ActionScript 3.0 :: Unwanted 'blinking' On Roll_Over?
Nov 11, 2009
Basically I'm creating two (can be more or less) rows of layered MC treaten as Buttons.In each MC there is a small thumbnail hidden behind a coloured layer. When roll_over the coloured layer, this alpha goes to 0(zero) and entire MC resize +10% over x and y.On roll_out the opposite occurs, everything should get to the original alpha and size.
The Problem: when moving the mouse really fast over the MC's and stop suddenly over one of them it starts 'blinking' (size and alpha goes in and out and won't stop unless you move the mouse a little)
ActionScript Code:
for(var i:uint =0; i<16; i++){
var miniPnt:MovieClip=new LittlePantone();
miniPnt.x=_xc;
[code]....
View 2 Replies
Similar Posts:
Jan 22, 2010
I want to create a MovieClip button that when the mouse rolls over it, it scales larger and then when the mouse rolls out of it, it scales back to normal size.If i move the mouse cursor over and out of it slowly, the animation is fine, but if enter the mouse over it on one side and out on the other side or jerk my mouse around it acts as if the EventListeners and their respective Tween code has been reversed. I have even seen on occasion the square filling the whole screen.Here's my code:(this is written from memory and not copy pasted from flash, but before you say anything, I do have the proper imports for classes in the code so I wont include them here.
Code:
var yTween:Tween = new Tween(myMc, "scaleY", Elastic.easeOut, 1, 2, 2, true);
yTween.stop();
[code].....
View 2 Replies
Mar 31, 2004
how one can use AS for blinking text (as a MC) effect with optional blinking speed? Mx-guest2004
View 4 Replies
Feb 22, 2010
this is what I want.I have a MC whose color is set to Alpha 0 which is placed over an area where I want on ROLL_OVER the mouse to change to my custom cursor (which will indicate that a mouse click will "do something")this is what I have done.1. created a MC that will be used as my Custom Cursor with alignment sent to center/middle (or center sq. in the grid)2. I have exported it for AS
Code:
//roll over and roll out event handlers: (tgIcon_mc is the MC that I want to make active.)
tgIcon_mc.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);
[code].....
View 1 Replies
Jun 13, 2011
'm still rather new to AS3, I'm trying to make a roll_over scroll function however I've only got it to move a little bit each roll over, I'd like it to continuously do so until the mouse has come off the button area
Scripting:
reel_mov.x=14
r_button.addEventListener(MouseEvent.ROLL_OVER,right);
[code].....
View 7 Replies
May 5, 2010
I have a problem with a mouseover-effect. I have a lot of different objects on my scene. Whenever the mouse is rolled over one of these objects, they will appear a bit larger until the mouse is moved again. I have made it work like this (and it functions):
package
{
import flash.display.MovieClip;
import flash.events.MouseEvent;[code]........
My problem now is, that I want to add another roll over effect:If the user rolls over one of the objects, it will appear a bit larger until he moves his mouse away, but if the user does not move the mouse for more than one second, a "pop-up window" (=New roll_over mouseEvent) has to appear, while the object STILL appears emphasised.So, how do I add a second roll over effect, which appears 1 second later?(the second roll over effect should be a png-image)
View 6 Replies
May 18, 2009
I cannot for the life of me figure out how to return a value out of a ROLL_OVER function. It seems extremely easy, yet I cannot get it to work. Here is a simplified version of what I am trying to do:
test_mc.addEventListener(MouseEvent.ROLL_OVER, testOver);
function testOver(event:MouseEvent):String
{
return "hello";
}
trace(testOver());
View 3 Replies
Jan 21, 2011
I have a container with several movieclips in. I added an eventlistener to the container and on roll over i trace the e.target.name. The problem is when i roll over the e.target.name is the name of the container, while when i click the e.target.name is the target of the object inside the container. Anyone know how to solve this?
[Code]...
