ActionScript 3.0 :: StartDrag And Bounds - User Will Be Able To Drag The Image, As Long As The Edges Of The Image Doesn't Show?
Jan 19, 2011
I have an image on the stage which is bigger than the stage itself:
The stage is 700x550
The image is 2100x1650, and it's registration point is at its center, if I remember correctly.The initial location of the image on the stage is 350,75.I want to make sure that the user will be able to drag the image, as long as the edges of the image doesn't show.here's what I did:
mapRect = new Rectangle(0-mapMC.width/2, 0-mapMC.height/2, mapMC.width, mapMC.height);
and later on:
mapMC.startDrag(false,mapRect);
The the top and the left of the image are bounded well, but as far as the bottom and the right side of the image.
View 1 Replies
Similar Posts:
Sep 29, 2007
I load an image onto the stage and attempt to write this code to allow the user to click and drag the image, but it doesn't do anything!
[Code]...
View 2 Replies
Jan 30, 2009
I use startDrag in the code and it works. But when I try stopDrag it doesn't stop to drag.
View 1 Replies
Jun 21, 2010
I have Background layer, Bkg_Image layer & Video layer. I have embeded the flv movie on Video layer. Though on stage it shows all the layers, but when I test the movie it shows only Background layer & Video layer. I can't see the Bkg_Image layer.
The Actions layer has external swf loading AS3 which is working fine. Only the problem with Bkg_Image layer which is imprortant for me.
When I test movie, I see as in the following snapshot (Just the Background_Image & Video):
View 1 Replies
Sep 6, 2009
I have run into a drag and drop issue .I have an item that I would like to drag and drop. Seems simple enough, but I also want to make it that if the user drags the image off the screen, that it stops dragging and returns the image to the center of the screen. What happens now is that it continues dragging and sticks to the cursor if you release outside of the viewable area. The original piece has a lot of other things going on, so I ve created a simple piece with the AS in the timeline that shows only this particular issue.
Code:
var mrT:MC_mrT = new MC_mrT;
addChild(mrT);
mrT.x = stage.stageWidth*.5;[code].............
View 4 Replies
Aug 11, 2010
I am creating one desktop application of facebook.
So here I am getting streams from facebook post. So when any facebook application's long image link I am getting that I can't display in Image container, this is not displaying image.
One also fact is that, When I am giving this link directly then it is working.....
When I have seen this in Charlse Debugging proxy then it is displaying 403,Forbidden error of image.
View 2 Replies
Sep 24, 2009
I'm creating a shape in code based on some random points and then using it as a mask for an image. What I'm hoping to do is have the mask fade the image to transparent around the edges. I know I can do this using a gradient mask, the issue is how do I create a gradient on a shape that just fades out around the edges? The shape is not regular, so a radial or linear fill just won't cut it.
View 2 Replies
Oct 4, 2009
I am making a slideshow background which adjusts to the width of the browser. However, whenever I resize the browser, the background color is visible for a moment along the edges. How can I get rid of this. I know that it is possible. If you look at the following site, the images resize perfectly:
[URL]
View 2 Replies
Nov 16, 2010
I am trying to make this an kinda interactive map in flash. I will try to explain it for better explanation. Here is an image of the output I have a jpg image(converted to movieclip) which is way larger than the stage.
[code]...
Then I have a mask in the center of the stage and user sees a portion of the map and is allowed to scroll to move mouse around to see areas around the focused city.
[code]...
I put this numbers in by playing around but where are these values exactly coming from. I have tried everything(every possible way) but cant figure out what are these values. I need to numbers to be dynamic so I can change the focus to different cities(for example when a user click A city A should be seen inside the mask and so on).How can I make these values dynamic instead of hard coding them.
View 4 Replies
Mar 23, 2010
I found examples in adobe site only to position the object where the mouse pointer is. But i have to place the image in the position of drag proxy image.
View 1 Replies
Oct 6, 2010
What i want is: A slider that can be pulled by the user across an image to reveal a second one underneath. The same as this example, only I want a vertical scroll button not a horizontal. [URL]
View 7 Replies
Jan 31, 2009
How can I show an image that I have just captured with the webcam?I am able to save that image using PHP but before I save it, I want to show a preview. How can I do this? Here is a snippet of the code that I think can be used to do this:
ActionScript Code:
foo = new BitmapData(640,480);
foo.draw(myvideoobject, scaleMatrix);
[code].......
View 3 Replies
Mar 28, 2011
I have an image that doesn't fill the <mx:Image> tag because it's not the exact dimensions (it is too short) and I have maintainAspectRatio set to true:
<mx:Image id="theImage"
source="{data.photo_thumb}"
horizontalCenter="0"[code]....
The <mx:Image> tag has a fixed width and height (it's 100% of the tile size--this is in an ItemRenderer). How do I get the image to sit on the bottom of the <mx:Image> tag?
View 2 Replies
Sep 29, 2011
I have an application that I'm migrating from flex 3 to flex 4.5. In this application, there is some mx Image components that load a simple swf file (image). Spark image doesn't load swf files, so I was wondering, should I keep the mx Image, or should I change it to SWFLoader? Is there any advantages to using one or the other?
View 1 Replies
Oct 6, 2010
I am very new to Flash and have been trying to figure this one out for myself. Sadly i can't. What i want is:A slider can be pulled by the user across an image to reveal a second one underneath. The same as this example, only I want a vertical scroll button not a horizontal
View 2 Replies
Feb 6, 2009
i want to show a bigger image when the cursor is over the smaller version.
