I have a script which is giving me a lot of trouble since I have no idea how to write another "if statement" inside another if-else statement. I keep getting errors, I guess I don't know where to put the braces exactly...
example:
if(bla == bla) {
<------------how would I write another if statement here?
}else if (bla == bla){
}
why this code won't work
[Code]...
I'm sure you can put if statements inside other if statements, seriously I can't figure it out
I need to write an if statement inside an if-else statement. But no matter how I write it it keeps giving me a syntax error.The syntax error is "1083: syntax error: else is unexpected".[code]No matter how or where I place the braces, it keeps giving me errors.
View 13 Replieswrite a if/else statement. normally you would write:
Code:
if(condition){
//code
}else{
//code
}
but, as many of you might know, this would also work:
Code:
(condition) ? /*code*/ : /*code*/;
are there more of these alternative ways to write your code in actionscript?like for this problem:
Code:
trace("my name is: " + nameVar + ", and i like it!");
many programming languages have a nice way to enter variables in your string, like C:
Code:
("my name is: %d , and i like it!", nameVar);
if else statement I am trying to write for a gallery. I want to have it so if picture is on last one to go to first set on xml. Heres what I am writing it as:
Code:
function nextImage() {
if (p<(total-1)) {
p++;
[code].....
I have it written on my next image function because many things refer to that so check here then proceed to first set if on last. The problem is it stays on 4 or last item in xml. Can someone hit me with some insight.
'm trying to write an if/else statement for a mc button that says if mc is on stage don't attach it, else attach it.
View 5 RepliesIn my movie I load a swf to a movieclip with this code
PHP Code:
_root.ImageViewer.loadMovie("deneme.swf");
Now can I do this? before calling the swf named deneme. When I press a button If I attain a number to a global variable with this code
PHP Code: on (release) {_global.myVar = 5;gotoAndPlay("CloseUpAnimation");}
Can I read this variable from the swf which I load into my movie?If I can read how can I write a If Statement that will gotoAndPlay according to that variable?
PHP Code:[code]...
Having a few problems with what I thought was a simple if statement. Here is the code:
[Code]...
I can't quite figure out the small problem with the code. It seems to just bypass the first requirement of the if statement when I do type in the proper input and go straight to the else statement.
if (variable == 1){
//code
//Execute this code.
} else if (variable == 2) {
//code
[Code]...
I dont want to copy the code from the first into the second and the first and second into the third.
My mind isn't working and there is probably an extremelly simple way to get this working.
I know I could used functions but for some reason it stops the instance referencing working: _root["bullet"+j] doesnt work in a function.
The Flash movie contains 2 Text files, one Component button, and 1 component checkbox.The purpose of the application is to load an XML file(works)Populate 2 text fields with information from the XML file(works)Compare the two text fields, if they contain the same information then the checkbox, via AS is told to be selected. (Heres the problem);
Heres the code:
Code:
runCode_btn.onPress = function() {
data_xml = new XML();
data_xml.ignoreWhite = true;
data_xml.onLoad = function(success) {
[code]....
The idea behind this app is that its an electronic form. The user fills it out, the information is then sent to a newly created XML file, months later the open the XML file in flash, and Flash fills out text fields and check and or unchecks Checkboxes based on the XML data.CheckBoxes are mandatory.But I don't see how I'll be able to use them if i can't create and condition statements based on the loaded Data.
I am attempting to create what I call an 'On Air' rotator for a radio station. I would like to pull in an image file for each program when it is on air. I have the following AS 3 code that seems to work:
var now = new Date();
var day = now.getDay(); // Returns integer between 0 and 6
var hour = now.getHours(); // Returns integer between 0 and 23
[Code].....
The weekday programming is the same every day. We have some programs that are three hours in length. I would like to cut down on the number of statements I write. I am unsure how to combine the weekdays and have a range of hours in one conditional statement. Will the following work?
if (day >= 0 && day <= 4 && hour >= 6 && hour <= 10)
I'm attempting to express the condition "if the day is Monday through Friday and the hour 6 am to 10 am"
How i write the inline conditional statement in Flex with two expressions(case) [code]...
Flex compiler only check the first expression and on behalf of that give result.But i want to check both statement and show result.
what I'm trying to do is create an else if argument for each object in an array based on a user set number
Code:
for(var i:int=0; i < numberOfElseIfs; i++){
GENERATE AS3 CODE
}
to which I want it to GENERATE THE FOLLOWING CODE:
Code:
}else if(baskets[i].used == false){
baskets[i].used = true;
drawButton(i);
}
the problem is obviously that the compiler reads this code rather than understanding I'm trying to regenerate the code within the for loop...does that make sense :S? So basically I need as3 to read the code between the for statement as if it is going to echo that out later. Is this even possible?
[code]...
now when you first look at this code.. it looks perfectly fine right? .. well if you use this exact code and place a clip on the stage with an instance name of 'mc' .. publish and rollover 'mc'... the trace statement does not show.. is there something I never read about with respect of creating functions inside if statements??
I would think you could use the function name(){ syntax.. and not be forced to using variableName = function(){ syntax in creating functions inside if statements..
How do you get a True/False statement to be recognized inside a movie clip with a button on the main timeline as the control. I want my movie clip to stop at the last frame if the movie clip reaches the last frame. Otherwise gotoAndStop at the first frame of the clip. I was using
on (press) {
_root.m1.gotoAndPlay(2);
_root.m2.gotoAndPlay(1);
[code].....
