I have some trouble with pausing and then resuming sounds in as3.
[Code]....
Pausing goes fine, however when I resume the song again, the sound starts playing a few seconds before I actually paused (so parts of the sound repeats itself). This is really annoying.
I've been making a short movie. It contains some tweens (both shape and motion). I want the movie to automaticly pause at a specific moment (which bisects multiple tweens) and for a button to appear to contine the movie
View 5 RepliesI've been making a short movie. It contains some tweens (both shape and motion). I want the movie to automaticly pause at a specific moment (which bisects multiple tweens) and for a button to appear to contine the movie. I am completly new to flash and will have to have everything spoon fed to me.
View 1 RepliesSo my program starts playing and my background music starts to play and loops...
Actionscript Code:
mySoundChannel = mySound.play(0, int.MAX_VALUE);
but i'd like to be able to pause the background music and then continue looping. this is what i'm doing now after i've stopped the song and acquired it's current position, and am ready to play again...
Actionscript Code:
mySoundChannel = mySound.play(resumePosition, int.MAX_VALUE);
problem is that when it loops, it loops back to the resumePosition (as expected since that's when we told it to start playing from). so how to i resume AND loop starting over at the beginning of the song?
I haven't found this one yet, plenty about pausing sound, but I have sound loaded into a movie clip so:
Code:
Intro1 = new Sound (soundLoader);
Intro1.loadSound("SndIntro1.mp3", true);
I'd like to get a pause button to stop the animation, get the position of the sound, stop it also, and then clicking the play button will start the animation, and also the sound from the same position it was stopped (in other words resume the sound). Here's my script for the pause button, it's stopping the animation, but still not the sound:
Code:
on (release) {
pauseTime = Intro1_sound.position;
Intro1_sound.stop();
stop();
}
I'm having problems with pausing and resuming a background sound on one button. I tried some examples from kennybellew.com tutorials, but it just wont work for me.I have done some button work before (toggling, turning layers on/off etc.), i just never had to deal with sound.
View 9 RepliesI have a movieclip that contains an animation with several soundeffects in it.Now i would like to be able to pause the animation and play it again. Which isn't so hard for the animation itself but it is for the sound.
View 0 RepliesI have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
I am working on a Flash movie that contains sound. I am using the stop ALL sounds to turn off the sound but I am having trouble finding code for Actionscript to resume or even replay the music without interrupting the movie.
View 6 RepliesI followed the mp3player tutorial (part 3) from [URL] and got it working fine. Only problem is that the setVolume I'm trying to use with my music is affecting all my other sounds - button sounds and background sound. I'm aware of the createEmptyMovieClip/attachSound approach and got it working on my other sounds. But Lee's tutorial-mp3player is using a slight different technique, and so my normal approach doesn't quite work.
[Code]....
I want to synchronize sounds perfectly to do a kind of Audio Mixer, using different sounds. [URL] does it perfectly, I've been researching and researching and I just don't know how to do it! How does [URL] synchonize audio so perfectly? you can even change sounds and the new ones will come on time! How do I do that? Is it just Action Script? or something else?
View 1 Repliesbasically, what am doing is that am running a flash file (playing music) in the background of the app using webview, and when I want to stop the music , I just load "about:blank".I want to keep the flash file running (music) when my app gets paused (which works fine so far) the problem is when the app resumes, pressing on pause button launches a new webview instead of changing the link in the previous one and the sound doesn't stop.the only solution I found was to kill the process and restart the app, but that's not practical, any idea of how to still be able to use the same webview when resuming the app ?
Update: guess I wasn't clear enough, I have a webview widget stated as "gone" , I only need the audio form the flash file I'm running in the webview so the "play" button loads a URL that contains the flash file (so the user only hears music, and doesn't notice that I'm using a webview), when I press the back/home button the music doesn't stop (I like it that way) but when I go back and press on play again it loads another url in a new page, you get double music
pause the execution of my code for a set amount of time before resuming?
View 4 RepliesI have a film with 4 scenes in it: Here's a link to the film and as you can see the film does not play the music the second time because of the StopAllSounds function which is probably the wrong code to use. The first scene is just a button with 1 frame, a stop action and a music clip. The second scene is the film. The third scene is the credits fourth scene is a Play again button. I have a Stop all Sounds action on the fourth scene because if I do not use it and I press the Play Again button, the music from the first song keeps playing but also the music from the film starts up again so it starts to play twice. What I want to know is, how do I get the music to stop at the end of the film but start up again once I hit Play Again?
I am using Flash CS3 if that helps and using Actionscript2.
I just met a piece of error log when I was trying to resume the paused mp4 streaming. Here is the log from the server:
[INFO] [NioProcessor-1]
org.red5.io.mp4.impl.MP4Reader - Frame
position was not found for timestamp:
92000
I'm using Red5 newest 0.9.1 final for mac os x to stream the H.264/AAC encoded MP4 file to my flash app.
And there's no problem when I'm resuming the .flv file.
I created a swf which loads multiple external swfs to 100% before playing. Which works fine. If I stop a clip while it's loading, I call loader.close() and I'm able to resume from where I left off at a later time. The problem I'm having is when I added the functionality to load the next clip while the current clip is playing. To be clear, I'll refer to the normal preloader as preloader, and the preloader which loads the next clip as pre-preloader. If the pre-preloader loads to 100%, everything is good. The next clip will play immediately without having to wait. If, however, the pre-preloader for the next clip is stopped at any point before 100%, the preloader will start loading at 0%.
