ActionScript 3.0 :: Get The Proportion On A Text?
Feb 11, 2011
I need to get the propotion on a text and NOT the textfield that the text is in. I've have trying to use a bitmap and then get the highest and lowest pixel (Y) on the text and also the moast left and right pixel (X) and then take the difference in X/difference Y and then get my propotion. Unfortunately i won't get the same propotion as if I'm looking och a text written in eg word.
Dose anyone now why? Can I found the propotion in any other way?
View 3 Replies
Similar Posts:
Dec 7, 2009
We have a Flex application which doesn't currently use the Flex framework as an RSL. We're considering switching, but we're not sure what proportion of users will already have the framework cached.There's an added complication in that we're using the data visualisation components too, and we may have a choice as to which version of the framework we use.
View 2 Replies
Jul 10, 2009
I have a few movie clips which all have specific registration points set I need to scale them down in proportion according to the registration point. If am looking at the stage, hold down the shift key and resize the movieclip it works exactly how I would like it to.
However, I need to do this dynamically using AS3. I have been scaling the movie clips etc but I cannot figure out how to emulate holding down the shift key in AS3, so that the movie clips are re-sized in proportion according to the registration point.
View 1 Replies
Feb 27, 2009
I'm using the code below to resize a mc so that it fits a full screen browser even when its resized. Its working fine but...
How do you make the mc (bga) resize in proportion. At the moment it squashes & stretches
// ***Stage aligned top left
Stage.align = "TL";
// *** Stop the stage from scaling with the browser window.
[Code]....
View 2 Replies
May 14, 2008
i am building a website that has a fullscreen background image that resizes with the window when it is scaled and the content stays in the center, i have most of the site built but when i scale the window the background image distorts and doesn't stay in proportion...I need a code that keeps the background image from distorting if you scale or resize the browser window.
Here is an example of what I'm talking about- [URL] go to the company section. I used this tutorial for reference in building the site- [URL]
View 3 Replies
Apr 14, 2010
We are experiences a phenomena that flash clients connecting to a live (pre recoreded)stream served from FMS (we use 3.5.2), have their buffer grow out of proportionit is alsoccompanied mostly with a complete video freeze, until the browser crashes.(you can expect a crash after having more then 4000 seconds of video buffer active in memory)The more we switch streams via a playlist,the more this seems to happen,Thus, streaming long video feeds keeps the system stable, but when injectingfeeds into a main stream and switching back increases the probability
View 7 Replies
Feb 9, 2011
I need a video which has been embedded into Flash to stretch, regardless of aspect ratio.This video will then reveal some content which I don't want stretching at all.I've tried using the "exactFit" scaleMode property and tried to find a way of that only affecting the video and not everything in the swf, but I failed. I've also tried using Stage.width/height and applying it to the dimensions of the video but t
View 2 Replies
Aug 22, 2006
This goes out to Scotty or any other guru floating around out here. I need the image_mc movieclip in this .fla to scale to fit browser, however i need the image to scale in proportion. I would also need a listener of sorts that will NOT allow the image_mc movieclip to scale below the stage size of 1024 x 768.
[URL]
View 4 Replies
Oct 1, 2009
I used to have a little text panel (that sat with the color, swatches, and align panels) that I was able to open up and edit text size, color, underline, etc with. It had a much better text editing ability then the properties panel, seeing as the properties panel does not even bother to allow me to underline text or to highlight and edit a single word in a whole text box. Now I don't have it, I can't find the damn thing anywhere, and I want it back. How can I get it?
View 1 Replies
Apr 25, 2011
I am still using flash MX. I'm pulling random text from a textfile (array.txt) into movieclip instance textbox.[code]All is good, but now my question is if I can have a text effect as well. For example having the random quotes typed out as they appear.
View 16 Replies
Aug 28, 2011
When I create a TLF text area that is editable at runtime (which means that it can get a user input at runtime) I set the text direction to the 'right-to-left' definition in both the 'container and flow' and the 'paragraph' sections and set the language for Arabic or Hebrew at the 'locale' setting. I also set the text alignment to the 'align to start' mode. Now at runtime there's a stange thing. When I try to click with the mouse cursor on the editable TLF text-box, it's not displaying the text icon cursor and don't allow me to insert text inside.
But when I move my mouse cursor over the right side of the editable TLF text box, it change his appearance to the familiar text cursor which indicate that if you click here you will be able to insert text input inside. So my problem is how can I make it that only when I will hover over the TLF text box itself, the mouse cursor will be changed to text cursor icon and when I will hover beside its right side, it will remain at the normal cursor mode.
View 1 Replies
Nov 23, 2009
I need to put together an editable text area that has a custom caret (cursor) which is different from the default blinking vertical line. Is the caret a "skinnable" property of text input? note that I am not asking about the mouse pointer cursor which can be set using the CursorManager.
View 1 Replies
Apr 24, 2010
Problem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
View 1 Replies
Feb 4, 2009
Trying to format input text fields using format buttons in Actionscript has been challenging. I've been able to put some pieces together, however I am still missing some things. Here's my code:
Code:
function selectText() {
startSelect = Selection.getBeginIndex();[code].........
I need the ability to click the Bold button and it bolds or unbolds at the cursor so if I hit the bold button what I type from that point on will be bold until I hit the button again and then it goes back to regular. I am able to change it to bold or unbold by selecting the text and clicking the button but I also need to do it without selecting.
View 3 Replies
Oct 13, 2009
Is it possible to create gradient text with text in a text field, without using a different object?
I have three text fields sitting right next to each other, to create a row. Some times the text is longer than the width of the text field, I don't want to widen the the text field to make it fit, I just want to fade the last 20 - 50 pixels of the text out.
