I've been making a short movie. It contains some tweens (both shape and motion). I want the movie to automaticly pause at a specific moment (which bisects multiple tweens) and for a button to appear to contine the movie
View 5 RepliesI've been making a short movie. It contains some tweens (both shape and motion). I want the movie to automaticly pause at a specific moment (which bisects multiple tweens) and for a button to appear to contine the movie. I am completly new to flash and will have to have everything spoon fed to me.
View 1 RepliesI have some trouble with pausing and then resuming sounds in as3.
[Code]....
Pausing goes fine, however when I resume the song again, the sound starts playing a few seconds before I actually paused (so parts of the sound repeats itself). This is really annoying.
So my program starts playing and my background music starts to play and loops...
Actionscript Code:
mySoundChannel = mySound.play(0, int.MAX_VALUE);
but i'd like to be able to pause the background music and then continue looping. this is what i'm doing now after i've stopped the song and acquired it's current position, and am ready to play again...
Actionscript Code:
mySoundChannel = mySound.play(resumePosition, int.MAX_VALUE);
problem is that when it loops, it loops back to the resumePosition (as expected since that's when we told it to start playing from). so how to i resume AND loop starting over at the beginning of the song?
I haven't found this one yet, plenty about pausing sound, but I have sound loaded into a movie clip so:
Code:
Intro1 = new Sound (soundLoader);
Intro1.loadSound("SndIntro1.mp3", true);
I'd like to get a pause button to stop the animation, get the position of the sound, stop it also, and then clicking the play button will start the animation, and also the sound from the same position it was stopped (in other words resume the sound). Here's my script for the pause button, it's stopping the animation, but still not the sound:
Code:
on (release) {
pauseTime = Intro1_sound.position;
Intro1_sound.stop();
stop();
}
I'm having problems with pausing and resuming a background sound on one button. I tried some examples from kennybellew.com tutorials, but it just wont work for me.I have done some button work before (toggling, turning layers on/off etc.), i just never had to deal with sound.
View 9 RepliesI have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
I am working on a Flash movie that contains sound. I am using the stop ALL sounds to turn off the sound but I am having trouble finding code for Actionscript to resume or even replay the music without interrupting the movie.
View 6 Repliesbasically, what am doing is that am running a flash file (playing music) in the background of the app using webview, and when I want to stop the music , I just load "about:blank".I want to keep the flash file running (music) when my app gets paused (which works fine so far) the problem is when the app resumes, pressing on pause button launches a new webview instead of changing the link in the previous one and the sound doesn't stop.the only solution I found was to kill the process and restart the app, but that's not practical, any idea of how to still be able to use the same webview when resuming the app ?
Update: guess I wasn't clear enough, I have a webview widget stated as "gone" , I only need the audio form the flash file I'm running in the webview so the "play" button loads a URL that contains the flash file (so the user only hears music, and doesn't notice that I'm using a webview), when I press the back/home button the music doesn't stop (I like it that way) but when I go back and press on play again it loads another url in a new page, you get double music
pause the execution of my code for a set amount of time before resuming?
View 4 RepliesI just met a piece of error log when I was trying to resume the paused mp4 streaming. Here is the log from the server:
[INFO] [NioProcessor-1]
org.red5.io.mp4.impl.MP4Reader - Frame
position was not found for timestamp:
92000
I'm using Red5 newest 0.9.1 final for mac os x to stream the H.264/AAC encoded MP4 file to my flash app.
And there's no problem when I'm resuming the .flv file.
I created a swf which loads multiple external swfs to 100% before playing. Which works fine. If I stop a clip while it's loading, I call loader.close() and I'm able to resume from where I left off at a later time. The problem I'm having is when I added the functionality to load the next clip while the current clip is playing. To be clear, I'll refer to the normal preloader as preloader, and the preloader which loads the next clip as pre-preloader. If the pre-preloader loads to 100%, everything is good. The next clip will play immediately without having to wait. If, however, the pre-preloader for the next clip is stopped at any point before 100%, the preloader will start loading at 0%.
With that being said, If I go back to the previous clip (which was previously already playing), the pre-preloader will pick back up where it left off, then if I go forward again, the preloader will pick up where IT left off.
[Code]...
I've been reading up on GC in AS3, I understand how it works now, and how I should go about things, nullifying all references, weak references, avoiding circular references etc (I tend to have circular references now I think about it).
How does the GC in AS2 work in comparison? How often is GC activated in both environments?
And is performance the reason that the AS3 GC has become less automatic and less frequent?
In AS2 presumably it's having to do far more scans and more frequently, thus being more of an overhead?
