I am trying to animate the circle to follow the cursor point. Its working fine, but when you move the cursor little faster the animation struck.
import flash.events.MouseEvent;import fl.transitions.Tween;import fl.transitions.*;import fl.transitions.easing.*;
var moveXY:Number;var speed:Number = 1;
[Code].....
I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
I have made a rotating images but the images are not moving smoothly. You can see the example at:-URL...Does anyone know why the images not moving smoothly?
View 3 RepliesRight I have a movieclip called Menu1 and I currently have a function that when called moves that movie clip to a set of co-ordinates. The function is run on a onEnterFrame. The codes is as follows
Code:
function moveMenu(xValue:Number, yValue:Number){
if (this.Menu1._x> xValue) {
[Code].....
So at the moment, the values (x and y) are passed to the function and it moves to that location 45px per frame and when it is within 45px of the target it jumps to the exact point.
1) I want the movieclip to accelerate and deaccelerate as it moves.
2) At the moment it doesn't take the direct route it only goes up down left right and at a 45 degree diagonal. I want it to go to the point in a straight line.
I've got a problem in actionscript3 with moving large DisplayObject-s. When the size of the DisplayObject is quite large (more than screen size) the movement loses smoothness and it looks like the object starts jumping forward and backward, which overall looks very unpleasant.
Does anybody know the way to fix that? I am trying to make a sort of a race game, where I need to move the background sprite to make the illusion of movement.
Code:
private var obj:Sprite;
private var canvas:Sprite;
// determines spatial spread of circles
private var size:int = 1000;
[Code]....
I have a movieclip (mstone) depicting a signpost, which is within another movieclip (graphic1). I am trying to scale mstone to increase by about 44%, and it needs to move along the screen in such as manner that it is moving towards the user. Some how the scale and the x,y coordinates I am providing don't seem to reflect the same way as it normally would, when I see the website live.
Is there a smooth way to move the clip, without specifying particular x,y co-ordinates?? I am using the _xscale, _yscale, _x and _y properties. Not producing the desired effect.
I've got a problem in actionscript3 with moving large DisplayObject-s. When the size of the DisplayObject is quite large (more than screen size) the movement loses smoothness and it looks like the object starts jumping forward and backward, which overall looks very unpleasant. Does anybody know the way to fix that? I am trying to make a sort of a race game, where I need to move the background sprite to make the illusion of movement.
View 1 RepliesI have a circle (bounding circle) offset from the centre point of my entity and I'm looking on how to move that circle around the entity as it rotates so that it's always in the same spot of the character.For example,say I have a bounding circle for the front of a car, when the car turns, that bounding circle needs to turn to So I have two points: position which is the position of the entity's centre point and offset which is the offset of the circle from that position. This assumes an angle of 0.
So if my car is facing 0 degrees: position (150, 150) and offset (50, 0) then the bounding circle would be at 200, 150.Now if I rotated the car 90 degrees, the bounding circle should be at position 150, 200.This is what I have now:
var differenceX : Number = _centre.x - _offset.x;
var differenceY : Number = _centre.y - _offset.y;
var rotatedX : Number = differenceX * Math.cos(_angle);[code]........But it's giving me these long ovals and now a perfect circle.
I am trying to move a line around in a circle, around a fixed point (not 0,0). As in the way a clock hand moves around with one end at the middle and the other end traveling in a circle. I tried the rotation function but that moves the entire object around (0,0), I need the point in the middle stationary and at a non (0,0) point.
View 9 RepliesRecently I came across a site showing a no. of images (probably 8 - 10) rotating around an invisible eclipse. When we put mouse-pointer over any of the images it's tip shows a linked site's name and if clicked that particular site opens up. Only one image is displayed perfectly which is on the top while rotating, while other remain blurred out not clickable. How to create such effect as I need to get it implemented.
View 1 RepliesI have a circle drawn on the screen, wherein I add a moving object. I want it to keep inside. My strategy is to calculate the circle's radius and compare it with the distance the moving object is off its center. I beleive it's the proper solution. However, I'm having a problem with letting Flash know when the running guy should stop, so he doesn't leave the circle and ruin all the fun. Here's the code I'm using (it's not working of course):
function moveTheCreaturesRightwards(event:Event)
{
if(maleMovingRight == true)
{
[Code]....
The line: rayMale.width = maleRadius.width; was added when nothing else had seemed to be working
I have a MC that follows the mouse. I want to do so the MC will smoothly/softly stop when i stop moving the mouse. Is it hard to code, And it would be very nice if someone could do some code for it
View 2 RepliesI have an object called point that I can move around the screen with my mouse. This object has a vector mapped through it (_v1) using the center of the stage and "point"s x,y location in order to draw the vector (note all of this is working fine). My problem is occurring when I set up was a button that simply sets a value to true if you press it. The idea behind this button is that when pressed, whatever location "point" is at, it will move 1 degree clockwise in a circle around the center of the stage (this is all happening in the frameHandler so I can keep clicking the button to make it continue around the stage).
