I know this has probably asked a lot before, but I tried searching some and couldn't find it.
When I make a loading bar it won't show up until the whole game's loaded.
how can i change this as3 code with hex editing to make this game always show HEADs (or tail ) and be winner its game to bet and u should choose head or tail , and if u guess rite u get money ,if not u lost money i want to always answer be head( or tail) .as file attached.
[Code].....
I mean youtube or any other streaming video site, but I've seen it on Youtube. There are times that the loaded bar shows that more than enough video stream has been loaded so the player could play it but it suddenly pauses and shows the loading icon?
View 2 Repliesi am loading external swfs, none too large 300-500k each, and would like to have a pre-loader appear while the files are loading BUT.... if they are already cached... to NOT appear.I've been using a pretty low-fi approach. My pre-loader has a "buffer" of about 20 frames before it transitions to "LOADING..." If the swf has not loaded it will run the 20 frames and then show "LOADING". But if the file is in the cache, it will simply cancel the onEnterFrame and send the pre-loader back to frame 1.I feel like there must be a better, more robust way to handle this conditional.Here's the code I've been using:
page_loader.gotoAndPlay(2);
scope["holder"+ln].onEnterFrame = function(){
bl = scope["holder"+ln].clip.getBytesLoaded();[code]....
I want to make a preloader, and I know how to make basic ones (where a rectangle gets bigger as the amount of loaded content increases), but I would like a little more complicated one, like this: I have 20 letters in my website title, and when you go to my website you don't see anything, but as it loads, for every 5% loaded, a letter will blur in.
View 6 RepliesI was trying to make a game, and the character inside the game could swim. However, I only wanted him to swim in short bursts that refueled every time he hit the ground.
View 9 Replieshow to make a game tutorial as farmville game tutorial to teach the user to play the game. i have recently involve in make that kind of game tutorial for its user by actionscript 3
View 1 RepliesIm working on a project that has a main swf file associated with the document class. It loads XML that provides the text content for the project, then it loads a swf that contains a font in its library, then it loads the first of several content module swfs. When the font swf has inited, I'm registering its library font with Font.registerFont(), and using it in a TextFormat object. After everything is done, I can add code to the document class to create a text field on the stage of the main swf and format it successfully with the TextFormat object, but when I try to do the same thing inside the loaded content module swf, the text doesn't show up there at all.
View 1 RepliesI'm working on a project that has a main swf file associated with the document class. It loads XML that provides the text content for the project, then it loads a swf that contains a font in its library, then it loads the first of several content module swfs. When the font swf has inited, I'm registering its library font with Font.registerFont(), and using it in a TextFormat object. After everything is done, I can add code to the document class to create a text field on the stage of the main swf and format it successfully with the TextFormat object, but when I try to do the same thing inside the loaded content module swf, the text doesn't show up there at all.
View 7 RepliesI need to create a score board for a game show at work for staff. The score board must keep score on the left and right parts of the screen. score must start as default on 0. Then every time I press for example the left arrow key the left score must increase by the value of 1 and when I press the right arrow key the left score must decrease by 1.Same goes for the right score only with differant keys example up and down keys. This sounds very simple and I managed to get it to work when I tested with only 1 score, but failed when adding the second score to the picture.
View 5 RepliesI've developed a game that records how long it took to complete the game. At the end of the game it shows the user how long it too to complete. I want to be able display message to the user depending on how quickly they took to complete the game. I have set up a dynamic text box called "message" that will display the message, but I am struggling to figure out the syntax for :
If gametime is less than 60 secs then message = "well done thats very quick"
If gametime is between 60 and 80 secs then message = "Not bad at all"
If gametime is between 81 and 100 secs then message = "Its good but not good enough"
If gametime is between 101 and 120 secs then message = "You can do better than that!"
If gametime is between 121 and 140 secs then message = "Too slow, you need to practice"
If gametime is greater than 140 then message = "Did you fall asleep?"
I have a game with multiple levels, which is working as I want it to. I would like to add just one extra bit of functionality. As each level starts, I would like a movieclip to play and then disappear after a second or so. The movieclip will just say "level 1", "level 2" etc, without any interaction. Ideally it will appear as the level loads, and then fade out to disappear.
View 2 RepliesI'm doing a game like whack a mole but I'll do it as easy as I can. I'll use only mouse to click on the object, then get 1 point. And I want the object/figure show up by random and then disappear like whack a mole. I could make it shows up and then disappear but my problem is I can't stop it and I don't know what function I should use for counting point when I click on the object.
View 1 Repliesi want to make the character in my flash game make a jump when the player presses a key,e.g. 'space',even the player release the key instantly,the character will still finish the complete jump process.
View 1 RepliesWhen game page loading , the flash game itself does not appear ( just white area as the holder of the flash game) untill the game almost finish downloading, then it appears .. This long waiting with just white area makes visitors leave, thinking there was nothing there.
View 1 RepliesI have a button that triggers the function addToBet on a card game and doesn't allow the textfileds to show any larger number but I can't top the clips with the coins I'm trying to attach. The function showBet keeps running.
bet = 1;
function addToBet() {
bet ++;
[code]....
I have my main movie, and from there an external movie is loaded which has a scrollpane on it. Problem is the preloader will not show when the external swf is loaded...when the button is clicked, nothing happens for about 3 seconds and then eventually the scrollpane comes up. I have the preloader on Scene 2, and it works for all my other external swfs so I know its the scrollpane issue.[code]I have tried have the "export to first" frame linkage thing but that doesnt work... does anyone know how best to do this?
