ActionScript 3.0 :: Make Others Invisible / Turn Them Visible Only When Use With MouseOver Event
Aug 15, 2009
I am creating a thumnail bar having the thumnail of the images, it has the default visible thumbs of 7 images, while the others must be hidden on the right of the bar. I used the code in AS3 to add thumbs in to the bar, the first 7 were fine, but the others still appearred visible and cover the bar border.My thumbBar is simply a rectangle and what i really did was to thumbBar.addChild(thumb). But all the thumbs appeared visible, first 7 thumbs stayed inside the rectange but the others were outside.How can I make the others invisible and turn them visible only when i use with the MouseOver Event.
View 3 Replies
Similar Posts:
Jun 23, 2010
I am adding a swf to my website with a streaming flv player and I would like to make the buffer mc invisible until the invisible button covering the video player is moused over. I would like the net stream to begin when the page loads, but for the video to begin when the player is moused-over, and then pause when moused-off, right now the buffer is showing on page load and the animation is really distracting.
This is the code I am working with:
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://rtmphost.com/banner/");
var ns:NetStream = new NetStream(nc);
[Code].....
View 1 Replies
Mar 21, 2010
I want a movie clip to be visible for 3 seconds then invisible then visible again after 3 seconds.
View 4 Replies
Jul 28, 2010
I have a map of states state when a particular state is clicked on, the fla centers on and zooms to that state. When you click on a state a unique ID is pulled from an xml. Using this ID, I can then call all the counties that are part of this state through the county's xml which is also loaded on my stage.or example if I click on Arizona, it zooms and I get a trace of all the instance names of the counties within Arizona.
//call all instance names of Arizona counties
cldcnfips=(cntXml.Records.Record.(STATE_FIPS==cldstfips).afips.children());
trace(cldcnfips);
[code]......
View 7 Replies
Oct 23, 2009
I have a file where everything is on frame one, and I have a nav bar. I want there to be a couple of buttons showing up below the main nav bar when one nav button is clicked, then disappearing when any of the other buttons are clicked.
View 1 Replies
May 5, 2011
I have a flash and want to make it only visible when loading 100%. In frame 1 I write stage.visible = fault; or this.visible=fault;
it doesn't work ! the flash still display !
View 7 Replies
Oct 11, 2010
If there an object is placed on the stage named square and with the document class Main an object was added to square with addchild,if I wanted the square to not be visible but still be the parent while the new object added to square was made visible, how would you accomplish that?
My Trials: It seems if you set the parent to false visibility and then try to set the child visibility to true it disregards that request because the parent visibility overrides it, so the entire movieclip object remains completely invisible.It seems you can make a child become invisible while the parent is visible, but I want to do the opposite.
View 6 Replies
Mar 1, 2010
I have a simple FLA that pans through an image up/down/left/right. There are several hotspots (transparent buttons) that popup simple captions when the user rolls over them and launches a URL when clicked.
The captions are actually one caption that I dynamically write text to, size, and _x, _y locate when the rollover event occurs.
The caption (cap) is a rectangle and text box MC symbol which is grouped with the graphic and buttons as another MC symbol. It all works great, panning, captions.
The problem is, when the mouse is first moved, the caption box appears over the graphic. I want it invisible until a rollover occurs. I have tried a setup function action in the first frame that performs cap._visible = false;, which did not solve it. That syntax works fine following the first rollout.
on (rollOver) {
cap.desc.text = "Mr Reynolds";
cap._width = 7*cap.desc.text.length;
[Code].....
View 8 Replies
Oct 18, 2010
This is a very simple thing I want to do: show informational popups when an area of the screen is rolled over. I was able to get this working in action script 3 with MouseEventListener and the visible =true/false property but can't seem to get it working correctly in AS2.
View 2 Replies
Apr 11, 2005
I'm sure this question has been discussed before? I'm wondering how I can make this particular scrollbar invisible when the text inside is short and visible when the text is longer? What would be the AS for this? I'll attach my file to this post!!
View 2 Replies
Apr 11, 2005
how I can make this particular scrollbar invisible when the text inside is short and visible when the text is longer?
View 3 Replies
Nov 24, 2011
I'm making an interactive book and I would like to make my "Text"-layer invisible when I start the "Turn Page"-animation. It's either that, or I'm gonna have to put a code for EVERY 23 MoveClips with the Texts in them, since I'm using the same "Turn Page"-button.
View 2 Replies
Jun 22, 2009
I need to show different custom pointer when mouseover 2 different invisible buttons. These are next and back buttons which cover the entire left and right part of the stage. How this can be done in as3? Or is there a better way of doing it? I checked out the import flash.ui adobe live doc but can't quite make head and tail of it. I guess the example shown is only to change to custom cursor for entire stage.
View 4 Replies
Dec 30, 2009
how to make a clip invisible after 4 seconds of idle.
View 16 Replies
Nov 12, 2006
well i m here to ask a "simple" doubdt i think, i wanna duplica a movieClip and acess it in diferent X positons, and how can i put my mc visible in some frames and invisble in others? i ve tryed mc.visible = false but it didnt work :S
View 1 Replies
May 26, 2008
I have got some images that i have loaded flash from another website.
i have used the tween function to make it move about. i would like to know if there is a way to have many images in the same symbol and change there visiblility so that you can only see one at a time. when i use
Code:
_root.images.image1._visible = false
_root.images.images2._visible = true
[Code].....
