I have a movie that loads a head and a body onto the stage. I want to send it a command to delete the existing load different heads and bodies. Heres what I have and in theory would like to do:
[Code]...
I have a movie where I have three head tweens fading in one after the other (they do not overlap). What I am trying so hard to do is to be able to RollOver one of the heads and have information gif "COVER" over the other 2 heads so long as RollOver is true. Once RollOut I want to be able to RollOver another head and have an informational gif obscure the other 2 remaining heads,, and so on.
I am pulling my hair out because depending on the order/level my informational gif will not cover over but lay beneath one of the later heads.
how can i change this as3 code with hex editing to make this game always show HEADs (or tail ) and be winner its game to bet and u should choose head or tail , and if u guess rite u get money ,if not u lost money i want to always answer be head( or tail) .as file attached.
[Code].....
I have already foud out where I want to place my sprites in my game, and I don't want to have to go through th elengthy "duplicateMoveClip" procdure (or it seems to be lengthy to me anyways, it's probably like 2 lines of code, but still, I WANNA DO IT MY WAY!) ok, anyways, does delete only work on variables and not movie clips?here's what I have so farthis is in the bullet movie clip:
Code:
onClipEvent ( enterFrame){
if (Key.isDown (Key.SPACE)){
[code]....
How come this code is not working:
PHP Code:
voca = new Object();
voca.onKeyDown = function( {
[code].....
I've got a .swf file called "page01" that, at the last frame, calls another .swf called "page02". The code works fine, but since it's an addChild my page02 appears ABOVE the one already existing. I started searching for replaceChild function, but found nothing relevant...
Here's the small code :
stop();
import flash.net.URLRequest;import flash.display.Loader;import flash.events.Event;import flash.events.ProgressEvent;
[Code]....
i want the body to move forward and back, without the head and legs moving. so it's kind of like a thrust i want to do, how do i do that
View 1 RepliesI am working on a project in flash cs4 and have Adobe Air 1.5 as player as this will be air appi. But other than using localstore to save my data everything else is pure flash as3 code. Nothing special really. And I was just about to finish it when this problem occurred. If I delete a layer that has nothing else but a picture inside which I was using to position movies correctly, everything in frame 3 where my main code is stops working. It doesn't trace anything, it just stops but actions on frame 1 and 2 work just fine. I don't get any errors either.
I deleted all the code from my main action layer in frame 3 and it still doesn't trace simple trace("aa");. As if everything I've put on the layers can't be changed or it just stops working. Same thing if I change a sound in the library, just updating it with another and it stops working. I just can't find the answer really. I rearranged things, deleted movies, basically everything and still no answer. I even tested it in flash cs3 and same thing happens. But I used this kind of methods before (deleting layers that I didn't need) and never had this problem before.
I am trying to detect bodies which are near current. To do it, I've created quite a big collision shape, around the current body, and made it sensor. Collision event was triggered, but it's not what I need. Main thing is that collision event is called only first time when another body entered the detection field... And I want to be able to detect changes in bodies location, after it. (I am considering the fact that other bodies are moving inside detection field)
View 1 RepliesI have 2 questions:
(1) Is it possible to attach a more complex shaped body as one of the links, and still be able to control it as a line in circular motion? (for a clearer idea see URL...
(2) When you try to change the connector or follower lengths, the line lengths do not changed, even though they have been scaled to the distance between the points.
Recently, I found a great little Flash project that acts like a jukebox for external mp3 song files, and am using it on my website to play my song demos.I'm now trying to find if there is an existing solution like that for video. I just need some way to progressively download video files from my webspace when the thumbnail is clicked... and am now looking into some sort of Flash jukebox.
I've tried just embedding the video files into HTML, but they don't progressively download for some reason (even though they are saved as Progressive With Compressed Header). I've even tried using prettyPhoto (...a script that mimics a Lightbox like feature, where the whole page dims, and a floating window appears over your site, displaying any media, and allowing you to move back/forth through your list of media)..... works great, but again, not a progressive download, so you stare at a blank screen for a while.
Seems the only way it works is if I have the file on YouTube or some other site, then embed it or use the prettyPhoto app.So, can someone either tell me how to make the embedded file download (OT, but I figured I'd ask), or point at some existing Flash file that serves as a video jukebox, showing all media on a common window?
I have Main.fla and SkinA.fla. Both have MovieClip library item: MC_BrandLogo.I'm loading the SkinA.swf into Main.swf in the current application domain trying to replace the class inside Main.swf. If there is no library item in the Main.fla, I can instantiate MC_BrandLogo with the correct graphic. If the MC_BrandLogo already exist in the Main.fla then that graphic is used even though I loaded new one in the current application domain.Is there a way to replace existing linked movie clips with loaded dynamically?
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onSkinLoaded);
var context:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain);
[code].......
i am listening contact between dynamic bodies. But cannot listen contact between dynamic and static bodies .
