ActionScript 3.0 :: Swapping ROLL_OVER For MOUSE_OVER And Mouse_move But All With No Results?
Jun 10, 2009
I'm getting a flickering issue with my tool tip hovers. I've tried writing the code in 2 different ways and I'm still getting the same thingEach way seems to work fine if there's only one object, but when there are more than one and you start moving the mouse between the 2 this really annoying flickering keeps occurring? My file needs to have several objects which all overlap. I've tried altering the hit areas so that they don't actually touch - but no effect.
I've also tried swapping ROLL_OVER for MOUSE_OVER and MOUSE_MOVE but all with no results.
View 3 Replies
Similar Posts:
Mar 18, 2009
I am trying to create a container MovieClip with several TextField elements contained within it. I then need the TextFields to react to ROLL_OVER or MOUSE_OVER. This works fine if the fields are placed outside of the container, but not when I do
Code:
container.addChild(textField);
The TextFields are added after the container, and new ones may be created or removed later during the running of the movie. I've tried changing the value of container.mouseChildren but that didn't seem to make a difference.
View 3 Replies
Jun 27, 2010
I'm programatically dragging the play head back and forth along a timeline based on a mouse event listener. The faster the mouse drags the faster the playhead rips through the frames (it's linearly proportional). I'm also firing a starter=getTimer(); event at the inital mouse_move Event trigger (and only on the initial event) and then firing a ender=getTimer() at the end of the code that calculates the new playhead position, but only if the calculation has resulted in the playhead being told to move at least one frame (the mouse can move a few pixels before playhead will move one frame). In essence it's giving me a frame per second rate.
If I look a the delta of the two timers I rarely get anything but 0. Occasionally I'll get a 1 but not very often. There are a good few dozen heavy lines of code that need to be worked out between the initial mouse_move and the decision to move the play head, and this has to be done for a number of mouse position changes before the playhead will move at all and the second getTimer call is triggered. Does the mouseEvent trigger every ms or does it trigger at the frame rate (enterframe rate) of the doc. If so the smallest delta I should see is 31ms.
This runs as an app in the standalone swf player (10.1) and never in a browser.
Are my results indicative of this? Can the compiler really run this fast? How does one do very small timing tests that appear to be beyond the millisecond clock granularity?
View 1 Replies
Jan 22, 2010
I want to create a MovieClip button that when the mouse rolls over it, it scales larger and then when the mouse rolls out of it, it scales back to normal size.If i move the mouse cursor over and out of it slowly, the animation is fine, but if enter the mouse over it on one side and out on the other side or jerk my mouse around it acts as if the EventListeners and their respective Tween code has been reversed. I have even seen on occasion the square filling the whole screen.Here's my code:(this is written from memory and not copy pasted from flash, but before you say anything, I do have the proper imports for classes in the code so I wont include them here.
Code:
var yTween:Tween = new Tween(myMc, "scaleY", Elastic.easeOut, 1, 2, 2, true);
yTween.stop();
[code].....
View 2 Replies
Jul 9, 2009
I have a MovieClip (call it base_mc) which is under a bunch of other MovieClips (call them subclips). The MovieClips on top are all mouseEnabled with MOUSE_OVER, CLICK, etc, event handlers. I want to capture the event of MOUSE_OVER (or ROLL_OVER) on the base_mc as well. Any time I am over one of the subclips I am also over the base_mc clip. How can I capture this event?
View 2 Replies
May 19, 2009
I have been using hitTestPoint so far with mouse_move listener, which means if the mouse was stationary over target area when that listener was added the desired action wont happen until mouse moves.
Basically I have this window in the middle of the stage where loader loads pictures and when picture loads if the mouse moves over that window some other stuff appears.The listener is added after each picture is added and if the mouse was stationary above the loader when that happened it doesnt trigger hitTestPoint (until mouse moves).
I have seen somewhere this same effect, but it worked even if the mouse was stationary above the image when image appeared.
[Code]...
View 2 Replies
Nov 5, 2010
I've got a png sequence of a 3d object rotating on my timeline. My as3 find the mouse.x and uses math to choose which frame in the sequence to move to. I need to be add easing to the movement.
AS3 in use:
stage.addEventListener(MouseEvent.MOUSE_MOVE,findF rame);
function findFrame(event:Event):void{
var frame:int = Math.floor((stage.mouseX/stage.stageWidth) * 31);
gotoAndStop(frame);
}
View 1 Replies
Feb 7, 2010
I need to dispatch an event object when user stops moving mouse cursor. In poor words, i need the exatly opposite of a Mouse_Move event. Is there any solution or I need to create a event with EventDispatcher class?
View 5 Replies
May 26, 2010
i'm attempting to implement a mouse event where Mouse_Move can only occur if Mouse_Down. i could introduce a boolean that would toggle during Mouse_Down and Mouse_Up that could work, but is there a better way, perhaps a more official way, of doing this?
