ActionScript 3.0 :: Have Two SWFs On An HTML Page. One Loads Fine And The Other (loaded Externally) Apparently Fails?
Sep 13, 2010
I have two SWFs on an HTML page. One loads fine and the other (loaded externally) apparently fails.
I get this from the server:
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
I get this when testing it locally in Safari:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I don't really understand where the hick-up is... because my paths are actually quite simple. All my flash files on the website are located in the same folder. The first one loads in fine, but the one being loaded into it does not. When viewing the SWF by itself, everything checks out as well.
View 7 Replies
Similar Posts:
Mar 6, 2009
I have a page that can be seen here: [URL]
As you should be able to see, it seems as though the Flash file on the left is causing the one on the right to reload upon final loading. The one on the right will reload itself once the one on the left finishes loading.
I have tested the flash files by themselves and both load only once when loaded by themselves. It seems as though one is causing the other to re-load which is just mind boggling to me.
View 2 Replies
May 5, 2009
I've got my swf which plays fine when opened in a browser - it's a container called 'country' that's coded to load the different clips (clip1.swf, clip2.swf, etc.) - but when placing it into an HTML page it won't load the clips and I'm thinking it's because of some actionscript error.
[URL]
Scripts are all loaded on the server in the /Scripts/ folder Below is the ActionScript from the country.swf container that loads the clips. what I'm doing wrong to get it to load on the HTML page?
function _playClip(fileName)
{
var clipName = fileName.substring(fileName.lastIndexOf("/") + 1, fileName.indexOf(".")) + "_mc";
if (_root[clipName] == undefined)
[code]....
View 2 Replies
Feb 17, 2011
I'm loading in swf files into a holder swf and want to position each loaded swf underneath eachother with a 10px margin.
This is what I have so far, Its pulling in all the data correctly now just want to position the loaded swfs.
import flash.display.LoaderInfo;
var swfLoader:Loader;
var xml:XML;
[Code]....
View 1 Replies
Apr 11, 2005
I have the buttons at the bottom of my site load each "section" of the site from external swf files in the same directory as the main movie. When you switch back and forth between the sections there is a flash (like its loading the swf file every time you press a button maybe?). I have each section loading into the same container. I tried multiple containers but I couldn't figure out how to stop one from loading over the other, then you couldn't see the previous swf anymore (once a new one loaded it was on top of the others). Basically something to do with loadMovie and containers I guess. Here is the work in progress. The buttons load the external movies on release into a container.
>>> Flashing External SWFs <<<
What I want is a nice transition that you don't notice. With that flash you can basically tell its loading a new clip in. I want it to be seemless to the viewer.
View 4 Replies
Dec 3, 2010
Using: Flash CS3 Pro, AS 2.0
I have split the 20min presentation into a series of swfs that load into a main swf that holds the "container" movie clip. I originally added a timeline based preloader inside each swf but apparently the client wants the whole thing to be seamless (no "loading..." screens). I am completely at a loss as to how to basically preload the next swf while the current one is playing.
View 2 Replies
Jul 25, 2011
I am trying to load multiple swfs (one at a time) using one loader and pause/play the loaded swfs using a button. I have gotten the swfs to pause/play, but all except for one will delete itself upon resuming. I made the loaded swfs in Captivate. Each Captivate swf is made up of multiple Flash swfs, each on its own slide. When the swfs delete, they only delete the currently playing slide's swf and then the next slide's swf will appear and play when the timeline advances to it (but will also delete if paused/resumed), but the playbar will show that the swf has been successfully paused and restarted and will continue along with no swf showing.
Here is a short version of my code (becuase the original has 8 swfs to choose from):
function(){return A.apply(null,[this].concat($A(arguments)))}//HERE STARTS THE ATTACHMENT BUTTONS REFERENCING FROM THE mainMC
var ansaldoButton:DisplayObject =
[Code].....