The code I am using is based in an if statement listed below:
if(clockwisePressed) {
var v1angle:Number = _v1.angle;
v1angle++; //increase the angle by 1 degree
if(v1angle>180) {
v1angle -= 360; }
[Code] .....
So what is happening here is that clockwisePressed has been set to true so this fires off. My vector (_v1) is set up to tell me the angle (already converted from radians to degrees) but it's a read-only value. So I assign it (_v1.angle) to v1angle so I can mess with it and increase it by 1 so I'm moving clockwise around the center of the stage. Then I just check to make sure that it falls into a range between -180 and 180 (if I trace _v1.angle around the stage, 0 degrees is to the left, 90 degrees is straight up, 180 degrees is to the right, and -90 is straight down). Now using the formula I derived from this thread but converted to work with 0 degrees pointing to the left and the value for Y going up the further down the stage you go, I came up with
x = centerX - radius * cos(angle)
y = centerY - radius * sin(angle)
Now when I make a sample chart on paper and use these values on my calculator, this works like a charm. If I plug in an angle, the radius, and center I get a point right on my circle I draw on a sheet of graph paper. However, when I actually try this in flash, the "point" jumps all over the stage. (Note that _v1.m is just the magnitude of the vector between the center of the stage and "point" which is the same as the radius). So I trace everything and the values for cos and sin don't seem to be coming out right. For example, if my angle is -1.9581 and I take the cos of that on my calculator I get something along the lines of 0.9994 but flash traces Math.cos(angle) to be -0.3777. Isn't using Math.cos(-1.9581) the same as putting -1.9581 into your calculator and hitting cos?
Below is the corrected code that works:
if(clockwisePressed) {
var v1RadAngle:Number = Math.atan2(_v1.vy, _v1.vx); //get angle in radians
v1RadAngle += 0.0174; //increase the angle by ~1 degree more or less
//Now just move the crosshair and get it ready to be redrawn
point.x = centerX - _v1.m * Math.cos(v1RadAngle); //_v1.m = radius
point.y = centerY - _v1.m * Math.sin(v1RadAngle);
clockwisePressed = false; //remove button pressed boolean
}
I have a circle and a big square. The circle can be moved using the keyboard. I want the square to act as an obstacle, so the circle cannot be moved into it and the circle stops when it hits it, just like a if i were to try to walk into a building. Is there an easy way to do this?
View 7 RepliesI want the final result to be a stage with a certain number of circle MC's moving around. I have made the circle MC, and added the AS so that it will start at a random point with a random color, then start moving around randomly. I want to make it so that In the beginning the document will duplicate the movie clip x amount of times, using a for loop. I want to then have all the new circles move around, and when two circles hit each other, they will dissappear, using the removeclip function. You can only use this on duplicated movieclips though, so how would i make all the circles duplicated? Is there a way to duplicate the original movieclip x amount of times then delete it? Or is there a way to remove the original after it is in a collision? Also I don't know how to do the collision detection. I am thinking of using a hittest, but would I just do it with a for loop? Is there a way so that if an MC hits any other MC?
View 3 RepliesIn AS3 is there an easy way for collisions to take place between a moving circle and a rectangle object. A moving circle has a direction and you need to know how it collides with an object rather than knowing it just hits. In .net you use a points test where you test several points around a circle to see what hits an object and then you can work out what direction it will bounce off.
View 2 RepliesI'm trying to move an object along circlular motion guide dynamically using two buttons -- a left button, when pressed down, will move the object counter clockwise, and the right button clockwise.
View 2 RepliesI have a circle and a square on the stage. When you click on the square the circle will go to "circle._x = 300" when the circle is at 300 I want to make it when you click on the square the circle will go "circle._x = 45"
Code:
moveCircle = function () {
circle._x = 300;
if (circle._x >= 300) {
circle._x = 45;
}} square.onRelease = function() {
moveCircle();
trace(circle._x + "is the position of the circle");
}
I'm trying to implement a aabb to circle collision.
[Code]...
Somehow the collision does work as expected. Either they never move at all and "collided" was traced, or they'll continue moving and never collide when I tried swapping values around. Is there something i'm missing in my logic??? My box-box and circle-circle collision are working fine.
i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesI have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesI`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 RepliesI want to create circle, and put 8 points on it. So, user can drag each point in order to change it's shape.
Is there any way to do this in flash?
I have some following code:
Ref. - How to draw a continuous curved line from 3 given points at a time
package{import flash.display.Sprite;
import flash.events.MouseEvent;
import flash.geom.Point;
[Code].....
So, can anyone convert these three point curve line to 8 points circle?
I have to draw a circle using action script. The Circle Diameter has to be controlled by a button.
View 0 RepliesTrying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code:
var xmov1 = xSpeed;
var ymov1 = ySpeed;
var xmov2 = ballRef.xSpeed;
var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
Here I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
View 3 RepliesI have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
View 5 RepliesI have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
View 4 Replies