I have a long video of 50 minutes duration..I want only show a segment for that video, for example I want to start from minute 15 until minute 16, Only shows a minute for that video, but, I want to see that video as a complete short video of 1 minute duration.How can I make this goal?
View 1 RepliesI have a long video of 50 minutes duration..
I want only show a segment for that video, for example I want to start from minute 15 until minute 16, Only shows a minute for that video, but, I want to see that video as a complete short video of 1 minute duration.
I am using the following code in many places, like you can see, there is m1,m2, m50,m51 m100 etc, it means i have 100 movieclips(in example below, there are 10 mcs only). [code]...
View 3 RepliesThis is what I would like to do. Change this:
Code:
this.onEnterFrame=function(){
if (blaah){ videoMC.vLoader.vContainer.holder.gotoAndStop(videoMC.vLoader.vContainer.holder._currentframe+2);
[Code]......
Is that possible, to substitute a long path with a short var. I know it can be done with any object property, but I'm not sure how to do it with a path, b/c what I've done so far doesn't work.
I'm using netstream to show a video in .flv.Over this video I need to show a couple of short animations, and when they play, I need to paus the long video so it doesn't plays in advance in the background.I've got this script to pause the movie:
Code:
btnPlay.onRelease = function () {
ns.pause();
}
But how do I apply it so that when the timeline hits a certain frame, it calls it. I mean, the user can't really know when to stop to see the animations, so it has to be done at a specific time.
Code:
this.onEnterFrame = function(){
ns.pause();
}
Would do it.
I'm quite new to flash but have experience in other adobe programs, I'm trying to create banner with imbedded short video no more than 5-6 sec.I was desperately trying to find some tutorials or any help on this subject without success.
View 2 RepliesI am a beginner looking to build my first Flash product. I am attempting to replace an existing PowerPoint, which is all text and picture based, and make it less boring by using Flash. I need to replace the pictures with about 25 short video files all under 30 seconds. Is it worth it to do this in Flash?Is there an existing template for this type of project?
View 3 RepliesI'm currently trying to implement a short video (10 seconds, looping) in a web page. Initially, we tried using HTML5 Video tag with .mov (and H.264 as video codec inside). The file size was a couple MB, but the servers we're using were at 99% CPU usage - which is way too high because they're stacked on top of one another and they could burn up if left at that pace for too long.
My question is simply: what is a good way to display a short 10 second looping video inside a web page that limits CPU usage and will keep a descent frame rate? We're exploring the option of good ol' Flash (SWF) files, but wanted to get some input.
I want to show a movieclip that says something like "please wait" before I run a function that takes a few seconds to fully execute.
below is what I have tried but it doesn't work...
ActionScript Code:
//pleasewait is a movieclip on the stage in flash professional
pleasewait.visible = true;
[Code]....
I use FMLE to publish h264 video to FMS , my server side code (main.asc)[code]...
View 10 RepliesI've got a Flash video that takes a very long time (30 seconds+) to load, which is obviously frustrating for users. I'm using the JWPlayer to embed the video.Flash experts (which is not me), what am I doing wrong? Or is the video file too big/server too slow? I've tried embedding in various ways (direct embed, swfobject) without change.I notice it does sometimes play right away on load, but I'm not sure if this is because at that time, the Flash video is cached in my browser.
View 1 Replieshow I embed a html5 video player only if there's flash in the browser? If there is flash in the browser I want to use it instead.
View 2 RepliesHow do you remove the black bars on the long side of iPhone video? I'm converting video to .flv for a Dreamweaver site, and would like to trim the black bar that runs along the long sides of the video.
View 2 RepliesI have an image on the stage which is bigger than the stage itself:
The stage is 700x550
The image is 2100x1650, and it's registration point is at its center, if I remember correctly.The initial location of the image on the stage is 350,75.I want to make sure that the user will be able to drag the image, as long as the edges of the image doesn't show.here's what I did:
mapRect = new Rectangle(0-mapMC.width/2, 0-mapMC.height/2, mapMC.width, mapMC.height);
and later on:
mapMC.startDrag(false,mapRect);
The the top and the left of the image are bounded well, but as far as the bottom and the right side of the image.
I'am making a advanced mp3 player arund this tutorial: [URL] and i want the users of the player to see how long they have listen or how long time back of the song. i have the AS i what to use but i cant connect them. becuase the tutorial i used does not make a sound objekt (MUSIC)
[COde]...
I'm trying to implement a simple NetStream video player with Progressive Video, but for some reason the video is taking about 12-13 seconds to begin buffering...I don't get it. If you check this link, you can see the buffer progress, you can see that it sits at 0 for >10s, until finally starting to buffer, at which point it finishes very quickly. [URL] It's a hard one to search for as any query using connection or slow obviously returns a bunch of crap that I don't need...
[Code]...