View 1 Replies
Dec 9, 2011
I'm trying to load external swf files and, using as3, have them play consecutively so the final product is a seamless animation. Below is the scripting I'm currently using to call and play the first scene, how do I make it go to the next one? All the material I've found on this is related to buttons and I'm not experienced enough with AS3 to adapt that to what I'm trying to do here.Here is the script I'm currently using...
var Xpos:Number = 0;
var Ypos:Number = 0;
var swf:MovieClip;[code].......
View 1 Replies
Jul 9, 2009
I am running into a curious problem with Flash CS4 Professional.I am running Windows XP Professional SP3, and working locally off my hard drive using SVN for version control.The problem I am having is with loading an external SWF into my "master" SWF.I am using ActionScript 2 exporting to Flash 8 (due to project requirements). When I run the SWF that is being loaded externally (standalone), it shows my changes from when I modify my class files. However, once I load it into the master SWF, the changes are not visible. If I modify the FLA itself, the changes are shown, its just when I modify any class files, the changes do not show.This is very strange and I have no idea why I am having this issue.I have outputted the _url of the SWF and it is loading the correct file.I tested it on another machine, and I did not run into the same problem.I deleted everything out of the ASO folder and that did not fix anything. Since I am not the administrator on my machine, I have tried everything other than reinstalling Flash.
View 9 Replies
Nov 2, 2009
I have a set of SWFs loaded, and have successfully added them to the stage, and can assign basic methods ( gotoAndPlay(), stop() etc..) based on MouseEvents. I can't quite figure out, however, how to assign methods based on frame number or label, triggered by labels on the currently playing SWF timeline. So, for example: externally loaded swf starts playing, and a listener is set up to listen for a "stop" label, which would activate stop();I can obviously just drop a stop(); in the timeline of the loaded swf, but I am really trying to banish all code from timelines, period.
I could set up a frame-based listener to decide if a label exists at the current frame, and then to evaluate if that frame label == "stop"... but that seems pretty messy, and because it has to run at every frame, CPU heavy...So - the question is really about listeners, I guess. What event would I listen for? Something like a MouseEvent - but ... a LabelEvent instead Obviously - this doesn't exist, but something like it would be perfect. tions scattered here and there isn't that big of a deal
View 3 Replies
Nov 18, 2009
So - I'm building a generic preloader to apply across my site... functionally it's working fine - but I have this issue, however, where the loaded SWFs start playing as soon as they exist in memory - rather than when they hit the display list.Because this preloader is 'generic' I would like to avoid any specific timeline control of the loaded 'child' swf by the preloader. This has proved itself tricky, and really my only successful workaround has been to set up a timer delay on the child swf that delays progression of the timeline until the preloader graphic has had a chance to remove itself (an alpha out routine). What would be perfect is if there was a way of listening for an 'addedToDisplayList' event - used in the child SWF. Note that the child swf is loaded into the display list at the end of the the 'alpha out' routine.I tried setting up a custom event to be dispatched at the end of the alpha out routine... but couldn't successfully target it in the child SWF. In lieu of a better method, this might be worth working on further
View 3 Replies
May 7, 2009
I was trying to get two swfs loaded into a main swf to control each others timelines. This is what I've tried out:
Code:
Select allpackage{
import flash.display.MovieClip;
import flash.display.Loader;
import flash.events.*;
import flash.net.URLRequest;
import fl.transitions.easing.*;
import caurina.transitions.Tweener;
public class LoadTest extends MovieClip{
[Code] .....
View 1 Replies
Apr 19, 2004
I have 2 movies, one which holds a navigation menu and some music playing options, and the other which is my main movie. The main movie has an empty clip which loads the navigation and sound into it. However the music does not play in the main movie.
View 6 Replies
Sep 17, 2007
I have 2 movies 1 loaded and 1 not loaded. How do I send variables from the loaded 1 to the not loaded one when it loads?
View 7 Replies
Oct 28, 2008
I am trying to create a graphical representation of the DisplayList of a flash site that is loading many external swfs. I want to be able to filter what is displayed (ie. Show only textfields, or show only images, or show only whatever). I have not been able to find a way to distinguish or select only the swfs. I would like this to be able to list ALL the swfs that are used in this projects and nothing else..
