frame 110 when the first shimmer crosses the "M" I get a hiccup on that frame, it should be a smooth transition. Once the video plays once the replay works fine, but this is going to be the intro to our website, one time view.
The playback was working great the day before. Today, after some more tweeks, not so good. Only thing I could fathom was maybe too many masks (added 1 more today, 3 in total) were being applied but I tried removing all masks and am still having the same problem.
Visit the link to view intro:Metagraphics Intro
I created a button bar with 6 buttons that display separate content. When I click on one of my buttons, it brings up the content alright, but on release creates an entire duplicate set of buttons on top of my existing set of buttons. I can click on another button, and it will display content okay, but add yet another set of buttons on top of itself. after 2 buttons it basically freezes. why are my buttons in essence copying itself, and how can i correct.
View 6 RepliesUsing AS3 on Flash CS5 Pro. I've got a parent.swf which passes info to/from a child.swf via the following code:
[Code]...
The connection works fine except that when IExplorer loads the parent.swf it tells the user that "To help protect your security, Internet Explorer has restricted this webpage from running scripts ..." The thing is that even if the user now clicks ok, the swf freezes. I've checked why this is and I found that what is happening is that IE runs the swf again and this triggers the error : "ArgumentError: Error #2082: Connect failed because the object is already connected. at flash.net::LocalConnection/connect()". This double connection attempt freezes the swf.
How should I capture this error and prevent this from happening? I'm a normal programmer and have never done any error capturing before. Also, there is one particular child.swf (there are several) which to me seems to be the same as all the others; I wrote the same code precisely as far as the connection is concerned. However, only on the Chrome browser, it does not load like the others and freezes the swf. Curiously, it works fine when I test it on my laptop/Chrome, but refuses to load when I try from a remote computer. Has anyone seen anything like this? Is it a browser/plugin error or something on my side?
I've got an animated banner for my site which I've grown quite attached to. It's a scene of the sky with the Title of my site on it and there are clouds that move constantly across it.Now the tricky part and part that I think might be freezing up the browser (firefox) is that the background changes depending on your computers time.So if you visit my site and the time is past 6:00PM, the day background will change to night.It's not an instant change though. You actually have to refresh to get it to change. Anyway, if I let the site/banner sit in my browser as either the active tab or the non-active tab for at least 10 minutes, the whole browser will freeze up. The only way to stop it from freezing up is to close it and restart it.I don't know what I did wrong, but I was hoping you guys could tell me. The file size is not that big (262kb). The images were converted from .jpg to vector, so I can't see why it'd be too graphic intensive. Basically I'd just like to be able to run it at the current resolution and quality, but not have it crash people's browsers.
View 3 RepliesWhen i open the site [url].. in any other browser except safari it seems to work fine. When opening in safari it is loading 5 thumbnails of 6 and just freezes. After 5 min of wait it shows the error[code]...
If I open the site again it works. But if the cache is clean( if i clean cache) it is not working the first time. Thus all users that open my site in Safari for the first time get stuck on the loading.
I have created a mp3 player to stream 15 mp3s, each is about 5Mb & about 5 minutes long.
I have also created a simple visual equalizer with SoundMixer.computeSpectrum(). It is only 128 simple lines dancing across the whole page.
It all looks fine, except after playing for about 2 tracks, the browser is frozen and need to be shut down.
I wonder if this is due to the download limit of the server or the SoundSpectrum, or some other issues?
I have a tween, and it keeps stopping before it complete. With some research, I found it was a scope issue, and that the solution was to put it into a package, like so:
ActionScript Code:
package globals{
import fl.transitions.Tween;
public class globals {
public static var tween:Tween;
}}
Then, I have this line:
ActionScript Code:
globals.globals.tween=new Tween(obj,prop,func,begin,finish,FPS,useSeconds);
The animation continues to freeze.