I have an mp3 file that is mainly narration and I have a very simple soundSpectrum routine placing a soundwave. the issue is that the spectrum starts before the actual audio, so it is completely out of sync. it appears like it's buffering, so I am curious if there is a way to prevent the buffering and play right away or buffer the soundSpectrum.
View 3 Replies
I'm stucked in middle of my application, where I need to implement sound spectrum on streaming audio. Does any one knows how can we add sound spectrum on streaming audio.
View 4 RepliesI have an application that uses FMS 3.5 to stream live audio between 2 computers.Currently, the delay between when the person speaks and the time the other person hears it is about 2 - 3 seconds.This makes it difficult to have a conversation because one person regularly steps on the other.I am using a NetStream object that connects to the fms server.I then attach audio.What configurations can be set so that the least amount of delay is experienced between the two computers? Can fms ever relay audio as quick as something like Google Talk?
View 4 RepliesI have been working on a voice-chat system in AS 2.0 using FMS 3.5 for a while now. I have been experiencing a lot of latency. Usually there's no latency to begin with but it grows over time to several seconds. Up until this point, I have assumed that this latency is due to a slow server/low bandwidth since I have tinkered around with all of the buffer settings (that I know about) already.However, today I decided to see what would happen if I just attached the audio of the microphone to _root. In other words, the script does not connect to FMS and there's no streaming going on at all. All I have is essentially:
myMic = Microphone.get();
_root.attachAudio(myMic);
However, even in this case I get a delay! In fact the same sort of thing happens: there's no delay to begin with, but it grows to approximately 1.5 seconds over time (very quickly in fact). In order to track down where it could be coming from, I decided to add a microphone activity clip that showed the activity of the mic. Perhaps not so surprisingly this activity clip was perfectly in sync with the actual activity of the mic (i.e. no delay). So it seems like there's a delay due to the attachAudio command.
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 RepliesI have a few animations that run on different scenes each time a scene is loaded the external audio should start with it. Well here is the thing the animation always starts before my audio files and each scene gets bugged. I need to create an action that only allows my scene to start with the audio and also starts loading the next audio so it wont be dellayed.
On the first scene I have the following code:
scene 1 frame 1
var autoPlay:Boolean;
if(!autoPlay){
stop();}
scene 1 frame 2 animation starts and audio 1 loads
import flash.media.Sound;
[Code] .....
Basically I want to recreate a sound installation that I made a couple of months ago which used Logic Express and a Tape Delay effect to take ambient sound captured by a mic, delay its output by 3 seconds, and then play it into the headphones. All without recording anything and in realtime.I've basically got this far, which lets me hear the mic input through my headphones loud and clear. Now all I want to do is apply a 3 second delay to the input before it outputs. Do I have to send the audio to a buffer where it can be constantly stored and rewritten?
Code:
//Create a new Microphone
var mic:Microphone = Microphone.getMicrophone();
[code].....
I have created a mp3 player to stream 15 mp3s, each is about 5Mb & about 5 minutes long.
I have also created a simple visual equalizer with SoundMixer.computeSpectrum(). It is only 128 simple lines dancing across the whole page.
It all looks fine, except after playing for about 2 tracks, the browser is frozen and need to be shut down.
I wonder if this is due to the download limit of the server or the SoundSpectrum, or some other issues?
I am looking for my soundspectrum animation to play but my sound will be muted...This will be inserted in a banner ad, so their are specific rsestrictrictions with vendors where the sound has to be user initiated...
var SpectrumLineWidth:Number;
var SpectrumLineColor:Number;
var SpectrumGlowDirection:String;
[Code].....
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesI want to create a function based (not frame) delay of about 10 seconds to the function at the start of a flash movie, the code only needs to run once.I'm very new to actionscript and have been given links to SetInterval and SetTimer examples but they all seem to be very complex.The function is below. I believe it's possible to add the commandTimer(delay:Number, repeatCount:int = 0) how me to a simple example.
onClipEvent (enterFrame) {
framePos = int(_xmouse / 100 * _parent._totalframes);
if (framePos < 0) {
[code].......
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Anyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
I am converting from .FLV's to .F4V. Video outputs fine but the audio sound stops after a few seconds from the beginning.I have tried many different settings for the audio with no luck. Also, tried on a colleague's machine who is running CS3, which works fine, so something is buggy in CS4...
View 1 RepliesBecause the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 RepliesLet me first establish what I want to do:My user is able to record voicenotes on my website, add tags to said notes for indexing as well as a title. When the note is saved I save the path of the note along with the other info in my DB.Now, I have 2 choices to do the recording, both involve a .swf embedded in my site:
1) I could use Red5 server to stream the audio to my server and save the file and return the path to said file to my app to do the DB saving, seems rather complicated since I would have to convert the audio and move it to the appropriate folder that belongs to the user in a server side Red5 app, which I'm not very aware of how to build.