View 2 Replies
Sep 1, 2010
I've been searching for a solution for this problem for the best part of this day Here's my scenario,I have a swf of class a class i've called sceneHolder, it loads up an xml file and uses this to determine which external swfs to load up, the swfs are loaded up and into loader's then their contentLoaderInfo.content is addChild'ed to a movieclip in sceneHolder called myScene, they are then positioned and so on.
Another item loaded from the sceneHolder library is also loaded into myScene.Then, on the press of a button I call this
[Code]...
View 2 Replies
Mar 31, 2009
I have an external swf I created, I used the Document Class to place assetts from the library onto the stage. I have a few Movie Clips I set the buttonMode to true on and added a few MouseEvents for when they're clicked on or rolled over to load content and make a few draggable.
It works perfectly in that swf, but since most of my assets are in the library and exported on Frame 1 I can't really use an internal preloader on it. So what I did was create an external swf that all it is is a loader that I add to the stage that loads the first swf I created.
That works perfectly for getting it on the stage, but the Movie Clips no longer are recognized as buttons and the mouse events aren't working anymore.
Is there anything I can do to change this?
Here is the code I'm using to load the external swf:
Code:
var a:URLRequest = new URLRequest("timeline2.swf");
var b:Loader = new Loader();
b.load(a);
[Code].....
View 1 Replies
Aug 24, 2011
I am having an issue with a class I'm working on. I currently load an image as a bitmap and store its data into regState:BitmapData so that I may make new instances of that image later on. When I test if I can use the loaded data at a later time with my newBitmapIntance() function, it says that regState is null. I'm lost as to why this is the case, since it works flawlessly to create an instance of itself in my loadContent() function. Any way I can successfully hold on to my loaded bitmapdata for later use?
My class so far for reference:
Code:
package{
import flash.display.MovieClip;
import flash.events.Event;
[Code].....
View 4 Replies
Dec 1, 2010
I have created a SWF file that plays/stops sound. The SWF file works great when previewed in Flash CS4, but does not work when inserted in the HTML file.Here are the 2 files that are automatically generated when I INSERT>MEDIA>SWF in Dreamweaver CS4:
swfobject_modified.js
expressInstall.swf
Here is the ActionScript3 that I am using in the Flash file:
[code].......
View 6 Replies
Dec 14, 2005
I have an html page with an .swf in it.when this page loads, i want it to play a certain section in my swf (which I have labelled).Is there a way for me to do this? using javascript?i.e. <body onload=( gotoandPlay (starthere) )
View 1 Replies
May 2, 2010
I have just finished tweeking my html page setting the width and height to 100% so that it appears in the same place on every screen. It seemed successful until i click on a page with an externally loaded swf.URL...i am unsure wether this is an html problem or as3. I have already set the dimensions of the external swfs in flash using:[code]
View 3 Replies
Jul 12, 2010
I'm trying to put together a flash portfolio which contains a page with multiple swf files loaded externally, I've managed to follow a tut and works fine..except,
the loaded swf video loop, and as I navigate to other pages the sound plays through. I tried the unloadAndStop technique which helped but didnt stop the loop, i even added a
[Code].....
View 0 Replies
Jun 25, 2009
I have an animated logo swf file that loads and runs once on the home page every time the page loads. The logo has been updated to appear in three different colour schemes. I want one scheme to load and when the page is refreshed or revisited, one of the other colour schemes to load in its place. They can appear in any random order, just a different one to the one that played before reloading.Can someone point me to an answer or tell me how to do it? I have found a way in JavaScript but this only works on plain images, not swf files.
View 6 Replies
Aug 24, 2011
I am having an issue with a class I'm working on. I currently load an image as a bitmap and store its data into regState:BitmapData so that I may make new instances of that image later on. When I test if I can use the loaded data at a later time with my newBitmapIntance() function, it says that regState is null. I'm lost as to why this is the case, since it works flawlessly to create an instance of itself in my loadContent() function.