View 1 Replies
Mar 24, 2011
I have a disc I am rotating with the mouse with event.MOUSE_MOVE, like a jog wheel on some audio equipment. Everything almost works as expected, but the problem I am experiencing is that the disc always jumps to the point where the user clicks on the disc. I need the point on the disc that the user clicks on to remain under the mouse while the user spins the disc but I can't seem to come up with the correct math to make it happen. Here's the code i am using:
var xd = (_knob.x - _stageRef.stage.mouseX);
var yd = (_knob.y - _stageRef.stage.mouseY);
var radAngle = Math.atan2(yd, xd);
_knob.rotation = int(radAngle * 360/(Math.PI * 2) - 90);
_knob is a vector circle wrapped in a movieclip, with the circle centered on the movieclip's reg point. _stageRef represents the main stage.
View 1 Replies
Sep 15, 2011
why it scrolls down fine but when it scrolls up the first line of text falls to the middle of the pageContainer?the height of the pageContainer is 440 pixels.I cant get it to stop at the top of the pageContainer.It just keeps going up (into blank space)and the text keeps moving. Heres the code:
pageContainer.addEventListener(MouseEvent.MOUSE_MO VE, scrollPage);
function scrollPage(event:MouseEvent):void
{
TweenLite.to(pageContainer, 0.5, { y:-(mouseY/440)*pageContainer.height+stage.stageHeight/2});
}
View 2 Replies
Nov 6, 2009
I create an application that will work when users move the mouse and concurrently press the Ctrl key. But, it does not work if I did not first click on screen (application run on browser).
[Code]...
View 6 Replies
May 21, 2010
My code seems to be hearing a MOUSE_MOVE event when you click outside of the Flash stage (anywhere else on the page).
I have one listener for MOUSE_LEAVE (stage), which hides some overlay controls after a 500ms interval, and another (MOUSE_MOVE) to show them again when you move back over the stage. Yet the controls show again when I click anywhere outside of the stage.
I suppose I could add a Boolean for whether the mouse is over or outside of the stage (since I'm tracking that anyway), and *not* show the controls if its outside, but is there something else I'm overlooking?
View 3 Replies
Jun 23, 2011
what is meant by EnterFrame and it's use and how to declare it? And also the difference between EnterFrame and MOUSE_MOVE?
View 2 Replies
Oct 3, 2009
I have a module, which is a simple swf file to load.
Inside there, in a modules document class I have a code like:
ActionScript Code:
buttonMode = true;
useHandCursor = true;
[Code]....
When I load the module, I can see the drawn background with proper sizes. However, the cursor is not hand (useHandCursor) and mouse events are not dispatched. They are only dispatched on some children of the document class, not on itself, on its own background. ANd the hand cursor is only over the children, not over the document class' background itself again.
The document class of the module extends Sprite.
View 9 Replies
Mar 8, 2012
I'm listening for MOUSE_MOVE events.They are sent and received just fine unless the middle mouse button is held down. I don't get any more MOUSE_MOVE events until the middle button is released.Is this an issue with Flash, or something to do with my specific ouse/computer configuration (bluetooth Mighty Mouse on Lion)?Are there any known workarounds?Here is a sample project to demonstrate the problem.Left click and drag traces mouse move events, but middle click only shows middle mouse down and middle mouse up.
import flash.events.MouseEvent;
this.stage.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, onMiddleMouseDown);
this.stage.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown);
[code]....
View 2 Replies
Oct 21, 2010
Trying to use the MouseEvent.Mouse_Move event. Simply, there's one 300 x 20 line which the event is assigned and another line (100x20) is top of the first line. But if mouse moves over the second line, the event is not working... The same event could be assigned on the second line but it seems a bit waste and I'm sure there must be a way to trigger the event through the other object.
View 2 Replies
Aug 29, 2011
I would like to know how fast, flash player processes the Mouse movement? Does it process mouse movement at the same speed as the fps(frames/second) of the flash player .
For example for a function added as a listener to Mouse movement say, stage.addEventListener(MouseEvent.MOUSE_MOVE, mouseMoveListener); Does flash invoke this function 'mouseMoveListener' every time the mouse is moved? Is it done at the same speed at which the Operating system handles mouse move ? Or is it lesser? If so, then by what amount?
View 4 Replies
Jul 30, 2009
I have the following in a class and get an error message. CaseStudyQuiz is my constructor method. I want to detect when the mouse moves via the stage.addEventListener.
[Code]...
View 17 Replies
Feb 22, 2010
this is what I want.I have a MC whose color is set to Alpha 0 which is placed over an area where I want on ROLL_OVER the mouse to change to my custom cursor (which will indicate that a mouse click will "do something")this is what I have done.1. created a MC that will be used as my Custom Cursor with alignment sent to center/middle (or center sq. in the grid)2. I have exported it for AS
Code:
//roll over and roll out event handlers: (tgIcon_mc is the MC that I want to make active.)
tgIcon_mc.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);
[code].....