I recently built a preloader using the MovieClipLoader object. I used the following events: OnLoadComplete, OnLoadProgress and onLoadStart. I registered my listeners etc and then I decided I wanted to get a bit fancy. So I decided that within the onLoadProgress I would add an"if" statement, this if statement would basically say if the loaded content equals 70 then animate the preloader graphic off the screen using tweening (very simple). The onLoadProgress is continuously called while the content is being loaded but it seems that it does not want to correctly execute my if condition.
Here is the code for the onLoadProgress.
loadListener.onLoadProgress = function (target:MovieClip, bytesLoaded:Number, bytesTotal:Number) {
trace("onLoadProgress");
txtLoaded.text = String (Math.floor (bytesLoaded / bytesTotal * 100)) + "% loaded";
mcProgress._xscale = bytesLoaded / bytesTotal * 100; // address the bar
[Code] .....
I have a movieclip on the screen called "mc_bg". Within this movieclip are 7 movieclips called "barrier1" through "barrier7".From main.as I want to be able to do this call:
for (var i: int = 1; i < 3; i++ ){
trace("got here")
trace(mc_bg["mc_barrier" + String(i)])
[code]....
Is it possible to use a if statement with a eventlistener in it?
eg
if(myBut_btn.addeventlistener(MouseEvent.CLICK)){
[code]....
So I've been reading a lot today about the with statement performance, readability and stuff like that but i'm still not sure whether i should or should not use the with statement in AS3.
Using the with statement seems the same as creating local var which would carry the reference.
I am sending my header location to some variables in flash from my php page.For example when i am in the homepage then the header is:
&from=sitemap&product_id=1
What i want to do is tell the flash to go to one frame if it is the homepage and to another for any other value of products_id.What i have in my actionscript is this:
Code:
var prod_num = product_id;
if(prod_num == 1){
gotoAndStop("s1");
} else{
gotoAndStop("s2");
}
It is getting the product_id....but for some reason it always goes to frame name "s2".
ive got an array of cards 2-10 plus jack, queen, king, ace and i'm pulling members from the array at random--in order to score it, i decided to check the first character of the string and see if it returns a number or not.if it's a number, add the number to the score, but if it returns 'NaN' (not a number) then it will just add 10 to the score--so even tho NaN is defined as a variable in flash, somehow my if statement 'char==NaN' isn't working...
PHP Code:
[code]....
I'm using a for-statement to add a series of movieclips.
for (var i:Number = 0; i<10; i++) {
attachMovie("myMC", "myMC"+i, this.getNextHighestDepth());
}
Inside the movieclips I have some code. In this code I need the index-number of the movieclip. I'm staring the code off with: var indexr:Number = _root.i; The for-statement is so fast that all the movieclips get number 9 in the index-variable! Is there any trick to manage this, like can I get the index from the name in some way? Or do I have to work around it in some more or less complicated way?
Is it possible to have more than one condition on an if statement?eg. if something is black and if it is 40cm then do the following..both conditions must be fulfilled before the action can occur.
View 3 RepliesHow would you use an if statement to say if you're on a certain frame do this.
if(frame is # 2){
something = true
}
if(frame is # 1){
something = false
}
I'm about to start a game/quiz project where the user must click several buttons, one after another (though not in any special order) to answer a question:[code]Is this the right approach and way to add variables in an if statement?
View 1 RepliesI have been asked by a local web development company to code some flash banners for use with there banner ad site they are doing. I have been sent a banner to add the actionscript and also the actionscript as well. What I have is a fla doc with a button that covers the whole banner. Then on the banner I have this actionscript:-
this.masterButton_but.onRelease = function(){ if (root.Hyperlink != null){ getURL(root.Hyperlink); }else if(root.clickTag != null){ getURL(root.Hyperlink); }else{ getURL("http://www.greatrun.org/Events/Event.aspx?id=3"); } }
When I test it the compiler errors and says in the description "Statement must appear within on handler".
on my main timeline i have a movie clip called "screen" within that i have a dynamic text box for inputing a number. var for text box is txt_1
on the same timeline i have another mc called "animation" withing that i have a mc called "prizes" there are 2 animations in the prizes movie clip that are supposed to run based on the if statement...i have an action assigned to the prizes as below:
//this.onEnterFrame = function () {
if (_root.screen.txt_1 == "11111") {
prizes.gotoAndPlay('prizes1');[code]........
but this is not working...basically i want to say that is the text that was inputed was "11111" play the first prize animation inside the "prizes" mc, and if its "22222" play the second prize animation in the "prizes" mc.what am i doing wrong?
i am working on a project where i am using the attach movie to load a clip from the library..
Actionscript Code:
regionListener.change = function(){ attachMovie(_level0.frameName + cbRegions.value,"clip",2);
Now i need to hide the sample_mc that is already on stage only if a clip is loaded... on the else statement sample_mc should be visible again..So...i dont know how to say that in AS2 language...
Actionscript Code:
If clip is loaded , sample_mc._visible = false; else sample_mc._visible = true;
I keep getting the "statement must appear within on handler" error when I try to add a gotoAndPlay event to my button...
View 3 RepliesDoes it exist in actionscript a between statement? If I would search for a value that is more than 2 but less than 4. Is there like a >2<4 statement I could do?
View 1 Replies
