I am looking for my soundspectrum animation to play but my sound will be muted...This will be inserted in a banner ad, so their are specific rsestrictrictions with vendors where the sound has to be user initiated...
var SpectrumLineWidth:Number;
var SpectrumLineColor:Number;
var SpectrumGlowDirection:String;
[Code].....
i have a project that i'm working on for school in a multimedia class. everything in the project is essentially done except i need to load a few sounds into the project file all at the same time. as this would be rather unpleasent to listen to, i want them all to be muted when they are loaded (externally or internally, it doeesnt really matter) in. my professor doesn't seems to be very helpful so i decided to come to the source. the program i'm using is flash pro cs5.5 with as3. i think there is some code for controlling the volume, and optimally that is what i would like to use, like "setVolume = 0" and then later when i want the sound(s) to be heard "setVolume = 100", or something along those lines.
View 5 RepliesI have a custom Flash Video Player and I have the play and mute button as controls. Currently my player has the sound on, I want to set it as muted by default.
This should also show my mutebutton as on as a visual cue. The only line of code I am using for the mute button is this
myVideo.muteButton = mute_btn; // which is just telling the flv component which button needs to act as the mute button
Using Flash CS3 , Actionscript 2.0
I got extremely two easy lines of code that I put in my action Frame 1 which fixed everything.
myVideo.volume = 0;
myVideo._uiMgr._isMuted = true;
myVideo is the name of my FLVPlayback component
I need to check that the user has not muted the system before running my main movie (as indicated by the red bar over the speaker icon on the lower rgiht) and if so prompt to unmute with pop up. Is that something I can do with Actionscript 3 or is it sometihing that needs to be addressed with JavascriptWSH?
View 3 RepliesI have a project where an external video plays with cue points that trigger the elements on my main timeline (captions). I have a custom mute button for the video so that the guy talking on the video can be muted if necessary (did not use a skin for video controls but set it up as a button). The problem is, when I reach the end of the video and I click a "replay" button to restart at the beginning, the timeline and video start but if the video was muted previously, the video remains muted while my button shows that it isn't. How do I get the audio to turn back on automatically when restarted, or at a minimum show that it's still muted when replaying? My replay button AS2. mcPlayer is my flv.
[Code]...
I have made a 5 min animation with stream sound. Its playing perfectly in PC. But in mac,its not playing. Stream sound starts from frame 60. So mac plays the swf plays till 60 frame, after that it pauses. I tried importing different sound format (wav, aif, mp3) and tried with all sound export setting but the problem remain same; its playing only till 60. When i removed the sound, it played till end. Even with event sound, it plays till end. But with stream sound, the problem. The problem is only in mac; in pc its perfect.I am using VMware Mac OS x leopard in window xp for testing purpose. I tested it in laptop with mac; but the problem is same. What could be the solution?
View 1 RepliesI have made a 5 min animation with stream sound. Its playing perfectly in PC. But in mac, its not playing. Stream sound starts from frame 60. So mac plays the swf plays till 60 frame, after that it pauses. I tried importing different sound format (wav, aif, mp3) and tried with all sound export setting but the problem remain same; its playing only till 60.When i removed the sound, it played till end. Even with event sound, it plays till end. But with stream sound, the problem. The problem is only in mac; in pc its perfect.I am using VMware Mac OS x leopard in window xp for testing purpose.
View 2 RepliesI wanted to make a visulisation based on sound, like a winamp plug in.The only thing that even remotely looks like it uses sound information is the sound players on FlashKit. (although they might be faking it)url...Is there any information that can be pulled from a currently playing sound in Flash to base a animation off ?
View 3 RepliesI have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 RepliesI'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
[Code]...
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 RepliesThe thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
I have an mp3 file that is mainly narration and I have a very simple soundSpectrum routine placing a soundwave. the issue is that the spectrum starts before the actual audio, so it is completely out of sync. it appears like it's buffering, so I am curious if there is a way to prevent the buffering and play right away or buffer the soundSpectrum.
View 3 RepliesI'm stucked in middle of my application, where I need to implement sound spectrum on streaming audio. Does any one knows how can we add sound spectrum on streaming audio.
View 4 RepliesI have created a mp3 player to stream 15 mp3s, each is about 5Mb & about 5 minutes long.
I have also created a simple visual equalizer with SoundMixer.computeSpectrum(). It is only 128 simple lines dancing across the whole page.
It all looks fine, except after playing for about 2 tracks, the browser is frozen and need to be shut down.
I wonder if this is due to the download limit of the server or the SoundSpectrum, or some other issues?
I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
How do you set an FLV player to be muted automatically on load? I know how to make the volume 0 on load but I actually want to set the mute button state to muted so the user can click on it to unmute it.
View 2 RepliesI'm having a problem with audio of Captivate demos created in Captivate 4 loaded into a Loader component using Flash 8 and AS2. Problem is if someone is viewing a Captivate demo and hits the Audio On/Off button on the playbar to turn the audio off and then returns to the menu, the next Captivate demo loaded has no audio until the user click the audio Off/On button a couple of times. Even though when loaded, the playbar audio is shown as on.
I've already tried cpCmndMute and cpCmndVolume to no avail. Is there another audioOn variable I'm missing?[url]...
Im making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.
I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.
Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.
View 3 RepliesI have a playhead that moves across the screen and when it hitTests a movie clip it plays a sound. all is working fine except that it will only work the first time it is played. The playhead is controlled by a button. I am working in Actionscrpt2. Here is the code on the movieclip:
onClipEvent(enterFrame)[code]....
In the begining I was having trouble because the hitTest was playing the sound over and over but the above code sorted that out. I think that the new problem was created by fixing the old one.
I want to achieve the effect of a computer startup. IE, it only plays -once- and then doesn't play again for the rest of the time, even if the user comes back to the same menu. How do I get Flash working that way? I've tried variables to no effect... it doesn't want to change the variable condition.
[Code]...
I have another one to get off my chest.I am basically doing a spinning wheel game - i want the sound to play each time the Stopper hits a new prize section of the wheel.In my code, from my EnterFrame function, i call my playSound function but the sound file just never plays .. i know the function is being called as i can see it in trace.I suspect that because the EnterFrame is constantly being called, that the sound file - because it has determined it won't complete - it ignores it totally.[code]
View 2 RepliesAnyone know why this keeps playing the same sound over and over?
If I call it using:
Code:
var sounds:src.snd.SoundManager = new src.snd.SoundManager(); // This isn't how I do it, but ... you understand.
sounds.queueSound('libsound1');
[Code]...
I have a small sound effect (less than 10KB) I have placed on my timeline. When I test it directly in flash, I can hear the sound effect, but when I CTRL + test my movie, I can't hear the effect?
View 1 RepliesI'm having a problem with my animation playing for one of my characters, I have a method which is constantly sending the que to play the animation. When i press a key the character accelerates and the animation plays fine, however as soon as i let go of the key and the character begins to decelerate on its own the current frame reverts back to 1 and stays on 1 until i accelerate again. I want it so that the animation continues to play from its current frame rather than reverting back.[code]
View 5 Replies