2) I could simply record the audio and grab its byte array, do a Base64 encoding on it and send it to PHP along with the rest of the data that is necessary (be it by a simple POST or an AJAX call), decode it on the server and make the file with the appropriate extension, audio conversion would also occur here using ffmpeg, this option seems simpler but I do not know how viable it is.
Is there a way to stream and audio line level feed rather than the audio from a computer's microphone?
View 1 RepliesI have an audio player that has a custom timeline and playhead. I am using a start and stop drag to move in the time line but the only way i can make it work is to have it play when ever I release the play head. I would like it to stay stopped if the player is paused and play if the player was playing.
[Code]...
The images for animation load okay. The sound loads okay. But the animation images need to be inserted in coordination with the sounds, which is difficult using only the ears There is a visual graph of audio levels in the library window, which I have seen appear in the timeline also but only momentarily. I do not know how to keep the audio graph on the timeline so as to know where to put the images. I can keep the graph open on the little library window when it is open but not on the timeline. how to keep the graph open on the audio track while I work on the image tracks.
View 1 RepliesMy server is streaming binary audio data (mostly mp3 files) to a client (a browser). This client stores the audio data in memory.
What I'm looking for is a flash audio player that I can input the binary audio data so that it can play the audio file.
Preferably, the flash client is merely a bridge to Javascript so that I can handle everything in Javascript and simply use Flash's audio features, but this is not a requirement.
I have a single audio file, I'd like to avoid cutting it up.
I know I can use the sound class, mySound.play(150), to start at 150ms but haven't come across a way to stop the audio say after 500ms or at 650ms.
I'm looking for a (free) flash player that I can embed in my site and use to play a .m4a (.mp4 with AAC audio) file that will be obtained using a URL (i.e. it's not local to the server hosting the web page).I've tried searching on google for one, but either I'm searching wrong or no one has made such a thing. Ideally this would be very simple (small user interface with play button and maybe a progress bar) and it would be easy to have multiple instances of on an html page (can create the player with an <object> tag).
View 7 RepliesI am new in action script 3.0. i am trying to build an audio player which will stream audio(mp3 etc.) from wowza media server. the player needs to have a play button, stop/pause button, a play progressbar and a volume scroll bar. i am using NetStream object to paly the audio
View 1 RepliesI am creating an audio communication application. In that two users are able to communicate. But the problem is that some time in audio I am facing an echo problem.
View 2 RepliesI was wondering if anyone could help me get some information on audio limitations in flash. Is it possible to have audio "scrubbing" that allows you to hear the audio as you scrub? Currently the only way I know to do this is by having it on the timeline, and set to stream. Using this method seems to be causing more issues than it solves. Preferably I would just like to load the audio in dynamically and then scrub through it. Is it possible to use that method and then still retain the ability to hear it as you scrub through it?I am having with the audio on the timeline. The main issue with this is that I have to manually add frames to the timeline, in addition to that I can not dynamically load the audio through xml. Well not that I know of.I think the best route is probably loading in the audio dynamically.
View 0 RepliesI am streaming to live videos with audio to our webpage, each with it's own accompanying audio. On my laptop, I could stream them without any trouble but it would overheat so I had two new computers built just for encoding. Now, on the new computers, the 2 videos stream fine but only on audio file works at a time. The other just gets hung up on one note of sound and repeats very annoyingly over and over.
View 2 RepliesI think it is loading the whole audio first into the swf, but I would like to get confirmation from someone more knowledgible.[code]I want it to stream the audio when the button is clicked only so that 100 of these swf will not slow down a whole webpage from loading.[code]I only start getting concerned when I noticed that on FF and Chrome, the page loads really quick but when I open the page in IE, it takes a very long time for the page to appear.
View 3 RepliesI'm interested in learning how to decode and playback audio in ActionScript 3. I understand how to write bytes to a Sound object using the SAMPLE_DATA event, so that's not really a problem. What I want to understand is how I could implement alternate audio formats for native playback inside of Flash Player. I guess what I'm asking is: how do I take something in X format and "convert/decode" it to WAV format and write the bytes to a Sound object, playing back the audio? I'm interested in writing a decoder for FLAC audio and possibly OGG audio, as these seem to be some of the most widely used open source audio formats
View 2 RepliesIs there any tool can help me rip audio from SWF file and ave it in MP3 format separately in another folder, and extract audio stream to MP3, AAC, M4A, WAV, WMA, AC3, MP2 formats?
View 3 RepliesI have some video which I have converted into .swfs I am trying to set delays to the three videos, so that the first swf plays on page load. The second loads after 30 seconds and the third after 45 seconds.
View 11 Replies