View 9 Replies
Aug 15, 2007
i am using the flash xml slide show which is in tutorial section. i want to show a image if the image didnot present @ the location given in xml
View 1 Replies
Sep 26, 2010
I've created a flash card class in ActionScript that uses a tween to flip the card over the y-axis (i.e., by using rotationX). I also use the bounds property of startDrag so that, when you drag it, its movement is locked on the x-axis. (There's also a method for switching between dragging and flipping, but since that's not broken, there's no need to discuss it further).
Here's my problem. If I haven't yet flipped the flash card over, the card drags fine. If I flip the card over and don't use bounds in startDrag, it works fine. But if the bounds property is set and then I try and drag the flash card after it's been flipped, the movement goes all haywire. It basically jumps back and forth between the two ends of the bounds' rectangle.
Is there any way you can think of to solve this problem? Alternatively, is there any way to use sprites to limit movement? For example, would it be possible to place a pair of one-pixel-thick horizontal lines on the top and bottom side of the flash card, set their alpha to zero, and somehow stop the flash card from moving past the lines?
View 4 Replies
Dec 17, 2010
I have a large movieclip (2336 x 1752) and a stage of 800 x 600. I want to be able to drag the movieclip around the stage so no white is visible:
minimum x before I get whitespace: -1536
minimum y before I get whitespace: -1152
maximum x before I get whitespace: 0
maximum y before I get whitespace: 0
I have tried this:
Code:
var mcBounds = new Rectangle(-1536, -1152, 0, 0);
mc.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
mc.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler);
[code]...
But it doesn't drag at all...when I try it just moves it to it's maximum position and stays there.Is it because the rectangle can't have negative values?
View 2 Replies
Jan 31, 2012
I'm using Agile Uploader in my project to resize image before upload on client side.And it works fine except one thing: if image name contains cyrillic letters it fails with server error 500.
How to avoid this or if needed how to rename file with english letters "on fly" (possibly with javascript).
View 1 Replies
Apr 13, 2010
from my main class i call to create a sprite and add it to the stage
private function addSwatch(evt:MouseEvent):void
{
if (stage.getObjectsUnderPoint(mousePoint()).length == 0)
{
[Code]....
View 1 Replies
May 13, 2010
I wish to stop my mask being dragged outside the bounds of the image. The current set up I have is as follows. I created a circle and added a blur; I then exported it for action script setting its class as a sprite with the class name "Circle". I also made my image i was going to mask a Movie clip with the isntance name "mc_bee". In the actionscript I added it to the stage, positioned it and cached it. I tried to add in actioscript to create the bounds the image the mask is making with the code below:
[Code]...
View 1 Replies
Oct 7, 2009
check out this website first for what I'm going for:
[URL]
The header is a graphic of a guy's head and a car.
I want to design the same kind of page but my header graphic will have a cartoon head instead of that guy's head and it will animate.
Now If the user does not have flash installed I would like to have a static header image appear, like a .jpeg or a .gif, instead of the .swf header.
View 2 Replies
Feb 18, 2009
I want it to while still easing into place like the iphone does. For example my stage is 550px. The drag and throw MC is 1650. That's 550x3. If the first image is showing starting at x axis 0 and you drag to the left it will ease into place stopping and showing the second image stopping the image at x axis 0. And the same thing scrolling to the next one and scrolling back. So the code is below and I've attached the movie that I'm working on.
[Code]....
View 8 Replies
Oct 24, 2009
I have a bit of an odd problem with attachMovie. In my library I have several movies all build up in pretty much the same way.They are a couple of frames long with a different image on each frame.They have a color layer at 70% as sort of an overlay. And on top of that a layer with a movieclip to serve as a mask for the overlay. On the stage I have a movieclip named holder to attach them to and a couple of buttons to do that.The buttons execute the following function:
[Code]...
The thing that happens now is that the gotoAndStop part works fine and the clip goes nicely through the frames but the animation of the mask doesn't work at all. I've checked the naming several times and when I place the clip directly on the stage the mask animation works fine. So somehow when I use the attachMovie command the link to the navmask instance gets either lost or it's not possible to animate it at all in an attached movieclip.
View 1 Replies
Nov 13, 2010
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
View 3 Replies
Dec 10, 2010
I am currently working on a flash website that has several flv videos on it. Since the website layout has a slight tilt, I have had to transform the videos to slightly tilt as well. The problem that I am having is that when I do this the image becomes very pixelated and the edges of the video become jagged. I have somewhat fixed the edges issue by making a mask around it but i really dont know how to make the resolution better, or what causes it to loose resolution when slightly transformed. The size of the videos is the same as encoded. All I do is tilt them upwards on the right side a bit.
View 1 Replies
Feb 24, 2005
[code]...
this[newroto].rotographic.gotoAndStop(random(this[newroto].rotographic._totalframes)+1); <-- this line gets the images randomly.. and i wanted it to show all images... like the image on frame 1 the image on frame 2 on frame 3.. this 7 (the var set on the beguining..)
View 1 Replies
Feb 6, 2009
It happens when you drag the scroll slider out of bounds and you release - even when mouse is up the slider still moves. I consider it a glitch. What does somebody has to do to fix it?the code I use for the slider:
Code: Select allscroll_btn.buttonMode = true;
var dragging:Boolean = false;
var bounds:Rectangle = new Rectangle(-10,-13,0,138);
[code].....
View 4 Replies
Nov 3, 2010
I have adapted some script that enables some easing on drag of an mc, My issue is how do I add bounds the the drag. I have added two variables (leftX and rightX) but I don't know what to do from here.
Code:
import flash.display.StageScaleMode;
import flash.display.StageAlign;
import flash.events.Event;
[code]....
View 1 Replies