View 1 Replies
Feb 5, 2011
I have a custom cursor and I want it to change when you highlight a MovieClip, and return to its default value when the MovieClip is not highlighted anymore.I've used MouseEvent.MOUSE_OVER, MouseEvent.ROLL_OVER, MouseEvent.MOUSE_OUT, and MouseEvent.ROLL_OUT. The result isn't very smooth and there is a small delay to when the cursor changes. Also sometimes if you move the mouse fast enough the cursor won't change at all.
View 1 Replies
Feb 7, 2009
i want a flv to start when i mouseover a special location. i have placed a button there with alpha = 0, and with eventListeners for ROLL_OVER and ROLL_OUT.
the roll-out video is the same as the roll-on video, only it goes backwards.
so i want it to start seamlessly where the other one stopped as the mouse rolled out.
this is what i've done so far:
ActionScript Code:
play_btn.addEventListener(MouseEvent.ROLL_OVER, playVid);
play_btn.addEventListener(MouseEvent.ROLL_OUT, playVid);
function playVid(e:MouseEvent):void
[Code]....
it is very staccato, and on ROLL_OUT it removes the video totaly before it plays the out-video. so it's not seamlessly.
So is there a way to "pre-load" these two videos, so it appears as fast as a normal mouseover/mouseout on a button? And a way to keep the on-video on screen untill the off-video starts at its seek-point?
View 1 Replies
Oct 30, 2009
I want to create a button roll_over effect i as3, like the one you see on this link, when you roll_over the small pictures. The picture changes to the oicture you just rolled over and if you remove the mouse the picture you rolled over last stays. here is the link http:[url].....I have 3 buttons like this, and i would like the buttons to go back to their normal state when you roll_over the next button.
View 0 Replies
Nov 13, 2010
I have one movie clip that sits partially over top of another movie clip. The underlying movie clip has a ROLL_OVER effect on it. Is it possible for the mouse to somehow activate the ROLL_OVER only when the mouse cursor moves over a portion of the overlying movieclip when it's over top the underlying movie clip? In other words, the ROLL_OVER event should be triggered by the mouse cursor as through the overlying movie clip wasn't even there, when the mouse rolls over that area.
View 4 Replies
May 15, 2011
I have this animation where a tv screen has a static effect on it. This is the code of the tv animation:
[Code]....
View 2 Replies
Mar 31, 2010
I'm trying to create a website to display my architectural portfolio and I'm having troubles with a ROLL_OVER and ROLL_OUT EventListener. I have attached my fla file for you to look at to get have a better understanding of what I'm trying to explain.
What I'm trying to create are project thumbnails that when you roll over the thumbnail movieClip it will expand the other project thumbnails to the right allowing room for a brief summary. Also, the roll over will trigger a function inside the proj1 movieClip that plays the mc timeline, which simply removes a translucent colored layer (classic tween) to expose the project thumbnail in color. (You might want to reference the attached file) The problem I'm have is in the movement of the other thumbnail.
Problems are as followed:
A. When I roll off the thumbnail_mc the other thumbnails don't come back to their original locations.
B. The roll_over only works once. I would like to have it so that every time you roll over it, the proceeding project thumbnails should move to the right, and when you roll off, they should move back to the left to their original locations.
Now, I'm not sure if a if statement is the best way to move the other thumbnail or if I should use a tween. I tried some simple tweens off to the side, which you will see, but I can't get a addChild MovieClip to tween...I believe it has something to do with the instance name, which I'm not sure how to give an instance name to a movieclip that is a addChild...?
View 1 Replies
Feb 23, 2009
I have a movie set up in AS3. it is working with a swf that has a video loaded, a bunch of other external swfs. it all runs smoothly until half way through all of the rollover states just kill the browser. there are no errors in the flash IDE but they crash both IE and FF3
View 1 Replies
Oct 14, 2009
I have a web design for a client that was pretty much complete. They decided that they wanted to replace one of the graphics with a flash animation. When I added the swf file to the layout in Dreamweaver it apparently is adding some space around the swf which breaks the rest of the design. It looks to be about 4 pixels or so of space that is getting added. I experimented with padding, margins, borders on every element in the design. I tried changing the Scale parameter of the swf to "no border" and "exact fit". I tried enclosing the elements in a table. To simplify things I created a new blank page in Dreamweaver and added the two elements that are giving me grief. The original width of the design was 792.
