My code is supposed to read an XML file, and present a question with 4 possible answers to the user. I am outputting my data fine, and even outputting corresponding radioButtons for my multiple choice question. I must be handling my radioButtonGroup incorrectly as when I test my movie, I can select 1, 2, or even all of my buttons. My trace statements outputs each button with the same group name.
[Code]...
I have a set of 6 buttons and upon clicking one of the buttons i want to tween the others that were not clicked to fade out.
View 3 RepliesI'm trying to make a multiplication game, with
123456789 as buttons on the left side
123456789 as buttons on the right side
my goal is to select 4 on the left and 7 on the right, and in the middle to see the result 28. but I don't know how to make 2 buttons to stay selected
if I press 4 on the left, it gets selected properly, and the effects show OK but if I press 7 on right, then 4 deselects, and I'd like 4 and 7 to stand out as selected buttons in the same time
I have some text form fields that I've set up to display some paired variables stored in a .txt file. When the swf loads, the form fields are populated with the text.I've also set it up so that if you change the text and hit a submit button, the .txt file gets updatedI'm now tryng to set it up so that I can store radio button selections in the .txt file too.I've started doing it a certain way, but am wondering if there is a more straightforward way of doing I've set up the butttons to spit out "on" or "off" depending on the selection, and apply that to the variable that gets stored.the text form fields when the swf is refreshed, I want to load the on/off variable, and then somehow apply it to the radio buttons so that one of them is pre-selected.
View 1 RepliesI have a simple game I am attempting to write. random movie clip (from the library) is displayed on the stage from an array of mc's Here's the question. What my game will do, is allow the user to select one of two buttons (red and green) based on the movieclip that is displayed. One will yield a correct result and the other will yield an incorrect result.HOWEVER, depending on the movie clip displayed, sometimes the red button will yield the correct result and sometimes the green button will yield the correct result. I am having trouble figuring out the best logic in writing code to accomplish this.
View 2 RepliesI was wondering, if I had an image with multiple sections that are highlighted on rollover(like a car), and I wanted to give the user an opportunity to select multiple sections and on release they are taken to a page that displays relevant info on each clicked section, how would I go about doing that?
View 2 RepliesI have 5 radiobutton. They have all been grouped into the Groupname HR_value Each of the radio button have the names: hr1 , hr2 and so on.
If I write: _root.line1.vv1.hr1.selected= true I get the result i am looking for. But I know want this to be contingent upon the value of a variable called temp:
var temp
temp=1
_root.hr[temp].selected= true
.....this does unfortunately not work.
I put 2 RadioButton on stage and specify them as belonging to the same group. However, when I export them as a symbol and try to use it in AS3, I can't access that group, only individual buttons? How can I get the group into my symbol too?
View 2 RepliesI have a comboBox and values like basic and advanced. And viewstack container conatains 2 grids.When i select the base option in Combobox, the first grid has to be selected. select the advanced value in comboBox, the second grid has to be selected.
<mx:ViewStack id="viewstack1" width="95%" height="85%" x="0" y="63" >
<tables:KeyMetricsBasicTable basicArrayDataProvider="{basicArrayResult1}" width="100%" height="100%"/>
<tables:KeyMetricsAdvTable advArrayDataProvider="{advArrayResult1}" width="100%" height="100%"/>
</mx:ViewStack>
Flex 4 Combobox is extended with a Text Input that helps in getting to the item that is searched for.I have created a Check Box as an itemrenderer for this Flex 4 Combobox. I would like to Add a Select All and Select None options in the drop down of the Combobox. I know that i could accomplish by editing the dropdownfactory in case of a Flex 3 Combobox. But in Flex 4 the dropdownfactory doesnt exist.
View 2 RepliesI'm making a simple quiz. I dynamically create Sprites and on these Sprites I add dynamically created TextFields which take text from an XML file. The TextFields contain the questions. Now I want to add a RadioButtonGroup to each Sprite but every time I try to addChild I get the message telling me I cant coerce the RadioButtonGroup into a display object.
[Code]...
