I am converting from .FLV's to .F4V. Video outputs fine but the audio sound stops after a few seconds from the beginning.I have tried many different settings for the audio with no luck. Also, tried on a colleague's machine who is running CS3, which works fine, so something is buggy in CS4...
View 1 RepliesI ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
I need to capture audio from a microphone using a flash object in a browser and live stream it to Flash Media Server. The Flash Media Server will in turn live stream the audio to users. Do I have to use Flash Media Encoder to capture the audio? Is it possible to capture the audio without the need of installing the Flash Media Encoder and somehow stream it to the Flash Media Server?
[Code]...
I'm having trouble getting the Adobe Media Encoder CS4 to work properly. I have tried multiple files of different lengths but end up with the same output. Nice video encoding, but the audio starts and then cuts out after a couple of seconds. The longer the video, the shorter the audio works. The logs don't report any
issues.
I'm running CS5.5 on an intel Mac 10.6.5, and I have been having problems encoding to flv. All my videos are edited the same way, and using the same formats etc., yet recently I have found that when converting to .flv, some will work fine, and others will have the audio replaced by white noise.
Checking through the video specs, it appears that the one difference is that the ones which worked fine are all Apple ProRes 422 HQ files, and the ones which failed are Apple 10bit Uncompressed. The strange thing is the audio is the same for both. Yet when the encode problem happens, the video for both is fine, its just the audio where the problem appears.
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 RepliesI did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 RepliesI have a broadcasting project that I've got where the host of the show can have multiple sound effects they can use on their show.I'm wondering if the only way to go about this is for all the clients listening to the show need to download the mp3 of that sound effect or if the sound effect could come from the host ...like combining his mic (for his voice) but also straight audio (the sound effect) into the stream.
View 1 RepliesIs there a way to stream and audio line level feed rather than the audio from a computer's microphone?
View 1 Repliesflash media server ,provide property Microphone.names that retrieves an array of strings reflecting the names of all available sound capture devices. is there is any property that detect output device attached to system so i can select which one to play back sound. for example:- i need to play back mp3 file in flash. but i have more one output device installed in my pc. the question is:- is there is any way for falsh to list all (or detects) audio output device installed in my pc then let me pick one of them to play back sound by selected output device?
View 7 RepliesIf I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesAre there any audio encoding libraries for Flash? I need to record sound from a Flash applet, and then upload it to a server with HTTP. The problem is that the raw audio file is really big. Is there any way to encode it into MP3/OGG/etc from Flash and then upload it to the server?
View 1 RepliesI have little problem with my script. Here is the code. [URL] When I set setInterval to something like 10 seconds, sound stops in about 10 calls to reset. But when its something like 20 mins it stops in first reset call.
View 1 RepliesI have 1 flv with only 12 seconds of audio.another flv that is 10 seconds with only video
another flv that is 2 seconds with only videoLets assume both video files are as long as my audio file.Which actionscript commands should I look further into to: 1. play audio simultaneously with video 2. play the 2 second video smoothly/seamlessly after the 10 second video is over as if it were a 12 second vide 3. if my audio or video were mp3/wma instead of flv would I run into trouble 4. I imagine a flash media server would be mandatory if my videos were other formats like avi/mpg and had to encode on the fly
I'm trying to load a movieclip that has some video running on it using a page container dynamically on the click of a button. however im not able to get the audio from pausing even when this page has been navigated to another. The video gets hidden behind the newly called page however the audio still continues to play on the called pagethis is the code i wrote to add the movieclip(page) to the container..
var gp1:gpage1=new gpage1;
menu_cont.media_menu.press_review.addEventListener(MouseEvent.CLICK,mediaclik3);
function mediaclik3(event:MouseEvent ):void {
[code]....
We are running FMS 4.0 to stream on-demand MBR videos using the OSMF player. We have noticed that occasionally during playback the video freezes, while the audio skips back a few seconds and starts playing. Once the audio catches up, the video unfreezes and resumes normal playback.
View 2 RepliesBasically I want to recreate a sound installation that I made a couple of months ago which used Logic Express and a Tape Delay effect to take ambient sound captured by a mic, delay its output by 3 seconds, and then play it into the headphones. All without recording anything and in realtime.I've basically got this far, which lets me hear the mic input through my headphones loud and clear. Now all I want to do is apply a 3 second delay to the input before it outputs. Do I have to send the audio to a buffer where it can be constantly stored and rewritten?