View 1 Replies
Jun 13, 2011
'm still rather new to AS3, I'm trying to make a roll_over scroll function however I've only got it to move a little bit each roll over, I'd like it to continuously do so until the mouse has come off the button area
Scripting:
reel_mov.x=14
r_button.addEventListener(MouseEvent.ROLL_OVER,right);
[code].....
View 7 Replies
Nov 11, 2009
Basically I'm creating two (can be more or less) rows of layered MC treaten as Buttons.In each MC there is a small thumbnail hidden behind a coloured layer. When roll_over the coloured layer, this alpha goes to 0(zero) and entire MC resize +10% over x and y.On roll_out the opposite occurs, everything should get to the original alpha and size.
The Problem: when moving the mouse really fast over the MC's and stop suddenly over one of them it starts 'blinking' (size and alpha goes in and out and won't stop unless you move the mouse a little)
ActionScript Code:
for(var i:uint =0; i<16; i++){
var miniPnt:MovieClip=new LittlePantone();
miniPnt.x=_xc;
[code]....
View 2 Replies
May 5, 2010
I have a problem with a mouseover-effect. I have a lot of different objects on my scene. Whenever the mouse is rolled over one of these objects, they will appear a bit larger until the mouse is moved again. I have made it work like this (and it functions):
package
{
import flash.display.MovieClip;
import flash.events.MouseEvent;[code]........
My problem now is, that I want to add another roll over effect:If the user rolls over one of the objects, it will appear a bit larger until he moves his mouse away, but if the user does not move the mouse for more than one second, a "pop-up window" (=New roll_over mouseEvent) has to appear, while the object STILL appears emphasised.So, how do I add a second roll over effect, which appears 1 second later?(the second roll over effect should be a png-image)
View 6 Replies
May 18, 2009
I cannot for the life of me figure out how to return a value out of a ROLL_OVER function. It seems extremely easy, yet I cannot get it to work. Here is a simplified version of what I am trying to do:
test_mc.addEventListener(MouseEvent.ROLL_OVER, testOver);
function testOver(event:MouseEvent):String
{
return "hello";
}
trace(testOver());
View 3 Replies
Jan 21, 2011
I have a container with several movieclips in. I added an eventlistener to the container and on roll over i trace the e.target.name. The problem is when i roll over the e.target.name is the name of the container, while when i click the e.target.name is the target of the object inside the container. Anyone know how to solve this?
[Code]...
View 1 Replies
Feb 5, 2011
I have a custom cursor and I want it to change when you highlight a MovieClip, and return to its default value when the MovieClip is not highlighted anymore.I've used MouseEvent.MOUSE_OVER, MouseEvent.ROLL_OVER, MouseEvent.MOUSE_OUT, and MouseEvent.ROLL_OUT. The result isn't very smooth and there is a small delay to when the cursor changes. Also sometimes if you move the mouse fast enough the cursor won't change at all.
View 1 Replies
Feb 7, 2009
i want a flv to start when i mouseover a special location. i have placed a button there with alpha = 0, and with eventListeners for ROLL_OVER and ROLL_OUT.
the roll-out video is the same as the roll-on video, only it goes backwards.
so i want it to start seamlessly where the other one stopped as the mouse rolled out.
this is what i've done so far:
ActionScript Code:
play_btn.addEventListener(MouseEvent.ROLL_OVER, playVid);
play_btn.addEventListener(MouseEvent.ROLL_OUT, playVid);
function playVid(e:MouseEvent):void
[Code]....
it is very staccato, and on ROLL_OUT it removes the video totaly before it plays the out-video. so it's not seamlessly.
So is there a way to "pre-load" these two videos, so it appears as fast as a normal mouseover/mouseout on a button? And a way to keep the on-video on screen untill the off-video starts at its seek-point?
View 1 Replies
Oct 30, 2009
I want to create a button roll_over effect i as3, like the one you see on this link, when you roll_over the small pictures. The picture changes to the oicture you just rolled over and if you remove the mouse the picture you rolled over last stays. here is the link http:[url].....I have 3 buttons like this, and i would like the buttons to go back to their normal state when you roll_over the next button.
View 0 Replies
Nov 13, 2010
I have one movie clip that sits partially over top of another movie clip. The underlying movie clip has a ROLL_OVER effect on it. Is it possible for the mouse to somehow activate the ROLL_OVER only when the mouse cursor moves over a portion of the overlying movieclip when it's over top the underlying movie clip? In other words, the ROLL_OVER event should be triggered by the mouse cursor as through the overlying movie clip wasn't even there, when the mouse rolls over that area.
View 4 Replies
May 15, 2011
I have this animation where a tv screen has a static effect on it. This is the code of the tv animation:
[Code]....
View 2 Replies