I can handle collision detection on my b2contactListener class with this metod.
public override function BeginContact(contact:b2Contact):void {
// getting the fixtures that collided
var fixtureA:b2Fixture=contact.GetFixtureA();
[Code].....
i've created a tree using an xml file. now i want to load an another xml file on clickinh the particular node which contains the path of another xml file..can any one guide in this regard...
actually i've called a handler on clicking the node and reading the path then calling urlloader methodds for loading another xml file ..but beforeloading the file the control goes to next instruction.
I'm using the box2dflash library to create a game, and so far I've been using "SetPosition" to instantly move a body from one place to another... the problem is that it obviously skips affecting other bodies when I do this. I have the body set to bullet... now I just need to know how I calculate the force(?) to get the body to the exact coordinates that I need to move it to... preferably after only a single frame.How would I go about doing this in box2d properly?
View 1 Replies0i am looking for something easy enough, but i can't find the right way it seems mission: when a button is pressed i want to load a mc (no swf) from my library, play that and when it's done playing(the mc) it deletes. purpose: i just want to make somekind of "flash" "blink" when a button is pressed. when another button is pressed the "blink" loads again. i tried it with the my_mc. _visible = true/false code. but it just doesn't work out.
View 6 RepliesIs it best to load the preloader from external file or place it directly into an already existing movie?
View 3 RepliesI got these four errors when I tried to create a button on the stage that would delete the text I inputted in the inputtext(ti). Based on the scripts I have and the errors, what should I write to create the delete button?
[Code]....
I am implementing a flex auto-suggest combobox - as the user types in each character: Consider the string 'Stackoverflow' and user input = 'st'
1) the data provider is filtered to show all items starting with 'st'
2) text is set to auto-suggest string such that the un-typed part is highlighted.
So for instance, the combobox text may contain st'ackoverflow', where 'ackoverflow' is highlighted using setSelectedIndex()When I hit back-space or delete, and check the 'this.text' value, I expect that the last un-highlighted character ('t' in the above case) gets deleted and the data provider is filtered to show all items starting with 's'. However the text property contains 'st', as before
iam loading in jpg's thru xml -- now when they load in they are fading in so i have this
holder_mc is my movieClip they are loaded into
[CODE]...
how can I check if "delete this.onEnterFrame;" is working or not?
View 5 RepliesIs there any method how can I check if "delete this.onEnterFrame;" is working or not?
View 5 RepliesAll I'm trying to do is load an external .swf file into a precise location on the stage of my existing Flash file. I've spent an hour and a half on this site search and found nothing. What do I add to my loadMovie command to place the file at specific x,y coordinates?
View 3 RepliesI've seen the Loom project, but are there any alternatives that are more mature (and actively developed)? I am looking for something that would allow load-time weaving of pointcuts into existing binary code at runtime with the AVM2 runtime.
Has any work been done in this area?
I'm trying to declare a movieclip variable in a class by finding the instance name of the movieclip.
On my stage I have a 'Container' (linkage class name) MC, inside that is a 'PlayerInfo' (linkage class name) MC inside that is a 'healthBar_mc' (instance name) MC. healthBar_mc is what I'm trying to access.
the class where I'm trying to run this function is linked to a MC inside 'Container'
So I tried the following code:
[Code]....
I'm trying to use XML to load in 4 images to a movieclip within a movieclip that is already created on the stage. I'm trying to do this in a loop since there are 4 movie clips I'm trying to access. I can get it working without the loop, but it's figuring out the syntax that's causing the problem. Currently I have the following code:
function ParsePics(picsInput:XML):void {
var picsList:XMLList = picsInput.pic.image;
for (var i:int = 0; i < picsList.length(); i++) {[code]..............
I am adding a MovieClip to the container with the following code
ldr = new MovieClip();
ldr.graphics.beginFill(0xf0f0f0); l
dr.graphics.drawRect(xPos,yPos,IMAGE_WIDTH,0);
[code]......
I have many MovieClips and each has a name like "mcDummyClosed" and then and instance name "slideDummyClosed". Another MovieClip has a link to e.g. slideDummyClosed which I then call DummyClosed. I add a MouseEvent.CLICK event to DummyClosed.
Now without adding slideDummyClosed to the stage nor any other MovieClip can I with a string containing it's name get that instance? I've tried using getChildByName() but that only seems to work if I've already added the MC to be found and added before. My code looks something like this:
[Code]...
I am not sure if this is even possible so this is why I am asking. So you know how we can access a nested movie clip by name with the following code:
mainMC.getChildByName("nameOfMC");
I was wondering if it is possible to do the same thing with XML data. So for exaple:
xmlData.house would be mainMC.getChildByName("house");
(obviously I know that getChildByName doesn't work for XML and am looking for an equivalent command)
I have an existing movie clip on the stage and i want to load a .swf into it. How?
View 9 Replies