Code:
//Create a new Microphone
var mic:Microphone = Microphone.getMicrophone();
[code].....
I'm trying to compress a video into an flv for my flash file. When I compress the video using flash video encoder the video shows up white but I can see the audio. The original version is compressed using H.264. I don't know enough about codecs to know why its not showing video.
View 1 RepliesI want to create a flash application where users will have access to 10, 5 seconds audio loops. They can choose any 4 tracks to make a 20 second track. I then want that mp3 to be stored somewhere or flash to create to a file which can be sent to friends in facebook where they can listen to that beat. There will be a little button at the bottom saying 'click here' to make your own beat.
View 1 RepliesAnyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
Because the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 RepliesLet me first establish what I want to do:My user is able to record voicenotes on my website, add tags to said notes for indexing as well as a title. When the note is saved I save the path of the note along with the other info in my DB.Now, I have 2 choices to do the recording, both involve a .swf embedded in my site:
1) I could use Red5 server to stream the audio to my server and save the file and return the path to said file to my app to do the DB saving, seems rather complicated since I would have to convert the audio and move it to the appropriate folder that belongs to the user in a server side Red5 app, which I'm not very aware of how to build.
2) I could simply record the audio and grab its byte array, do a Base64 encoding on it and send it to PHP along with the rest of the data that is necessary (be it by a simple POST or an AJAX call), decode it on the server and make the file with the appropriate extension, audio conversion would also occur here using ffmpeg, this option seems simpler but I do not know how viable it is.
I have an audio player that has a custom timeline and playhead. I am using a start and stop drag to move in the time line but the only way i can make it work is to have it play when ever I release the play head. I would like it to stay stopped if the player is paused and play if the player was playing.
[Code]...
The images for animation load okay. The sound loads okay. But the animation images need to be inserted in coordination with the sounds, which is difficult using only the ears There is a visual graph of audio levels in the library window, which I have seen appear in the timeline also but only momentarily. I do not know how to keep the audio graph on the timeline so as to know where to put the images. I can keep the graph open on the little library window when it is open but not on the timeline. how to keep the graph open on the audio track while I work on the image tracks.
View 1 RepliesMy server is streaming binary audio data (mostly mp3 files) to a client (a browser). This client stores the audio data in memory.
What I'm looking for is a flash audio player that I can input the binary audio data so that it can play the audio file.
Preferably, the flash client is merely a bridge to Javascript so that I can handle everything in Javascript and simply use Flash's audio features, but this is not a requirement.
I have a single audio file, I'd like to avoid cutting it up.
I know I can use the sound class, mySound.play(150), to start at 150ms but haven't come across a way to stop the audio say after 500ms or at 650ms.
I'm looking for a (free) flash player that I can embed in my site and use to play a .m4a (.mp4 with AAC audio) file that will be obtained using a URL (i.e. it's not local to the server hosting the web page).I've tried searching on google for one, but either I'm searching wrong or no one has made such a thing. Ideally this would be very simple (small user interface with play button and maybe a progress bar) and it would be easy to have multiple instances of on an html page (can create the player with an <object> tag).
View 7 RepliesI am new in action script 3.0. i am trying to build an audio player which will stream audio(mp3 etc.) from wowza media server. the player needs to have a play button, stop/pause button, a play progressbar and a volume scroll bar. i am using NetStream object to paly the audio
View 1 RepliesI am creating an audio communication application. In that two users are able to communicate. But the problem is that some time in audio I am facing an echo problem.
View 2 RepliesI was wondering if anyone could help me get some information on audio limitations in flash. Is it possible to have audio "scrubbing" that allows you to hear the audio as you scrub? Currently the only way I know to do this is by having it on the timeline, and set to stream. Using this method seems to be causing more issues than it solves. Preferably I would just like to load the audio in dynamically and then scrub through it. Is it possible to use that method and then still retain the ability to hear it as you scrub through it?I am having with the audio on the timeline. The main issue with this is that I have to manually add frames to the timeline, in addition to that I can not dynamically load the audio through xml. Well not that I know of.I think the best route is probably loading in the audio dynamically.
View 0 Replies