On the top I had 2 graphics, the first was 212 wide and the second was 580 wide. The first graphic is the one that got replaced with the swf file. The swf is also 212 wide. But for some reason there is that extra space on the right side of the swf that forces the second graphic to the next line. You can see the example here: [URL]. This shows what happens when the original graphic was replaced with the swf. (The swf doesn't do anything as I actually replaced the client's swf with one I made that has the original graphic as the only item in the movie). If you look here: [URL]. I changed the width of the second graphic to 574 wide. That kept the graphic on the same line, but you can clearly see that the swf has the unwanted space to the right.
View 2 Replies
Apr 11, 2010
Problem embedding CS4 Flash Movie - Player 10. I am embedding a Flash Movie into an HTML doc. The doc was created in DW CS4 and has a table with 3 columns and 5 rows. Each cell will have content. I put a flash movie in the center cell, three rows down from top. Everything looks great in Safari. However, in IE, FF, and IE Chrome, there is space along the top and bottom of the movie -- have not tried the AOL browser. About 10 px each. I've tried everything to fix it. I published the HTML in Flash and tried integrating the generated HTML with my table -- same problem. Maybe publish settings could be tweaked.
I've tried 0 margins in CSS header tag, and HTML too. I thought I had this problem about a year ago with a different site ... been that long ... and resolved it.
View 1 Replies
Jun 30, 2009
I have a flv player on stage, along with several buttons. Everytime I press a button, I change the flv file played by the flv player.
I would like to make the transition seamless - since the last frame of the first video is identical to the first frame of the second video, the second flv would start right away.However, the flv player blinks between a video and another, probably because it is loading the local file.
View 1 Replies
Mar 15, 2006
I was working lately on this tutorial: http:[url]....and I wanted to make sth similar but a little more complicated (only in looks - not in code).Its sth like this: I got a sheet of paper with loaded .swf file on it (same as in that tutorial); then the sheet wraps itself (the .swf file on it disapears because the sheet is a MASK); when it is wraped another .swf file is loaded (cannot be seen yet); and at the end the sheet unwraps and the new contet (new .swf) is revealed.
And I got this problem: when the new .swf file is being loaded it appears for a half of a second (even if there is NO MASK on it - and it shouldn't be seen!) before even the sheet begins to unwrap and then disapears and everything is going ok. No code errors. Why do I have such effect of blinking on load ? It completely ruins the cool thing with wraping. Can you give me any advice ? There is no such thing in mentioned tutorial
View 6 Replies
Nov 24, 2010
This may seem trivial but for some reason I am having a difficult time getting the answer to this seemingly simple problem. I am trying to make an eye blink at random between 1-15 second intervals. I have a MC of the eye blinking, only 10 frames long, set on my stage (an outline of a head/face). On the first frame of the eye blinking MC labeled "Eye" I have this code:
stop();
random_number = Math.ceil(Math.random()*15000);
delay = setInterval(this, "play", random_number);
At first it seems like the code will work, then it appears to overlap itself over and over and over until the eye starts to blink rapidly without hesitation. Am I missing something? Or is the idea of getting this to work more complicated then it lets on...
View 1 Replies
Mar 31, 2004
How one can use AS for blinking text (as a MC) effect with optional blinking speed?
View 4 Replies
Jan 31, 2011
I'm seeing inconsistent ROLL_OVER behavior. I have two movieclips (A and B) both containing an alpha=0 hit area child mc (rectangle contained in a mc symbol with the symbol's alpha set to 0 in the parent). I add the same event listener in each parent A & B:
hit.addEventListener(MouseEvent.ROLL_OVER, onRollOver, false, 0, true);
function onRollOver(e:MouseEvent):void {
trace("Mouse Rolled Over");
}
In parent A, when the cursor is over the hit area as the clip appears (using TweenLite.to(alpha), the listener above triggers properly without moving the cursor. In parent B, I have to move the curosor in order for the above listener to trigger. Moreover, in parent B, when the eventlistener is attached to the hit child mc (as shown above) rather than "this" (parent B), I actually have to remove the cursor from the hit area entirely and re-enter the hit area for the above listener to trigger? The parent mc's are loaded differently. Parent A, which works more reliably (mouse doesn't need to move in order for the listener to trigger), is pre-loaded and made visible (.visible = true). Parent B is rendered on the fly in the timeline and is a child of three levels of parents/grandparents...