Is this possible to do without using an object above it, such as a gradient?
View 2 Replies
Nov 28, 2006
If you take a look at my flash movie you will see that I have draggable movie clips, which contain dynamic text fields. These text fields contain text drawn in from a simple xml document. The problem I have is that the text in the text fields is hedged right next to the border of the autosized text box. This makes them look untidy and in the worst case difficult to read. I wonder how I can add some margin to the left and right of the text to fill in some space.The code which formats the text boxes is:
with (main["dragAct"+i].dragActText) {
text = actText[i+1];
background = true;
[code]....
View 2 Replies
Jan 27, 2009
I have 4 dynamic text boxes which duplicates the text from a main input text box. How do I write a code to make visible only the dynamic text box I want when clicked it's check box.What is the CODE to make each "DYNAMIC TEXTBOX" visible when clicked on it's checkbox?
View 6 Replies
Nov 21, 2003
I have a problem with a dynamic text field. I have 1 text field on frome 10 which displays text from a text file. This text can change when a button is clicked. I have another text file on frame 20, which i want to display what ever text is in the text filed on frame 10.
I have tried:-
[AS]MyTextboxFrame20.text = MyTextboxFrame10.text;[/AS]
but it doesn't work.
View 3 Replies
Jun 8, 2006
I have the folowing codo to load text from a text file into a text field in my flash document:
loadVarsText = new loadVars();
loadVarsText.load("homePage.txt");
loadVarsText.onLoad = function(success) {
[Code]....
the same, and I want to make the homePage.txt file load when the flash file starts, that is what it does right now by placing the code on the main timeline.
View 3 Replies
Oct 22, 2007
I'm trying to make a text box that loads text from a text file. I've accomplished that, and now I want to have it so when I click a button is loads another var from the file by changing the end number. Here is my code:
myNotes = new LoadVars();
myNotes.onLoad = function() {
i =1 ;
[Code].....
View 5 Replies
Mar 3, 2010
I create a dynamic text object on my stage. I set the family to Arial and style to Bold. When I change the text by setting the .text to something else, the bold goes away and it just becomes Regular. How can I make it stay Bold?
View 1 Replies
Aug 19, 2009
Is it possible to add text in and existing dynamic text box which already has text in it. Not at the end but in between some predefined characters or word.
View 2 Replies
Jan 5, 2010
Does anyone know why text put into a dynamic text box would look different than the same text with the same font, size, etc in a static text box. The dynamic text looks jagged and pixel-y, while static box looks normal.
View 7 Replies
Feb 22, 2009
been wondering if it's possible to load external text(for example a text from notepad) to my "text area" in flash.?
View 3 Replies
Jul 24, 2009
I'm trying to pass text from an input text in frame 1 to a dynamic text field in frame 10. Thus when the user enters text and clicks the submit button it takes them to frame 10 and shows them what they typed. It's not working but I'm not getting any errors. Here's the link:
[Code]...
View 3 Replies
Feb 3, 2007
Currently I'm using javascript which works fine to pass text from textfield A to textfield B:
Code:
window.onload=function()
{
document.forms.form1.shirtText.value=document.forms.form1.KitGroupID_16_TextOption_38.value
}
Is there a way to pass the textfield A text to a dynamic text input (flash) as I'd like to use the font embedding flash offers. I can make it work when loading a value from a txt file but I'm not sure how to access the value identified above as KitGroupID_16_TextOption_38 and make it appear in a dynamic input box. Eventually I might want to have 3 font choices for the user but I'd like to just see if I can get this working properly first.
View 1 Replies
Jun 7, 2011
I'm playing around with a messaging type of application. Does anyone know how, or of any tutorials on to "appending" html text to text areas in flex and flex mobile projects? And specifically how I could take that and basically "append" a sprite inline to the text when i need to? Something simple like:Username: some text right here!So, Anyone have any experience "appending" sprites or simple text formatting?how to solve these issues!EDIT:Based on an answer below it was sugguested that it's as simple as...textAreaInstance.htmlText += "<b>Username:</b> some text right here!";But its not. you can't do .htmltext with a text area. you can on a text field, so i tried
var TF:TextField = new TextField();
TF.width = 200;
TF.height = 200;
[code].....
View 3 Replies
Oct 1, 2010
The textfield on top is made from code, left is without bold and right is with bold
PHP Code:
var tform:TextFormat = new TextFormat ("Comic Sans MS", 12, 0xFFCC00);
var tf:TextField = new TextField ();
tf.defaultTextFormat = tform;
[code]...
The textfield on the bottom is made from the text tool in the IDE, left is regular and right is bold.This is all the properties of that textfield.How do I make the top text look like the bottom text? I think the bottom one looks nicer than the top.
View 4 Replies
May 8, 2009
I have a text field component that I am dynamically populating with text. The words appear one letter at a time in a teleprinter style fashion. I also have rendered certain words with HTML to make style changes within the text.Now all this works fine, except because the HTML text is larger than the body of the other text, I am losing theteleprintereffect at the bottom of the text field. In other words, after a set amount has been printed, users are not seeing the letters printed out one at a time, but instead just get a printed line of text appear from beneath the visible section of the text window.
View 2 Replies
Oct 15, 2009
I want is to take a the text from and input text box and when you press a submit button have it post to a php page. All was going well... but then I changed my code from value1 = "password" to value1 = password.text; and the php instead of coming back with the user's password, comes back undefined. WHY WHY WHy, does it except it when I say value1 = "password" and not with the value1 = password.text; (and 'password' is the instance name of the input text... (not using flash vars)
[Code]...
View 14 Replies
