I have two different part of a file, I am downloading them together, and i want 1 progressbar to track the progress! i have tried:
ActionScript Code:
private function progressHandler(event:ProgressEvent):void
{
[Code]....
I have a ProgressBar in MANUAL mode responding an URLLoader's progress events that seems to get drawn far less frequently than I would like. If I debug the app, I can see many events firing from the URLLoader yet it seems that the ProgressBar is being re-drawn at some random and slow rate.
Now if this was my own code (URLLoader is a black box), I would pause once in a while to let the UI update, say via loop with a timer. I presume that the URLLoader itself is blocking the main thread from processing drawing code. Adding validateNow() and invalidateDisplayList() does not seem to help much.
private function onLoadProgress(resource: TResource, evt: ProgressEvent): void
{
_progressDialog.prbCurrentItem.setProgress(evt.bytesLoaded, evt.bytesTotal);
_progressDialog.prbCurrentItem.validateNow();
_progressDialog.prbCurrentItem.invalidateDisplayList();
}
Now there are many TResources (just a class that can manage its data) being loaded in sequence, but the URLLoader is so greedy that it does not let the UI get updated more than a few times when loading & processing (parsing into XML objects) 50 or so 10KB files. So just counting which files loaded visually does not work either; I'm lucky to get 2-3 screen updates the entire time.
Loading a 700MB file looks much better, but again the progress bar updates are random and slow.
Additionally, I'd like to know if there is any way to influence or even control the rate at which ProgressEvents are fired by the URLLoader class. I have not been able to find at what rate it normally dispatches progress events either; is it at a fixed percentage per file or every x frames or milliseconds?
As these are local files, would I be better off not using the URLLoader class and instead switching to FileStream?
i have a Air Project in which i have added three extenal source folders. but when i reopen project or strat flash builder again i get icon on those folder like this but when i open the configuration for that project and try to validate the path and adding it again i get message like this but the path is valid. proof is this pic what could be possible error,,, is there any way that i when ever re-open project i get no warning and able to navigate through the linked source code. now i am doing it
1- deleting on of the linked folder
2- again adding that folder.
So inside my src folder I have my app.mxml file. I have a source directory pointed to my actionscript library.It appears that Flex does not look inside that source directory including an .as file within the master mxml file.
Code:
<mx:Script source="com/domain/something/somethingelse/app.as"/>
I could just have the main app.as file inside the src folder along with my app.mxml file but it would be nice if it could live in the actionscript library.
I have this standard embed code to play my video:
<object height="409" width="600"><param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" /><param name="flashvars" value="src=rtmp://my-server/vod/flv:my-video" /><param name="allowFullScreen" value="true" /><param name="allowscriptaccess" value="always" /><embed allowfullscreen="true" allowscriptaccess="always" flashvars="src=rtmp://my-server/vod/flv:my-video"
[Code]...
So inside my src folder I have my app.mxml file. I have a source directory pointed to my actionscript library.It appears that Flex does not look inside that source directory including an .as file within the master mxml file.[code]I could just have the main app.as file inside the src folder along with my app.mxml file but it would be nice if it could live in the actionscript library.
View 2 RepliesThe progress bar doesn't work if the .swf movie that's being loaded is being loaded into another movie. If the loader is on the main stage it works fine both in testing and on the internet.For example, I created a parent movie and a child movie with a loader and progressBar. The child movie works perfectly by itself. If I load the child movie into the parent movie the progressBar doesn't work.
View 3 RepliesHelloI was just wondering, is there a way to change the way the ProgressBar component looks like? for example I'd like to keep its functionality but change its progress bar to a circular animation maybe?
View 2 RepliesHow can I set a progress bar that may start when an HTTPService is sent and stop when the HTTPService ends?I followed code given here but encountered following error Type was not found or was not acompile-time constant: ProgressWin.Don't know whether ProgressWin.mxml is a component or module or what. I just created a new ProgressWin.mxml file and pasted the code you posted but following error popped out before
View 1 RepliesWhat is wrong with the following code,I get the progress bar as loading only.
<?xml version="1.0" encoding="utf-8"?>
!-- http://blog.flexexamples.com/2009/02/01/setting-the-bar-color-on-the-progressbar-control-in-flex/ -->
[code].....
looking for solution for this problem. i was looking all over forwritten solution, but nothing came up. so, here i go once again..i have build a flash project where the most of the contentexternally loads in to the main movie. for each chapter i made a"Loader" component, and a "progressBar" connected to the "Loader".during buildng i was re checking that all is working well (testmovie with "simulate download"). then, i was uploading it to myserver and when i view it on "fireFox", or "Safari" , it allworking. but, when trying to view it on "IE", i never see the"progressBar" and, all the Actions that relate to the "on
View 1 RepliesComponent progressbar is striped when size is unknown but I have:
root.loaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgress);
function onProgress(event:ProgressEvent):void
{
progressbar1.setProgress((event.bytesLoaded/event.bytesTotal)*100, 100);}
So I use setProgress() so size is known - so why I have striped progressbar ?
I wanna set a custom skin on my progressBar, but it's not working out the way I want it to. My skin has 3 different colors on it (green, yellow, red) and green should show until it's about 50%, then I want the yellow to appear after green and the red at 90% after green and yellow. So at 100% they should all show.The problem is that the ProgressBar only sets the width of my skin so all colors are showing at all times. But if I use the indeterminateSkin but dont set indeterminate to true that doesn't happend.How can I make a skin that doesn't just change width? Atm I'm just using a MovieClip for a skin.