Class so far For reference:
package {
import flash.display.MovieClip;
[code].....
View 1 Replies
Jun 9, 2010
I am using actionscript 3.0. My externally loaded swf are not showing after I published HTML or if I try to view my final swf by clicking on it in my project folder. I am not sure what to do because everything is working fine when I have my .fla open and press ctrl enter to view my work.
var defaultSWF:URLRequest = new URLRequest("myswf.swf");var loader:Loader = new Loader();
loader.load(defaultSWF);
loader.x=Xpos;loader.y=Ypos;addChild(loader);
// Btns functionfunction btnClick(event:MouseEvent):void {
[Code] .....
View 2 Replies
Sep 22, 2009
I am using Flash CS4, I have been looking for a tutorial out there about full screen mode, but haven't find one, what want is something like this: http:[url].....I want the website, in html page to fit the screen as soon as the site loads, in, I mean as soon as the user enter the address in the browser, I want the sire to fit the screen like the URL provided above,
View 2 Replies
Sep 15, 2009
So I'm wanting to create a DocumentClass that is willing to accept a variable for a path to an XML file, passed in from the HTML, like thisindex.HTML page would have this: mySWF.swf?xmlPath=xml/xmlFileName.xmlIn the FLA (SWF) I would have only a DocumentClass load a .AS file.In the .AS File I need to accept or read the paramater being passed in from the HTML page.
View 4 Replies
Mar 31, 2011
I was wondering what is everyone's experience are on why a network request would work in FlashCS5 and in a browser locally but when i post it online it fails.The survivorId is sent from the string query. Both tests were done calling a network database.I've tried the following:Outputing the survivorId in a text field and seeing if the parameter variables were being sent correctly.Set the "Networking Only" option in the publish settings.Also is there a way to output trace actions from browsers for more in depth debugging?*EDIT: I have recreated the bug locally in a browser. Without trace actions i don't know if i can figure it out.*EDIT2: That bug only showed up because its from localhost (Apolligies, this is just wierd)Heres My Code, There is the "Stage" then it goes "localSurvivor"(movieClip) then in side that localSurvivor movieclip the "lPlayer" class is addChild() to localSurvivor MovieClipStage-> localSurivor-> lPlayer(survivorId);On the stage is this code:
//Set localP Id
var survId:Number = root.loaderInfo.parameters.sId;
//Object(root).informationTxt.text = survId;
[code].....
View 2 Replies
Dec 21, 2002
So, I have some HTML text loaded from a text file into a dynamic text field and I'm using an embedded font to display that text.
What I would like is to get that embedded font to show the italic tagg or underline, etc... the manual say they are supported and they do work when I don't embed a font but use a standard "arial" or whatever... When I use the embedded font, the HTML tags don't work anymore, besides the one to make links... I can understand why the italic or bold don't work since I did not embed those ones and I don't see how I could assign 3 fonts to the same text field anyway... But I thought the color or underligned would work... Anyway, when I embed the fonts, I get all kind of strange buggy behaviors (like, sometimes the text doesn't wrap inside the text field box even though it's specified in the actionscript style defnition, but sometimes it does...)Is there a way to embed fonts, not within flash, but within the HTML text itself? I mean, is there a technology that allows HTML document to display fonts that are on the server's computer instead of the computer viewing the page? So I could bypass Flash embedding the font for the HTML alltogether.
View 4 Replies
Sep 28, 2011
I have a main.swf file. In first frame i load a background slideshow with this code:
[Code]...
My problem is that when the site loads the 1st time and click from the menu to go to the 2nd frame (1st content page) then i have to wait at about 3-4 seconds to load my html content. The same for the 3rd frame. If these two content pages load for the 1st time, then the pages open immediately. What can i do for this? Is there a way to open this content pages more quickly, or place a loader, and with what code?
View 3 Replies