How does the delete keyword differ in AS3 compared to AS2? I know many people used null in AS2. I tended to use delete for onEnterFrame events and instances of classes no longer being used, then just remove for movieclips obviously.
I have set up the timer and it counts down correctly.how to get my timer to do an automatic reset once its down to 0.
Quote:
import flash.utils.Timer;
import flash.events.TimerEvent;
/*This creates a new timer object, that fires every 1000 milliseconds (each second), and will fire 10 times after it is started, then stop. Next we will create an event listener that will catch the Timer event, and call a function "changeText".*/
var alienTimer:Timer = new Timer(1000,10)
// declare an integer that starts the timer at 10! this shows the seconds left on the timer
var secondsLeft:int = 10;[code]................
When I instantiate a new object I want the object to automatically be named the same as the name used in the instantiation.var fred:Person=new Person();trace(fred.name); // traces "fred"Is there a reference I can use in the Person constructor to do this?
public class Person extends MovieClip {
public function Person() { name = ??? // what goes here? }}
give me any leads as to the methodology behind a flash feature that senses browser size and sizes itself accordingly.
View 1 RepliesWhy didn't my Flash version change after I invoked the update alert on 08/12/10. I had V 10.1.53.64 and your website shows the latest recommended to be V 10.1.82.76. After the update it shows mine still unchanged.
My system particulars are:
XP SP2 32 bit
IE V6.0.2900 32 bit
My agency would like to handle updates manually rather thenhave users (appox. 1000+ users in one physical location) prompted toupdate the Flash
View 4 RepliesI want to put a number of flash videos on a page so I need to stop them from starting automatically. Is there a way to go into the .html?[code]
View 1 RepliesI'm new to the world of as3. I was wondering if it was at all possible to have the UIloader load my external images with automatic fading transitions . I have searched the internet, and have found a few methods that include xml files, but I was wondering if there was a simpler method that used code that could have the same effect when directed to the source location.
View 5 RepliesI'm having a problem with flash that every time I load my website flash flash plays an automatic preloader (three black cricles flashing) that stays on top of my preloader and I was wondering if there is any way of disabiling it.
View 1 RepliesI need to create a flv file that change automaticaly his dimension if I modify the dimension of the window of the browser. Is that possible? which is the right way to do this? Is there a tutorial?
View 1 RepliesI'm new with actionscript and I have a basic question:
I have a Sprite and an image added to this sprite as a child of it.
Whenever I'm changing the size of the parent Sprite, the image is stretched with the Sprite.
Is there any way to disable this automatic scaling of the children?
i am working in application of twitter in flex 3 and action script 3, this in the text area when the user write my application automatically change http address to a short address but i don't know find the address within the text
View 2 RepliesI have the following scrip below, where I call some images through an XML, and create a gallery that every 3 seconds it moves to left, passing the pictures automatically. But my images are of different sizes in width, the height is the same.
var dados:XML = new XML();
dados.ignoreWhite = true;
dados.load("xml/" + _root.xmlport);
[code]....
In the windows environment I believe it is possible to use UDP broadcast to allow apps to easily communicate without spcifing the IP address.
For example a presentation running on one computer/projector, and then several tablets with a ui to control it. No matter what local wifi (on change of loaction) is used the apps are able to communicate, without any further setup other than joing the network.
How can this be accomplished using TCP (or other method) so that I can keep cross platform and mobile compatibility. Without the need to specify the IP addresses of the device/app?
In my Mobile Project, i have set -> Application Setting -> Automatic reorient = False
Can i make only a certain page able to reorient = True (change from Portrait to Landscape mode).
The one on the right under 'Add To Basket'I dont know where to start and I am a complete noob :-( asically I need it to be the same as that one,For example lets say today is Monday and it is 9pm It should say 1 hour left for delivery on Tuesday... But if it is Monday 10.01pm I need it to say 23hrs 59mins for delivery on WednesdayNow the trickier part is because there is no delivery on Sunday if on a friday night past 10pm I need it to say 47hrs 59mins for delivery on Monday...I hope that makes sense... I managed to find the file they use to process their countdown , but because I am a noob and there is a load of other bumf in the file I dont know what to keep and delete
View 1 Repliesi need to disable automatic url encoding in flash as2 because i have URL link with special characters need to disable all of '%'.
View 0 RepliesI am going to use the automatic slide show that is explained in this site for my dad's website (I've used it in the past and it's great!) and I would like to know if the images can faded out as well as faded in. Basically, I want to have a seemless, progressbar-less, slide show with pictures that fade in and fade out. This is going to be used for a wedding photography site by the way.
View 4 Replies