View 0 Replies
Mar 17, 2008
Is there a way to modify this tutorial to execute selectedItem on ROLL_OVER instead of click? I changed
lb.addEventListener(Event.CHANGE,itemChange);
to
lb.addEventListener(MouseEvent.ROLL_OVER, itemChange);
but when I rollover a list item I get: TypeError: Error #1009: Cannot access a property or method of a null object reference. at as3xml_finished_fla::MainTimeline/itemChange()
View 5 Replies
Mar 18, 2009
I am trying to create a container MovieClip with several TextField elements contained within it. I then need the TextFields to react to ROLL_OVER or MOUSE_OVER. This works fine if the fields are placed outside of the container, but not when I do
Code:
container.addChild(textField);
The TextFields are added after the container, and new ones may be created or removed later during the running of the movie. I've tried changing the value of container.mouseChildren but that didn't seem to make a difference.
View 3 Replies
Jun 10, 2009
I'm getting a flickering issue with my tool tip hovers. I've tried writing the code in 2 different ways and I'm still getting the same thingEach way seems to work fine if there's only one object, but when there are more than one and you start moving the mouse between the 2 this really annoying flickering keeps occurring? My file needs to have several objects which all overlap. I've tried altering the hit areas so that they don't actually touch - but no effect.
I've also tried swapping ROLL_OVER for MOUSE_OVER and MOUSE_MOVE but all with no results.
View 3 Replies
Oct 15, 2010
I have a simple menu movieclip with two buttons with Roll_OVER & Roll_OUT Functions. When IRoll_OVER & Roll_OUT on "home_1_btn" it works fine, but when IRoll_OVER "home_2_btn" it does notRoll_OUT?
Here is my AS3 that is PIN to the MovieClip
[Code]...
View 5 Replies
Mar 3, 2011
I am currently starting to learn AS3 and I stumbled on a problem which I can not solve myself. I searched for sollutions on the internet but nothing seems to be the solution I am looking for.
I am calling a movieclip from the library to stage stage multiple times. Then when its on the stage I want to add an roll_over and a roll_out effect to ALL the movieclips. I know that the problem of my code is in the part where I link the eventlistener to the movieclip because the name is not right. It only works on the last placed movieclip.
how to make it work for all movieclips?
here is my code:
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code].....
View 2 Replies
Mar 23, 2011
I have a little complicated set of ROLL_OVER and ROLL_OUT event handlers which are getting clashed.
I have following movieclip symbols on the stage:
Background
Bounds (child of Background)
Design (child of Background)
Circle1 (child of Background)
Circle2 (child of Background)
Design and Circle1 should get displayed when the mouse rolls over Bounds. Similarly, Circle2 should get displayed when the mouse rolls over Circle1. Circle1 and Circle2 are concentric and Circle2 is bigger.
Now, the problem is that, when the mouse cursor is rolled over on the common area of the two circles, the event handlers (ROLL_OVER as well as ROLL_OUT) of Bounds and Circle2 get called continuously.
I tried to get rid of the event handlers for Bounds under the ROLL_OVER event handler of Circle2 by using removeEventListener() but to no avail.
View 1 Replies
Jun 22, 2010
When I import a psd layered file I get an unwanted (red) border appearing around the art and as a box around the art. This doesn't exist in the psd file, but appears in the flash file. Should I convert and import it as something else? Is it a resolution setting in flash?
View 2 Replies
Oct 26, 2009
I have created a button for a homepage, and, to help designate it as "clickable," I have changed its background color on the Over through Hit stages.However, the background color change flickers instead of staying the changed color.Go to and hover over "Cirlces for Rice Field Days 2009" in the Spotlight box on the homepagethis is the flickering button.
View 1 Replies
