Iv created a virtual keyboard in flash using arrays and buttons i now want to assign a sound to all keys so that whenever they are pressed the sound will play, I'm guessing ill need to use a for loop or something but i really don't know how i would go around doing so.
View 2 Replies
I am trying to create a program where I assign movieclips in the library to a key. i.e, if I type in "cat", movieclips for "c", "a"and "t" would appear on the stage. Is there a way to do this?
View 7 RepliesI'm trying to make a sort of audio/visual keyboard (musical instrument) sort of thing on flash and I'm having a really hard time finding out how to (and actually managing to) get different movie clips to play depending on which key is pressed.
View 1 RepliesI have a multidimentional array already made, brought in from a CSV file via csvlib.I also have the headers in an array and I would like a way to assign this array as the keys for the arrays.here's a simplification. have a data array like so
data[0] -> [0] blue, [1] 1984, [2] wednesday
[1] -> [0] green, [1] 1926, [2] friday
and a simple array of keys/properties (header array) like so:
[0] colour, [1] year, [2] weekday
I'd like to insert the keys to make
data[0] -> [colour] blue, [year] 1984, [weekday] wednesday
[1] -> [colour] green, [year] 1926, [weekday] friday
i've read up into associative arrays a bit and am not getting how to do this. (there's 38 properties so remember which is which is going to be quite inconvenient).I sort of thought csvlib would do this automatically but it appears the headers just exist completely independently.
The thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
(Flash 5) Ok guys, I am trying to get a button to work by pressing keys. Problem 1) I want the keys that are pressed to be ,1,2,3,etc... and those keys aren't in Flash's actions, can they still work? Or do I have to use keys like SPACE, RETURN, etc...??? Problem 2) Here is the code I'm using. I also want a sound to be played while the button is going down. The sound is in the "down" of the button, but I linked it. THe linkage name is "sound1" here is the code;
[Code]...
I am trying to assign a sound class, but found it was greyed out.
View 2 Replieswhether using a String as the key in a Dictionary results in slower lookups than using an Object, Class or Custom Object (an instance of developer defined Type)?
When using a String as a key, does the literal String have to be parsed, or does the Dictionary key point to the String Object?
How do I get the AWSD keys to work as smoothly as the arrow keys. I can put the arrow keys inside an enterFrame
[AS]onClipEvent (enterFrame) {
//move the tank
if (Key.isDown(Key.RIGHT)) {
[Code]....
If I put the AWD keys inside an enterFrame they run until I push another button
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
My code doesnt detect 2 kest at once.I want to press an arrow key and spce bar. In .net the below code does do this but in flash if I hold down an arrow key and press space bar the arrow key event will stop working.[code]
View 7 RepliesI have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 RepliesIs there any AS3 library or code-snippet that can create altered versions of a Sound object on-the-fly (at runtime)? Either based on:
An existing Sound object; A ByteArray object;
For example, say you have a "dry" sound of a gun-shot. You could:
[Code]...
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
View 3 RepliesI have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
I have some sounds in my library. They are all exported and have been given class names like C, D, E etc. I have another class that represents a button. This class stores a reference to one of the Sound in my library. I set the type for this variable to Sound. When I try to set it I get the error: cannot convert C$ to flash.media.Sound I try as Sound, for example key.note = note_array[p] as Sound; The value ends up as null.
View 2 Replieshow to add mute sound and unmute sound script in a single button?
View 2 RepliesI want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 RepliesI use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
Does anyone know of a way to dynamically read the sound levels of a loaded MP3 to help produce dynamic sound visualization in Flash?
View 5 RepliesHow to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
I have been at this for about 19 hours straight! I am going to go to bed immediately after this post, but for crying out loud, I have NEVER had this problem before today! Before anyone reads ahead and says 'you have to attach your sound object to a completely separate mc to be able to control it independently from all other sound/root volumes.' see if the following code accomplishes just that:
[Code]...
I have a broadcasting project that I've got where the host of the show can have multiple sound effects they can use on their show.I'm wondering if the only way to go about this is for all the clients listening to the show need to download the mp3 of that sound effect or if the sound effect could come from the host ...like combining his mic (for his voice) but also straight audio (the sound effect) into the stream.
View 1 RepliesIt appears my sound is off sync and the longer I play the movieclip, the farther off sync it goes. Its nothing too complicated, just some basic shooting sounds that fire every time I hit the space bar. My code is below:
package com.objects{
import flash.display.MovieClip;
import flash.media.Sound;
import flash.media.SoundChannel;[code]....
The Attack() method gets called from another class that handles all keyboard controls.when it gets called the sound then plays.firesound and firesound2 are almost the same. firesound2 sounds a little off pitch to make it sound more realistic.At first the sound sounds pretty good, not great. but then it gets terrible as time passes.
I made a new .fla project. and I attached the following class to it by it self. so the following is the only code in the entire .fla project and the issue still occurs. I press the spacebar and the sound starts a day late.
package {
import flash.display.MovieClip;
import flash.events.*;[code]......