View 1 RepliesI have a function that when called takes about 10 seconds to run. like to add a simple progress bar to show the user something is happening but the progressBar dot run until the function is finished
btn.addEventListener("click",bigFunction);
private function bigFunction(event:Event):void{
var progress:ProgressBar = new ProgressBar();
[code].....
I am using ProgressBar Component i have upladed the flash file to my site.firefox 3.0 show the progressBar moving but ie7.0 doesn't.
View 0 RepliesI've got a child SWF that loads images from XML. in that child I've got a progress bar component tied to the loading if the image.When I test that child on it's own, the progress bar displays as it should.The problem comes when I load that child into it's parent SWF file. The progress bar magically disappears, and I get this message
Code:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChildAt()
[code].....
I want to make a progressbar. I got a blanc bar and I want to let a red bar grow (from left to right).
I got this code so far:
Code:
var StartDatum:Date = new Date(2011, 01, 16, 12, 38, 15, 0);
var EindDatum:Date = new Date(2011, 01, 16, 12, 59, 15, 0);
var TotaleTijd = EindDatum.getTime() - StartDatum.getTime();
[code]....
There is no error so the code is ok...
i have code for save image in server via php:
Code:
private function saveIntoServer (event:MouseEvent):void
{
[code]......
This is wierd. My AS for frame 1:
[AS]
loader.autoLoad = false;
loader.contentPath = "anmalning.swf";
pBar.source = _root.loader;
loader.load();
[Code]...
now, it works when I run it on my computer, but when I upload it to my webserver, the progressbar doesn't move and it doesn't disapper after the swf is loaded either. The two swf's is in the same catalog, both on my computer and on the webserver...
I'm trying to use the MediaPlayback component with an external .flv The video shows fine, but for some reason the progressbar isn't working.
View 1 RepliesI'm trying to jump to a position in the mc by clicking on a progressbar that is 388 pixels in width the total frames of the mc I am trying to jump to with the progressbar is 3348 my function is:
Actionscript Code:
progressBarMC.progressBar.onRelease = function(){ mc.gotoAndPlay(mc._totalframes / this._xmouse * 24); trace((Math.round(mc._totalframes / this._xmouse * 24)));};
im having trouble adding a progressbar components to a loader...all the images load and the progress bars too but the progress bars only change when they reach 100% and they do not disapper either..
View 2 RepliesI need to create an application where I can add files for upload. As I add items for upload, a progressbar should be displayed along with each item added. And when I click for file upload, the progress of file upload for each file should be reflected in the progress bar. The progress should use the function like.[code]
View 3 Repliesi have a game website, and sometimes is the swf game flash file > 2mb and the browser need a time to display it. And the Flash stay blank.
How i can make a progressbar with javascript to detect after how much time can the user play the game ( Swf file)
I am trying to create a custom progress bar which has common functionality implemented like twining and setting the total value etc., Every thing seems to be working but for some reason, percentComplete is always 0 instead of increasing the value even when I call setProgress()
Update1: Also, the tweener is not calling the onUpdate function (old code)
Update2: If I modified the onUpdate function like this, onComplete is called but onUpdateProgress is called only once
[Code]...
This is wierd. My AS for frame 1:
[AS]
loader.autoLoad = false;
loader.contentPath = "anmalning.swf";
pBar.source = _root.loader;[code].....
now, it works when I run it on my computer, but when I upload it to my webserver, the progressbar doesn't move and it doesn't disapper after the swf is loaded either.The two swf's is in the same catalog, both on my computer and on the webserver...
It might sound like a trivial question but how can I show progress bars, when datagrids and other components that "talk" to web services, update their data providers
View 1 RepliesI am using Flash CS5 and am getting a very odd error when I compile. All my classes are in the package com.es3.as2. In the first frame of my movie, I have the following code:
import com.es3.as2.Shell;
I have my classpath set correctly. When I compile, I get this error:
, Line 1 There is no class or package
with the name 'com.es3.ProgressBar'
found in package 'com.es3'.
This is odd because nowhere do I refer to a "com.es3" package. It's always "com.es3.as2".If I remove the import line, the movie compiles with no errors (but without the initialization code, it doesn't run correctly).
I dont know how to show the current progress in progressBar component when the process is a loop that requires a lot of seconds to do the job. Inside the loop, i setProgress and update the progressBar label in every cicle, but it is not shown up to the job is done. I dont need this, because i want to see the advance of process.
View 2 RepliesI am preloading a .swf file using the Loader class (myLoader) and a ProgressBar (pb). When the progress is complete I would like to press the button (es_btn) to enter the site(make the externatl .swf visible). Currently, what it does is, the external file is loading and starts playing in the background before I press the "enter site" button, before I call addChild(myLoader);. How do I stop the external file from autoplay -ing and make it play only when I press the "enter site" button?
Here is the code:
Select allstop();
import fl.controls.ProgressBar;
import fl.controls.ProgressBarMode;
es_btn.visible = false;
var myRequest:URLRequest = new URLRequest("christianfm.swf");
[Code] .....