View 2 RepliesI'm creating a tutorial with voice over and the voice over is an mp3 file and I've checked the 'Export in First Frame' option... and every thing works perfect... on my local machine...Where as when I access the files on the web.. my preloader does not show up until 90% loaded... and thats because of 'Export in First Frame'
View 3 RepliesI followed this tutorial on here for making a reusable actionscript preloader (link: http://www.kirupa.com/developer/acte...cliploader.htm). Works fine when loading a .jpg, but when attempting to load a .swf it doesn't work. It says it's loaded, but the .swf doesn't play!!! In fact, the .swf doesn't even show up!!! Is there some code I need to add to make a .swf play when loaded? Here's the code which went into a frame in the actions layer. It's the exact same code as in the source example for the tutorial, I just chopped out the buttons part of the code, and the fade in part and replaced the jpg URL, with my .swf URL. Sorry if it's really simple, I'm not an expert at AS.
[Code]...
I am making a page where the owner of the website can upload an image and it will show the images uploaded on the page. I've got an upload system, it uploads the image to a folder. PHP sends the locations of the images to AS3.
The string AS3 is getting from PHP is:
Code: .....
I also have a variable counting the amount of images in the folder and flash is receiving that one too. How do I show the images on the page? I know how to show them on the page but I have to make variables myself etc and I want it to do it automatically. I've got this already:
Code:
var Times:Number = 0;
var loc:String;
var loc1:String;
var loc2:String;
function onComplete4 (event:Event):void{
[Code] .....
I am loading an external .swf into a container movieClip & using movieClipLoader to preload the .swf. The my progress bar works, but when it reaches 100%, it doesn't show the loaded .swf.
source files:
johnstrawserjr.com/main_movie.fla
johnstrawserjr.com/index2.fla
[Code].....
I have been looking for a way to show a preloader before the external SWF file loaded but unfortunately I had no luck as of yet!!I have a button that loads a few external files in some empty MCs. I just want to show a small preloader before the external SWF files loaded?
View 1 RepliesI've created an AS2 3D carousel It loads text values in the "content" section of the code below - including numbers and special characters into the .swf but.What I can't figure out, is how to get it so that the "Tooltip" loads the text into the movieclip, but can also have numeric and special characters in it.For example, I need the title of one of the icons on this carousel to be "3D Images," but only the "D Images" shows up from the XML text for the tooltip. The content when a user clicks on the icon can include numbers, just not the titles for some reason.I think it has something to do with the way that my text is loaded from the xml document specifically for the tooltip and tipText for the movie clip. Can numeric values be loaded into a movie clip in AS2.
import mx.utils.Delegate;import mx.transitions.Tween;import mx.transitions.easing.*;
var numOfItems:Number;var radiusX:Number = 300;var radiusY:Number = 75;var centerX:Number = Stage.width / 2;var centerY:Number = Stage.height / 2;var speed:Number = 0.05;var
[code].....
I made a movie with 3 slide shows on Level_0. Those slideshows are .swf files that are loaded into blank movie clips on the stage. Each .swf that is loaded into the file is a dynamically loaded .jpg slide show. Everything is working great, except that I want the 3 slide shows to pause when the user presses a button.
View 1 Replies[CS3 AS2]. I'm having trouble preloading a site I'm working on. I think I'm doing it correctly but the preloader page dosen't show up until its done loading. Then jumps straight to the 2nd frame because its loaded. I'm just doing a simple animation on frame 1 (as the preloader anim.) then when its finished loading, goToAndPlay frame 2.
Code:
total = _root.getBytesTotal();
loaded = _root.getBytesLoaded();
if (loaded == total) {
_root.gotoAndPlay(2);
}
I am trying to make small games which will be displayed one after the another in sequence in a master flash movie. each game needs some external parameters like game.swf?para1=111¶2=222 Now I dont like that method because browser will redownload the whole game when parameter changes. So I am loading the movie by :
[Code]...
On the very first frame in my .swf I have over 3.000 lines of code, mostly just a bunch of functions and variables.
I'm closing in to the completion of my game and I'm about to setup a preloader. However, I was wondering, how will all that code affect the preloader when the game is being loaded in a browser?
Will it cause a slight performance issue at the beginning or should I setup all that code on an empty frame right after the preloader?
I'm trying to figure out the best code to limit the number of photos loaded into my slide show. Say I want to limit it to 50 pictures. I'm loading pictures into an array and want to stop at 50. Below part of the code.
ActionScript Code:
// this frame is for loading pictures into an array
noPics.visible = false;
[code].....
I'm running into an error 1009 on a script that I've been working on. What I'm trying to do is attach a preloader Movie Clip that I have in my library with a class name of preloader, to an empty Movie Clip called preloaderMC and position that on a set of loaded thumbnail images. I can get the code to show one preloader and it will track the total of all the images being loaded, not single images. Ideally, I'd like the preloaders to show the amount loaded for each image and then disappear.
View 5 Repliesi loadMovie()'ed a jpeg file into an empty movie clip. after that i traced the width of the cilp and its showing zero.. how is that possible?? i need to get the value of the width of that jpeg picture to adjust its positioning. how do i get it?
View 8 Replies
