I have to send information to an external vendor using their existing parameters. However, they have included brackets [] in some of their variable names. As you might expect AS3 can't resolve the variable name. Does anyone know a way around this?
[Code]...
I am trying to pass a variable with brackets in the variable name. Example
productoption[]="value";
Whenever I publish the file flash gives me an unexpected "]" error code. Is it possible to have a variable name with brackets? I tried to use the escape codes %5B%5D to pass the brackets but that didn't work also.
I'm trying to do that trick where you make a variable name with square brackets. I think I don't fully understand what I'm doing though...
Code:
var cursorDirection1:Point = pt.subtract(rootpos1);
var cursorDirection2:Point = pt.subtract(rootpos2);
var farShoulder:int = 1;//1 = left 2 = right
[Code]....
I'm trying to avoid having to do a conditional to choose between cursorDirection1 or cursorDirection2. My last line there isn't working, I'm not entirely sure why. Assuming farShoulder is 1, the code should be interpreted as
Code:
cursorDirection1.normalize(findNormVar(cursorDirection1));
but I'm getting errors about the input being undefined.
I was wondering why brackets are still given in actions that dont have parameters?
[code]...
They work without brackets too, dont they?Not that it makes a lot of difference, but I was just wondering
I have a form created using Flash CS3 and I want to pass the following hidden value name:
optionprod[ ]
The only problem is when I publish the file I get and unexpected "]" error. How can I pass the value with the brackets?
I'm stuck with trying to target a movieclip dynamically from a loop. I'm using the square brackket syntax but I can't figure out why it's not working. Here's what I'm trying to do:
Code:
this.t1.t1._alpha=20;
And here's how I'm trying to do it:
Code:
this["t"+1+".t"+1]._alpha= 20;
I'm reading a book on ActionScript and I'm in the section on controlling movie clips. I'm reading about the basic methods, and I'm starting to realize I still don't fully understand the significance of square brackets.[code]Obviously, this is the prototype form of the lineStyle() method. What I don't get is why "thickness" is the only parameter without square brackets. I know that square brackets are used for retrieving data from an array or object, but either my book doesn't cover why they're used like this in a method, or I just completely blanked it out.
View 2 RepliesLet's say I have a function in a class with two required parameters and two optional:
Code:
public class Person extends Sprite {
private var haveToWork:Boolean;
private var hoursOfSleep:Number;
private var gotANewVideoGame:Boolean;
private var gotAHotDate:Boolean;
[Code] .....
All of that setup for this question: on the second call of the areYouHappy function, how do I keep the gotANewVideoGame variable from having a false value assigned to it?
I have an SWF that has a var that is a string called fullpath. Now, if fullpath was "game.item1", How would I evaluate it as _level0.game.item1 in brackets [] rather than _level0.game.item1.Basically, how would I evaluate an item path from a string with brackets []? This is AS 2
View 5 RepliesI'm working on a flash chat and I'm having problems with Regular Expression.
In Javascript this runs ok:
[code]...
My regex pattern works for but it ignores any letters in brackets.
I have a text file that needs to be parsed correctly. The text file looks like this:
[header]
[header 2]
[ header3 ]
I can grab these headers by doing so
var expression:RegExp = /[ [a-z0-9 ]+ ]/igxm;
var items:Array = text.match(expression);
But I would also like to remove the white space from before and after the brackets, so the headers can align against the left edge. Also, for [ header3 ], I would like to remove the white space inside the brackets, before "h" and after "3". What would be the correct regex for something this?
I have some classes stored in a swc which I would like to instantiate using data pulled in by xml - using a string to reference the classname.So where I would normally use
ActionScript Code:
var tagline:Sprite = new Tagline1();
I would now like to do something like
ActionScript Code:
var tagname:String = "Tagline1"; // really the string comes from XML
var tagline:Sprite = new [tagname]();
I have a vague idea this is possible using square brackets, but I don't seem to be able to find out anything about it.
Been trying to figure this out for a few but no luck. I want to just make a new node and add it to an XML structure. So I've tried things like :
Code:
var xmlNode:XMLNode = new XMLNode(1,newNodeName.text);
var xmlObj:Object = xmlNode as Object;
[code]......
I have a chunk of Code which Flash confirms is without errors, but when I either compile the program or click the AutoFormat Button, Flash puts a curly bracket at the end of it and then has the audacity to complain that there are "extra Characters found at the end of the programm."I have to have this running to go online on Sunday the very latest.[code]
View 3 RepliesHow to format JSON data without using brackets for an array?[code]...
View 3 RepliesI have five simple equations that I need help converting to ActionScript. I'm making a small "calculator" that takes input from the user and displays a number representing the result of the equation. They're two sets of equations: 1) three-scenario fee calculator to compare the annual costs (X) of renting versus buying equipment; 2) comparison of two rental plans. The numbers entered need to stay the same - the alphabets represent what the user will input. The equations are as follows:
Scenario 1:
X = ([A � F] / G) + H + I + J + (K x 12) + ([L / N] x M)
Scenario 2:
X = ([B � F] / G) + ([E x C] / G) + H + I + J + (K x 12) + ([L / N] x M)[code]....
I've looked at my resources at hand, but my brain just shuts down when I see numbers and letters representing numbers. I do speak three languages fluently, so I (think) I make up for it.how to properly assign the correct order of events (brackets first, etc) in ActionScript to reflect the equations above.