With that being said, If I go back to the previous clip (which was previously already playing), the pre-preloader will pick back up where it left off, then if I go forward again, the preloader will pick up where IT left off.
[Code]...
I have created a simple interactive tutorial with buttons that open specific scenes (sections) in the tutorial using gotoAndPlay(). These scenes are initially "duplicates" of each other, except for some of the objects in the scene. Everything was doing ok but when I reached my 12th scene, things became messed up. Initially, when I added this last scene (say, SCENE2, with the same contents as the one copied from SCENE1) and published it, the SWF was behaving correctly. But when I just extended the timeframe to accomodate a longer audio, this scene keeps on pausing on the last frame for some reason. I'm assuming that if there are no animations and just audio playing, it would still not pause. I copied another scene, say SCENE3, also from SCENE1, that would play after SCENE 2. When I click on the button to play SCENE3, it just goes to the last frame of SCENE2 and does not play, eventhough the script for that button is just gotoAndPlay("SCENE3",1).
View 1 RepliesI have an external .flv and I simply need to be able to pause it with a frame action and start it back up with another frame action.I found some references to "flvStream.play" through google but I haven't been able to properly implement it.
View 3 RepliesI am having a problem restarting a function I have stopped using delete this.onEnterFrame a panel scrolls on the x based on mouse position. here is the code
panel.onRollOver = panelOver;
function panelOver() {
this.onEnterFrame = scrollPanel;[code]....
then on a button click I want the scrolling to stop and be able to be restarted on click from within a child movieclip.
Is there a way of pausing a mc timeline? so when u return its at the same stage where it was paused it ?
View 1 Replieshow to get an animation to pause at a desired frame after a click rather than just stopping it at that exact frame or putting a stop action at the desired frame. My goal is to have a movie sequence play continuesly and when a user so desires he/she can click and stop the movie, but rather than stop it while it is in transition at that exact frame, the movie should continue to a point where it is logical for the movie to stop.(example: the movie is at frame 2 when the user clicks, but instead of stopping at frame 2 it continues to frame 10, and then stops) Then on another click the movie will continue through it's sequence as it was before. I would like to use a MC, onClipEvent to handle the script in Flash MX.
View 4 Repliesi have a modified xml slideshow i previously tried to clear the intervals to pause the show to no avail.
Code:
var id, current;
var k = 0, p = 0;
var slide = 1;
[code]....
ok so I have the webcam in my flash movie,so you see your cam in the frame..but i was wondering if there was a code to pause the stream so you can a 'snapshot' without having to save anywhere or anything too complicated.. just literally pausing then un-pausing
View 3 RepliesI'm new to actionscript and am trying to have a simple three pictures coming in one at a time then some text rotation around them.I have the following code for the pictures coming in from the left but I need to somehow pause between each one as at the moment they all come in together:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var xPosT:Tween = new Tween(runner, "_x", Bounce.easeOut, -700,-175, 2, true);
[code]......
Is there a way of pausing a mc timeline? so when u return its at the same stage where it was paused it ?
View 1 Repliesmy problem pertains to Flash MX and pausing .mp3 files I have loaded externally. I have searched this forum, but every useful thread i found references [URL] but that page gives me and http 500 internal server error... ie the site is down.
but my problem is that I need to know if there is a reletively simple (or actually any at all) way to pause a song through a button that i have externally loaded... this is my code so far:
[AS]
Song = new array("tonight.mp3", "when in doubt.mp3", "hey now.mp3");
bgSound = new Sound(this);
bgSound.loadSound(Song[Math.floor(Math.random()*3)], true);
bgSound.start();
[code]...
It looks a little complicated because i have a volume slider in there, as well as loading songs randomly... but what i need to know is how to get the stopB button to pause the song... and the playB button to resume it... right now stopB just stops the song... and playB loads a new one randomly.
i am making a music player in flashmx but i don't know how to pause the mp3.
View 4 RepliesI'm attaching an MC to the timeline and within that attached MC is a LoadVars.sendAndLoad command. This works flawlessly when I have a few variables but becomes horribly bogged down when I have to send (and receive) lots of data. It actually freezes my swf until all the data is loaded, then switches windows <minimizes itself in Win XP> after it's all done loading.So I figure I need a way for the original attach movie to finish loading, before I send the PHP commands...
View 1 RepliesI am creating I guess what you could call a swf library. It's a bunch of different interactive swfs all packaged up into a main swf that I can embed on my page. Each swf contains flv's that play. They all work great in my main swf and individually, that's not my problem.Everything is working great but I have a menu that pops up to change between different episodes and it works great.BUTWhat I'm looking to do is when you click on the menu button and the menu pops up over the externally loaded swf, I want the externally loaded swf to pause. Then when you close the menu I want it to un pause. It looks really tacky when the menu pops up and the flv's in the externally loaded swfs keep running. I knew how to pause them in as2 but only from the swf they were actually in.
This is my code (this all works) I just can't figure out code to add that will pause everything when the menu pops up ...box is what I named an empty box on stagetop_btn is the button that launches the menu
var myLoader:Loader = new Loader();
var myURL:URLRequest = new URLRequest("NewHarbison2.swf");
myLoader.load(myURL);
[code]....
I'm working on a script and I've run into a coder's writing block so-to-speak. I have an array of twenty object (with attributes). I want to loop through the array and for each object, update some text fields, create a tween, pause, and create another tween (i.e. fade in / fade out). I tried working with the timer class but the for loop, as expected, keeps on rollin' after the function has been called by the listener.
View 10 Replies