I have an AC with several questions and assoicated answers. These must be shown in a DG, and the idea is that the rows and colums of the DG are bound to the AC. For example, if the answer to question1 is Yes, the Yes-button must be true, and both the others must be false (as in normal radiobuttongroup behaviour). But when I change a button by clicking it, the actions datafield of the AC should change accordingly. Am I clear enough here?
It is ment for dynamic questionnaires.
<?xml version = "1.0"?>
<mx:Application xmlns:mx = "http://www.adobe.com/2006/mxml">
<mx:Script>
[Code].....
I have a Validator on a RadioButtonGroup of 2 Radios. There's a checkbox above the RadioButtonGroup whereby if checkbox.Selected, then the Radios are enabled. So the Validator is required if the checkbox.Selected. So far so good. The problem is once a radio gets selected, the RadioButtonGroup selectedValue gets set. When I uncheck the checkbox I set the radios to not selected, but the selectedValue on the RadioButtonGroup doesn't get reset -- it hold the previous value. I tried setting it to null but no luck.
Therefore if I check the checkbox again and submit, the Validator see a selectedValue on the RadioButtonGroup. Even though none of the radios are selected, validation passes. How can I reset the RadioButtonGroup to its initial state when I uncheck the CheckBox? I looked at the underlying code for RadioButtonGroup.selectedValue = null, and what it does is look for a radio in the with the parameter value. If it doesn't find it nothing gets set.
EDIT2: Ok Both problems solved since I just found out how to randomize the array It took me three days to solve these problems lol At the third day I posted here but I got with the solutions by myself EDIT: lol ok Silly me.. I've just found out how to do that... Just adding a n in the answer texts solves this issue... I feel silly now =P ... However, I got another doubt, since I need to randomize the questions... Let's say I'd need 20 questions in total (with its respective answers). From those, I only need 10 to show... Ok, no problem here. The thing is, from those 20 possible questions, I need any 10 to appear randomly. I still can't found out how to randomize the items inside an array.
[Code]...
I am using RadioButtons within a radiobuttongroup. i want to change the order sequence of the radiobuttons of the group based on the end user's input.i have searched a lot, but all fell into vain.
I want to know whether it is possible to change the order of the radiobuttons?
I'm trying to make a quiz in flex and am loading data from an xml file. For each question I want to create a radiobuttongroup so I can associate radio buttons to it. How can I accomplish that with actionscript? I can see that addChild method works for DisplayObjects and I presume that radiobuttongroup is not one because I'm receiving errors. How can I dynamically add radiobuttongroup with actionscript in flex application?
View 2 RepliesWorking in Flex 3, I have a series of components being rendered on a canvas, each of which should represent a single potential selection, ideally in a RadioButtonGroup. So in my parent canvas I am defining the RadioButtonGroup, and each component provides a single RadioButton. However, this doesn't seem to work.
[Code]...
So my guess was that at this point if, say, four of these components were added, the radio buttons would behave in mutually exclusive fashion and I'd be able to access myRadioButtonGroup.selectedValue to get the current selection. However, it doesn't seem to work that way. Is what I'm trying to do even possible, or have I maybe just missed something?
Here is my code:
var x : int = 50;
var group : RadioButtonGroup = new RadioButtonGroup();
for (var i : int = 0; i < 5; i++) {
[Code].....
when i run the application, it shows me "0". Why this?
I had tried to use the radioButtonGroup under the GridItem in flex4. but it is not working[code]...It is not working. If any one knows how to assign values to radioButtonGroup to call the showSetting() function.
View 1 RepliesI have a UI component that, for various reasons, I have to construct programatically. The component is a table of radio buttons grouped by column.Right now, I'm constructing the column groups like so:
private function createGroupsForItemList(items: XMLList): void {
for each (var item: XML in items) {
var rbGroup: RadioButtonGroup = new RadioButtonGroup();
groups[item.@level.toString()] = rbGroup;
}
}
I'm trying to associate the RadioButton instances with the column groups like so:
private function createValueControl(item: XML): UIComponent {
var control: RadioButton = new RadioButton();
control.label = "";
[code]...