It was hard to sum the issue so here's what I mean in the title is something like the following:
ActionScript Code:
var rX:RegExp = /^([0-9]+-[a-z]+){3,5}$/i;
trace(rX.test("1-a")); // false
[code]........
I am kinda new to as3 and I have seen [] the square brackets used when trying to access array index but I have also seen some people use it in other places. I was just wondering what its exact function was.
View 1 Repliesf you know PHP...then you know that you can create a string variable...and then use the value of that variable to declare another variable. like this:
PHP Code:
<?php$foo = "haha";$i{$foo} = "success";print $i{haha};?>
and it would display "success"...or like this:
PHP Code:
<?php$foo = "haha";$$foo = "success";print $haha;?>
and it would also display "success".
i have a variable take away another variable which makes answer1 variable i then want answer1 to be to the power of another variable how can i do this in flash
View 5 RepliesCode:
var fruit1:String = "apples";
var fruit2:String = "oranges";
var fruit3:String = "grapes";[code]....
I need the variable fruit1, but for reasons I don't have time to get into, I don't know how to parse these two variables to make a parseable variable.
I'm trying to pass the contents of variable playnoyes to the long line of code below to decide whether or not to autoplay the flash movie, but doing it as I have below, the resultant line of code has the variable in quotes and therefore the code doesn't execute it as expected. My question is, how can I pass the variable so that the resulting line of code doesn't have the quotes around the variable value.
var playnoyes='true';
var testtext = "<script type='text/javascript'>AC_FL_RunContent ('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.[code]....
I want to declare a variable on the main timeline that can be called from anywhere in my movie. So, _global var should be the right approach. I want to declare a movie clip 'MC1' "open", or "closed" so that when it is revisited, my flash file knows the user has been there before and performs a different task from the one it does when 'MC1' was first encountered. So, i need a 'if' statement to run from the variable, when the playhead encounters the movieClip.
[Code]..
I have 2 movie clips, one being loaded into a container MC via "loadMovie();"In the main movie there is a variable with no value, in the external movie there are 5 frames, each with a value to update the variable in the main movie.
IE: if on frame 1, global value = 1 / if on frame 2, global value = 2 / etc etc I'm familiar with passing variables INTO an external swf, but am stumped on how to do it the reverse way.
var loader:Loader = new Loader();
loader.load(new URLRequest("panghat spa.swf"));
addChild(loader);
want to load panghat spa.swf as a variable by pasing variable from html page in to flash
I'm still learning flash and actionscript 3 and i am having trouble with variable and object names. I need to be able to combine variable names together (in the same way as php can combine by doing var1.var2).
My swf contains 4 loaders (image1_loader, image2_loader etc..) which are a child of (image1_content, image2_content etc.....)
I then have 4 buttons which load an image into the loader and while doing so they define the currently active loader.
Finally i have 4 control buttons - scale up/down and rotate clockwise/anticlockwise which should only control the currently active loader (as set by the buttons above)[code]...
As we know whent here is no such variable of null value assignment to a variable or instance flash throws this kind of Error.In one of my Application i need to get more flashVariables, They may or maynot come as FLASHVARS. But when i miss any variable flash thows this error as an alert box. is there any simple solution to avoid this kind of issue
when i use try,Catch statement the issue will not come, But i don't like to write Bunch of try,catch statement for all this kind of variables.
I would like to store a hex colorPicker value in a variable and then cast the value of the var backout to a textInput. The textInput is just to see witch hexcolor i have choosen.
thus meaning seeing 0x000000 in the textInput.
what i've done now is pretty simple i have bound the flex colorPicker directly to my textInput. but i want to store the value from the colorPicker in a var first and than spit it backout to the textInput to see the value that i have picked.
When i pick a color value that begins with the number 0 it drops the 0's at the beginning of the number and only spits out the numbers greater than 0. (000033 becomes 33, FF0000 stays FF0000). I want to catch the whole value or write some kind a function to figure out how many 0's got dropped and concatenate it together with 0x. Store that all into a var and bind it to the flex TextInput.
This is what i've got.
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml"
layout="vertical"
[Code].....
I'm still learning flash and actionscript 3 and i am having trouble with variable and object names. I need to be able to combine variable names together (in the same way as php can combine by doing var1.var2).
My swf contains 4 loaders (image1_loader, image2_loader etc..) which are a child of (image1_content, image2_content etc.....)
I then have 4 buttons which load an image into the loader and while doing so they define the currently active loader.
Finally i have 4 control buttons - scale up/down and rotate clockwise/anticlockwise which should only control the currently active loader (as set by the buttons above)
So my buttons as well as loading the image have the event listener:
image1_btn.addEventListener(MouseEvent.CLICK, setCurrentSelection);
image2_btn.addEventListener(MouseEvent.CLICK, setCurrentSelection);
(and so on..)
function setCurrentSelection(e:MouseEvent):void {
[Code]...
So within the rotateClockwise and rotateAntiClockwise functions i need to be able to recognise which is the currently active loader and have that number instead of the X - so if it is image1_loader - it needs to be image1_content, if 4 - image4_content... I had tried to do it as this but it doesn't like it being a string:
rotateAroundCenter((activeLoader+'_content'), 10, ptR);
how you would target a function's local variable through a concatenated variable string.For example:
var txt = "Hello World";
function testing(msg) {
var test1 = msg;[code].........
I'd expect the trace to be "Hello World" but rather is given "undefined". So if variables created outside functions are created on the main timeline, where are local function variables created and how would you access them?