ActionScript 3.0 :: Keeping Movie Clip Button On Down Frame?
Oct 5, 2009
I have a sub menu with two movie clip buttons, let's call them mc1 and mc2. They both have a MOUSE_OVER event and a MOUSE_OUT event that work correctly. I'm trying to get them so that if mc1 is clicked then it will stay at the "over" frame and if mc2 is clicked mc1 will revert back to the "out" frame while the second will stay on its "over" frame.What seems to be happening in my code is that the MOUSE_OUT event is overriding the MOUSE_DOWN event. So, when I take the mouse off after I've clicked mc1 the over state goes away.I've tried many of my own failed ideas and search the internet for hours trying to figure this out.Here's my code thus far:
import flash.events.MouseEvent;
import flash.display.*
addEventListener(MouseEvent.MOUSE_OVER, mc1_over);[code].....
View 5 Replies
Similar Posts:
Feb 23, 2010
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
View 9 Replies
Jan 7, 2009
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
View 12 Replies
Jun 2, 2011
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 Replies
Sep 8, 2009
I have a Movie Clip that has 4 pictures on 4 frames.There is also a stop(); action after each picture. What I'm trying to do is have a button that is right below the movie clip and when clicked, it goes to the next picture in the series. How can I do this?
View 1 Replies
Apr 16, 2011
I have a dial that can be rotated and scrolls between 40 and 210. At the moment, this works all the time. Is there a way of getting this to work only when a button remains depressed?
I've set up a movie clip containing a button that jumps to frame two when pressed, and back to frame one when pressed again. SO the dial needs to work when the movie clip (containing the button) is stopped on frame two, but not on frame 1.
View 7 Replies
Sep 9, 2009
How do I insert a start button on the first frame of a movie clip that will then disappear after the movie starts playing?
View 2 Replies
Dec 16, 2011
I have several website pages set up on different frames inside the content (which is a movieclip) of the home page - which is on frame 1 of the main timeline. The content movieclip name is contentMc.
My About page is at frame 10. There is a button on this page (called btnAbout_contactpg) that I want to make jump to my Contact page (frame 50) - all of which is nested under the main contentMc movieclip.
This is the pathway on my contentMc (where all of my pages are located), just in case that doesn't make sense: [URL]
I have looked at several different instructions online, but none of them seem to work.
EDIT:
I am also trying to get a button on my gallery page to load an external image, but it is not recognizing where the button is either:
btnGallery_1.addEventListener (MouseEvent.CLICK, showPic1);
function showPic1 (e:MouseEvent) {
var target:Object=e.target;
var parent=target.parent;
my_loader.load(new URLRequest("image-0.jpg"));
}
View 1 Replies
Jun 18, 2010
I wanted to know how to link Button within a movie clip linking to Frame Label?I am using Action-script 3.0
I am trying to use the following AS inside the movie clip from where i want to go to the other frame labeled as advt_sms but i am not able to go to that page [code]...
View 2 Replies
Dec 22, 2007
I started working actionscript 2 yesterday for a uni project. I was wondering if I can target a movie clip on a different frame from the scripted button. For instance would:
//
_root.my_mc._width
//
return defined if my_mc was on a different frame?
View 2 Replies
Apr 28, 2002
I have a dynamic text box and a movie clip with a button in it in the same frame. What I want to happen is when you click the button, it will add 1 to the text box. (when I say 'Add one' I mean if the text box says 5, after pushing the button, it will equal 6). I hope people understand what I mean, if not, ill try to explain it better.
View 14 Replies
Jul 2, 2009
can a button on a single frame be coded to both display a movie clip on its first click and, after a second click, hide the movie clip?
View 3 Replies
Jan 29, 2012
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
View 3 Replies
Jun 18, 2010
I wanted to know how to link Button within a movie clip linking to Frame Label?I am using Action-script 3.0
I am trying to use the following AS inside the movie clip from where i want to go to the other frame labeled as advt_sms but i am not able to go to that page[code]...
View 2 Replies
Nov 17, 2010
I am developing a multiple choice question answer. I have a movie clip in frame 2 where the radio buttons and question choices are displayed.I am trying to define a event for the radio button in the movie clip's first frame. But i show questions in random order. Say for example the first question to show is fifth I move the movieclip to 5th frame. The event is not firing since it is declared in the first frame.Should i place the button event code in each and every single frame or is there anyother option for this.
View 0 Replies
Feb 10, 2011
i am doing a simple project in which i have 2 frames in the main time line and a movieclip in the first frame and a button.i have something else in the second frame.when i click the button the movieclip should start after it ends the timeline should move to second frame and stop.
View 7 Replies
Jun 12, 2011
I want to do something like gotoAndPlay(frame label) for a movie clip with the instance name content. I am using an array for my buttons placing multiple instances of the button mc on the stage. When I add content.gotoAndPlay I get an access of undefined property error. If I add it inside the parenthesis I get an expecting identifier before my frame label name error.
[Code]....
View 2 Replies
Apr 22, 2009
I've got a basic little slide show player which is timeline-based, rolling through 5 images with alpha transitions, and on the topmost layer, I have 5 invisible movie clips which have actions applied to them as follows:
on (press) { gotoAndPlay(21);}
This action should allow for the on click button to navigate to that specific frame, or image, but for some reason it is not working.
View 2 Replies
Nov 23, 2009
is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
View 1 Replies
Dec 10, 2009
Flash CS4/Actionscript 3 I am trying to create a section for a site where mousing over a button will play a certain frame of a movie clip, which is sitting next to the button. Mousing over different buttons will play (and stop) different frames in the movie clip.
View 1 Replies
Apr 21, 2009
I have created a movie clip button but am stuck with the actionscript. I have created the rollover and rollout for this movie clip button but i want it to do 2 things after this i want it to go and stop on the first frame of a movieclip which has my content on it called portfoliogallery_mc (which is also the same instance name for it) when you then click the button i want it to go and play frame 11 of that movie clip portfolio gallery_mc. Here is my current actionscript i HAVE Flash 8 on my comp that i am currently using. Please note my actions are on a layer called actions and not on the movieclip button itself. nxtimagetwo_mc (is the movie clip button/instance of mc)
[Code]...
View 5 Replies
May 18, 2010
I want to link a button in my main timeline to a label- frame in a movie clip. The movie clip is called "Adetail" and the label is "on01"... I type in the following script
[Code]...
View 1 Replies
Aug 2, 2008
I'm making a VERY basic Jeopardy game, and I need buttons to be disabled after being clicked on once.
Oh, and I'm working in CS3, but I'm using AS 1&2 because that's what I learned... I have no idea how to use AS 3...
example: frame 1 has btn11 in it. btn11 when clicked takes the person to frame 2. when done with frame 2, they click on return.
the return button (btnReturn1) has the following AS
on (release) {
gotoAndStop ("Round1",1)
btn11.enabled=false;
}
the problem is that it works at first - the button disables when I get back to frame 1, but the next time I click a different button then return to frame 1, the first button I disabled isn't disabled anymore.
my actionscript so that my disabled buttons stay that way no matter how many times I come and go from the frame? or if you have a better way to do it, that'd be great. basically, it's like the jeopardy screen, and after "songs" for 200 is clicked, I don't want it to be clickable again at all.
View 1 Replies
Jun 30, 2009
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 Replies
Jun 28, 2010
Scene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
View 2 Replies
Feb 21, 2010
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
View 0 Replies
Aug 18, 2011
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Replies
Mar 26, 2004
i have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
View 5 Replies
Apr 30, 2009
is it possible to link a frame inside a movie clip from main time line?
View 4 Replies
Jun 30, 2011
i'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 Replies