I'm trying to play a 10 minute long video (h264/mp4) which is 39MB in size, after I call stream.play(fileURL) it doesn't start playback until its loaded around 12-16MB of the file (many many seconds later), I finally get onMetaData at this point too. Why doesn't it begin playback right away, or at least w/in a couple seconds? What can cause this bloated lead in time?
View 2 Replieswhy dynamic streaming taking too much time to switch video from lower bit rate to higher bit rate and vice versa. I am doing dynamic streaming in following ways -
var param:NetStreamPlayOptions = new NetStreamPlayOptions();
param.oldStreamName=oldStream();
param.streamName=newStream()
[code]....
I am using duel buffering and that is 3 seconds when video starts and 10 seconds when "NetStream.Buffer.Full". Video taking approximately 30-50 seconds to switch video and when I am calling the above code.
I just created a basic flash file to play a video on my web page and it's taking several minutes to load before it starts playback. I'm using progressive downlaod and the file is in *.mov format and is 84MB in size. At first that seemed large to me for web play back, but I thought it could handle it since I thought the way progressive download works is that it would start playing the first frame right away and progressively play other frames as they download. However, this seems to be downloading the whole file first (or a major part of it) before starting any playback at all.
Is there some kind of setting I'm missing or is my understanding of the download incorrect and the file size is too large? Some vitals: I'm using Flash Pro CS5 - To create my flash file, I used the standard import video wizard and selected the a file that is "on my computer" and "load external video with playback component" and then, I selected one of the standard skins.- To deploy the vidoe on my webiste I have three files:
1) swf file containing the FLV component
2) the swf file related to skin
3) the actual video (84MB, mov file) - Web page includes/embeds reference to swf file
I'm porting in an .flv to Flash for the first time. I created the .flv from an .MP4 using Media Encoder CS5, and then opened a new Actionscript 3 .fla in Flash Professional CS5, clicked File > Import > Import Video. Then selected 'Load external video with playback component'. Everything seems to have imported fine, but when I publish the SWF and import it via Dreamweaver CS5 and preview the page, the video is there, but the controls are not. There's just a white box where the controls should be. Also, the video is out of sync with the audio, which I believe is a problem with Media Encoder, not Flash.
Here are some links:
The page that I'm working on (video at the bottom of the page)
The .FLA
The .FLV
The .SWF
I am building a flash video player with a custom UI, and admittedly I'm not sure exactly what I'm doing. I tried altering a skin, but that always comes out wonky due to whatever coding they use. So I'm altering single video components and putting them in the mc what I want them. It looks great, but the problem is that when video goes to full screen, all of the controls dissappear and I can't figure out how to make them show up. How do I get a movie clip to display on top of the video when it goes to full screen in flash AS3?
View 1 RepliesI have a sporadic bug where sometimes when a video is played the video doesn't show up for about 10 seconds but the audio is there.
i'm using flash as3:
_video = new Video();
_sound = new SoundTransform();
var connection:NetConnection = new NetConnection();
[Code]....
I created my flash video with a video skin I selected in CS4 and the skin file shows up in the same folder as the video but when I add the swf file to dreamweaver CS4 the controls that should show up underneath the video are not there.
View 2 RepliesI want to show related video's in flowplayer at the end of the video.
View 1 RepliesI am creating a website in Flash CS4 Actionscript 3.0? I want to have buttons that will only exist within a "Demo_Page" section of the timeline. I have the code below which works fine for buttons that exist through out the intire timeline.
[Code]...
I need to limit an angle so it fits into a segment. I have drawn and links to a diagram below to better describe what I am after. I am trying to calculate this for a computer program, where I have an angle (slope), and a point (the mouse pointer). The distance does not matter to me, just the angles. If the point is within b1 (green area) then that's fine. But if the point is within b2 or b3 (red or orange) areas, then the angle should snap back to the limit of the green area (along the line s).
The main problem I am having in figuring this out, is snapping the angle to the correct side e.g. If the point is in the red area, then the angle should snap to the angle s on the red side and vice versa. I am also having trouble because s could be any angle, so I am being tripped up because I can't just do something like this:
[Code]...
Currently I have the code:piechart.l1.gotoAndStop("percent_20")But I really need it to play from label "percent_1" to "percent_20" and then stop. Is there an easy way to do that?
View 2 RepliesI have an equation for a parabolic curve intersecting a specified point, in my case where the user clicked on a graph.
// this would typically be mouse coords on the graph
var _target:Point = new Point(100, 50);
public static function plot(x:Number, target:Point):Number{
return (x * x) / target.x * (target.y / target.x);
[code]......
I have 3 text fields that display weather conditions from the Weather.com XML web service. The 3 text fields need to be visible only during a certain segment of the Flash Video that is set as the application's background. Do I use AS3 to specify visiblity? If so, how do I reference a certain range of frames in which the fields should be visible?
View 1 RepliesIn raw format stream data are divided into many files named "segments". How can I configure the size of this files? I want to make them twice smaller.
View 1 Replies