I can see in the debugger that the control has an association to the group:
control.group == groups[item.@level.toString()]
However, I can see equally that the group does not know anything about the control:
group.radioButtons.length == 0
I imagine that this is because the setter for group in RadioButton is a dumb setter; all it does is copy to the variable, which doesn't do the magic that groupName does. However, I can't seem to find the value I should use to set the RadioButton.groupName property correctly.So, in short, I'm stumped on how to get these bits to talk to each other. How do I do this?
-- EDIT -- It turns out that I can have the groups created and associated simply by setting the groupName property, but I can't get at the group to set up a selection listener; the group is NULL immediately after the setting process, which means that the second line below throws the Flex equivalent of an NPE:
control.groupName = groupNameForLevel(item);
control.group.addEventListener(Event.SELECT, updateSelection);
im trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
I'm creating a webpage, and I have made some buttons.Image 1 is the homepage, which is frame 1 in Flash.Image 2 shows that when I rollover the button "Portfolio,"I get a dropdown menu.I have this set as frame 3 in Flash.Image 3 shows that I've gone down the dropdown menu and rolled over "Photography." But if I rollout of any of the things from the dropdown menu, it stays at Image 2 (Frame 3)with the dropdown menu visible. Which is a problem...I want to be able to rollout of these buttons to revert back to the homepage, Image 1 (Frame 1).But, for instance, telling "Graphic Design" to go to Frame 1 on rollout means that if I try to go below "Graphic Design" to "Photography," I've rolled out--and so the rest of the menu disappears.So I want to roll be able to select anything from the dropdown menu, and only rollout to Frame 1 if I go outside the entire dropdown menu, not just one button.
Attachments:
3.jpg
(134.5 K)
lets say i have a
var rdGroup:RadioButtonGroup = new RadioButtonGroup();
how can i assign the id
rdGroup.id = "id_RdGroup";
and how can i add this group inside a VBox say
var vbBox:VBox = new VBox();
vbBox.addElement(rdGroup);
this thing gives error. that property id not found.
how to align Label followed by RadioButtons in Flex 4.5:
RadioTest.mxml:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
[code].....
I am a beginner and I have made an animation that consists of 4 Movie-Clip symbols (3 have motion tweens). I created it as a place holder for an upcoming website that I am designing. I am trying to select all 4 layers on my stage and convert everything into a single movie clip. I don't know what I am doing wrong.[code]....
View 5 Repliesi'm building a form in flash as2 with PhP.I'm using checkboxes in the form, but when selected more than one checkbox, the output in PhP is only the last selected.I used code from a thread i've found here on the forum.I have 3 checkboxes: thursday_cb, friday_cb and saturday_cb, and one button butSubmit
This is the as:
Code:
thursday_cb.label = "Thursday";
o_thursday_cb = new Object();
o_thursday_cb.click = function (obj){
[code]....
I currently have a list that I'm using to hold text so when an item in the list is selected the text is displayed in a text box along side it. I want to have the first item in the list to be pre-selected so the text for that item is already in the textbox when it is loaded.
View 1 RepliesI've got some dynamic text fields that have tabindex properties on stage.
There are some V2 components in the swf as well, so there is an instance of the FocusManager running.
I've got a pause button that I use to pause the playback of some other animations that are playing.
When I click the pause button I would like to have the focus go away from text entry fields (if they have it).
Is there a way to tell the FocusManager that nothing should have focus?
Selection.setFocus(null)
FocusManger.setFocus(null)
None of those work.
There is also an off-stage dummy text field that is used to capture focus for some other stuff in this file, but that doesn't work either.
The content that gets paused is variable and could have all kinds of designs and layouts, so having it respond to some kind of pause event is out. I need it not to be aware of the pause state. I just need the pause state to grab focus.
I have 75 frames in an animation. I have about 6 layers. I am trying to put a stop statement on the last frame.
Every time I open the Actions window it says Frame 1 even though the playhead is positioned on the last frame.
How do you place a stop comand on the last frame and which layer do I need to select?
Though, on one of the simplest things though I can not have the flash file select the XML files. It will select the first but will not continue with playing the rest of the songshere is my AS and XML files.
Code:
// Load XML Songs
var xml:XML = new XML();
[code].....