View 1 Replies
Mar 27, 2009
This may well just be because it can't be done but here goes.Does anyone know of a way that I can make a MoviecClip "visible=false" whilst stopping just one of its children's, children's, children...etc from also going invisible.I am aware that it can be done by setting them all individually but this will take a lot of code (and I like tidy code...and I'm lazy), and I am reluctant to use a loop as it will interrupt the animation that is going on at the time.
View 2 Replies
Jan 3, 2012
Is there anyway a Dispaly Object can make its parent invisble = visible=false,
But the child remains visible?
Just trying to save on re-writing a batch of code so its the normal parent child relationship.
View 3 Replies
Jan 2, 2010
I want to make two custom cursors. One to be visible on rollover and second visible only on mouse down. Is this possible. I want to make game where cursor changes into mc1 and moves around with mouse but when you click mc1 is changing to mc2. Till now i managed to hide cursor, make mc1 to move with cursor but dont have any idea how to change mc1 with mc2 on mouse down and then mc1 to come back on release. Is there any other way to make this, my idea was to make 2 clips to follow cursors and use as to determine when each clip is visible, but it doesn't work.
View 4 Replies
Oct 27, 2010
I'm working on a game where if the person puts there mouse over a card, it should pop out over the other cards, and when moved off, the card should go back to where it was, i can get the card to pop out no problem, and go back to it's location, the thing is, i don't want the card to go back when i move off the entire image, only when the mouse moves off of what was originally visible, and i'm not certain how to obtain a pre-visible area that i can use to test if the object should still be over all the other cards.
View 5 Replies
Sep 15, 2011
how can i make MC visible for 20 seconds when a button is pressed i tryd to do this and this is what happend
when i first press the button it works perfectly but when i press the button the seccond time the MC doesnt turn visible can someon give me a sample how to do this?
View 3 Replies
Sep 29, 2011
I have a movie clip named circle_mc(see the image on the link below) and a mask object(movie clip) which determines visible area of the circle. User can change the portion which is visible (extend the red area and make it red+blue, gray area is invisible). I need to find proportion of visible area to invisible area (red+blue/gray) so that I can calculate angle.
View 1 Replies
Aug 3, 2009
Is there any ways to set a movie clip(item2) invisible but set another movie clip which located inside item2 visible?
View 1 Replies
Jul 20, 2009
I'm using a MOUSE_OVER event to display an invisible movieclip...so when user hovers mouse over movieclip it tweens from 0 alpha to 1 alpha. However, I'm having problems with it. The movieclip is a MusicPlayer, which contains other movie clips within it. When I move the mouse over the music player's background it appears....I then move the mouse over the Play button and briefly the MusicPlayer disappears then reappears. This happens every time I move the mouse to different elements of the MusicPlayer? It quickly flashes invisible, then becomes visible again and its a pretty annoying effect.
Are there any alternatives to the MOUSE_OVER event? I was thinking about maybe drawing a rectangle that covered the area of the music player but was separate to the music player, so whenever the mouse was within the rectangle's x and y coordinates the MusicPlayer would become visible.
View 3 Replies
Oct 23, 2008
I'v created a video. It has 4 layers. An image on each. the page is the same size as the images(all images are the same size). i've added motion to them so the pics move from top to bottom, no gaps in between. thats it. what i want is for the clip to only move when the mouse is placed over the clip, otherwise it shouldn't move.
View 1 Replies
Apr 18, 2011
Two buttons, left and right, move the (full screen) backgrounds. If you click the right arrow, the current background moves left, the new background is added to the right, is also moved left, and the old background is faded out. Think of it as a long stream of backgrounds, being moved back and forth with the previously viewed one being faded out with a tween.
The problem is that the arrows appear too soon, and clicking one breaks the whole thing. Main.as adds the arrows & adds the event listeners which then call the functions. The Main.as functions to move the backgrounds use background.moveLeft(); in the backgrounds class, which is where the fade out tweens happen.
So - how do I turn OFF the buttons (added in Main.as) when the tween (in background.as) has finished? I've tried using something like "getNextRoom.addEventListener(TweenEvent.MOTION_FIN ISH, turnOff);" with turnOff referencing the arrows, but it complains that they don't exist (and in the backgrounds class they don't).
View 11 Replies
Feb 20, 2009
I have a MovieClip of an bicycle, and I've attached and event listener for mouse clicks on that movieclip. The mouse clicks events are raised when I click on the bike, but I really want to be able to click somewhere in the entire region of the movieclip's rect (to make it easier for the audience this is for to be able to click).
View 1 Replies
Nov 12, 2009
How can I create Mouseover event for a checkbox. Where if I put mouse over a checkbox it should display some text.
View 3 Replies
Mar 6, 2010
Ref: spark.components.ButtonBar. In the spark ButtonBar's mouseOver event, how do you determine which of the several buttons the mouse is hovering over? There is, of course, no selected index at this juncture. If it makes a difference, my ButtonBar is not defined in MXML but is instantiated in ActionScript and an ArrayList is assigned to the dataProvider property of my ButtonBar instance.
View 2 Replies
Dec 27, 2011
I have a actionscript "Sprite" class which load a transparent png. When i set a "mouseover" event over the Script, it is throw when the mouse goes over the "square" containing the transparent png. I would like a glow effect to be displayed on mouseover, but only when the mouse is on the displayable part of my transparent .png. How can i do to throw the event only when the mouse is not over the transparent part of the png? Do i have to check by myself in the mouseover handler then do what i have to do?
View 2 Replies
