I'm trying to get a button that I made, which is in a different movie clip, to change the video in the video list.[code]The button instance name is "v1btn" and it's in the movieclip instance name "menuBtn"
View 11 RepliesI placed a movie clip instance inside a button, and I want this movie clip to play when the button is released. I'm using this code on the frame containing the button:
function playMovie(event:MouseEvent)
{
this.theButton.theMC.gotoAndPlay(3);
[code].....
So I have a code, shown below:
[Code]...
and I want to add multiple buttons, not just this one. I figured out by trial and error that I couldn't just consecutively list the instances, I also found I couldn't just replicate the code and change the instance names. I just need to know how to go about having multiple buttons/clips.
I have a simple movie clip that animates some text and a divider bar. The clip loops which is normal, I want to add a stop action to stop the loop.I have three layers; text, divider_bar, and actions. On the actions layer I placed stop(); on the last frame. This stops the movie clip just fine. But if I rewind and play it again the movie clips stays on the last frame and wont restart. I'm using Action script 2 and have even tried using as 3 with out any luck.
View 3 Repliesmy movieclip doesn't behaves as a button when i try to use this
[Code]...
i want my movieclip to behave as a button and at the same time to load a page after clicking on it (this code loads a page and i cant delete it and use another.i just can add something into it to make this movieclip move.)
I want to Jump a Movie Clip When I pressed a Control Key. What will be the code.
View 3 RepliesI am trying to load a movie clip in a RollOver action inside another movie clip, but I have 2 problems:
1. If I do it with loadMovie("movie.swf") I cannot go back to my previous instance when the movie stops playing, but if I do it with the loadMovieNum("movie.swf", 1), it gets back to the previous instance, but it leaves that instance behind, so it keeps appearing all the time on the back.
2. Even though I see the swf when I publish it from Flash, when I insert the swf in Dreamweaver, I cannot see the swf that I loaded in layer 1. I only see the first layer and nothing happens when I RollOver.
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesI am not sure what is the difference between externally and dynamically loading pages, but I have created swf files for each of my pages and then a main page that those swfs get loaded into. The problem I am having is: I have transitions between my pages and my movie clip will animate when it is in the page swf, but not when it is in the main file.
View 0 RepliesI am making a thing on my flash animation with a 3d planet spinning. When you move your mouse over it the planet will stop and contact info comes up, and when you rollOut the planet continues spinning and the contact info fades away. I have everything working but i cant get the planet to stop spinning when i do this because the button controls the fade but the planet is just spinning in the backround, hard to explan. Anyways i need to be able to send a stop and play action to the planet movie clip behind the button to stop. i need to send an action from Scene 1>universal>destinationclip>world. from a keyframe on the destination clip.
View 2 RepliesI have a button action not working to control another movie clip timeline. The movie clip timeline I want to control has an instance name but for some reason it's not playing. The button is on a different movie clip timeline. Both movie clips are on Scene 1. I think there is something wrong with my target path?
on(release){
_root.insMcWorkNav.gotoAndPlay("lbWork04");
insMcWorkNav is the movie clip, lbWork04 is the frame to play
This seems a very basic question, but googled for long time... I have a movie clip, at Frame 3 there is only one line of code: stop(); My question is: how can I add it through AS? The instance name is my_mc, more specific, how to refer to the Frame 3 of my_mc?
Another question is the same. The movie clip has two frames, frame 1 is blank, at frame 2 there is a button. After attachMovie, get my_mc, trace my_mc, it is there, trace my_mc.my_button, it says undefined. How can I refer to my_button at frame 2? Then I can define onRollOver function for it.
I am currently working on an assignment that requires me to add sound to a mobile game. This is fairly straightforward in many ways but I wondered if there was any way that I could add multiple sounds to a single movie clip or action?
What I really want to do is to have say three or four different sounds for the sound of a spaceship exploding in the game to create variety and stop the gamer getting bored of the same sound every time they hit a spaceship.
i created a bouncing ball effects with as2 .it shows 8 ball bouncing each other and moving. now i need is when i click on each ball it should display ball1, ball2, ball3 ..etc to a text box. when i put this code
on (release) {
trace(this)
}
[code]......
how to get rid of an instance of a movie clip in the following Scenario. I have tried several methods, e.g., setProperty _visible to false, and the setProperty _scale to 0 (below). But none of these methods really get rid of instance; it merely hides them.
if (_root.yellow, hitTest(_root.wall)) {
speedx = 0;
speedy = 0;
[Code]...
I am creating dynamic Movie Clip using as3, but I don't have any idea about dynamic Instance name, how I can assign Instance name for a movie clip.
View 1 RepliesIs it possible to check if a button instances is available on a certain frame?
i.e.
Frame 1 has the following movie clips
a_btn
b_btn
c_btn
Frame 2 has the following movie clips
a_btn
c_btn
I want to check if buttons a, b, c is available on Frame 2 and run a corresponding function if condition 1 or condition 2 is met
I know reverse movie clips have been discussed a million times before but I gues I'm jsut stupid and can't figure it out. I have an instance of a movie clip on my timeline that I want to play on mouseover and start going in reverse on mouse out. How do I do it?
View 2 RepliesI want to give a whole mc and instace name. the mc contains multiple moving images.
View 4 Repliesis there a way to set the depth of a movie clip instance that is on the stage, ie. not created via createEmptyMovieClip, attachMovie, duplicateMovieClip and so on? Something like
View 5 Repliesi need to do to add more than 1 instance of a movie clip to a slideshow, the actionscipt i have so far is below;
this.createEmptyMovieClip("theScene", 1);
theScene._x = 150;
theScene._y = 100;
objectsInScene = new Array();
focalLength = 500;
[Code]...
I want to load an instance into a empty movie clip on my scene1. On scene1 I have an empty movie clip empty_mc. In my library I have a jpeg I converted into a symbol. I through the symbol onto stage1 and gave it an instance name of jpeg_1. I want the empty Movie clip to load jpeg_1. I thought it was something like this.
stop();
loadMovie("jpeg_1","empty_mc");
I have an issue while trying to create an instance of a movie clip, in order to rotate it dynamically. How can I have a variable of type myMovieClip in which I can invoke the _rotate method?
View 1 RepliesHow do I access an object (in this case a button) within an instance of a movie clip on the stage?Basically I want to listen for a button (but_1) within the movie clip instance (menu_bar_1) which is set on the stage of my main movie.I want to use that same movie clip in several different parts of the main file, and each time the button will play a different sound.
View 1 RepliesI thought this would be a simple one, but i am stumped. So I resulted to using this less than optimal solution, just to get it working...
if (lobby.gamemap.selectedItem.label == "Map1") map.AddMap(new Map1)
else if (lobby.gamemap.selectedItem.label == "Map2") map.AddMap(new Map2)
//Map1 and Map2 are movie clips in my fla library, with linkage Map1 and Map2
[code]........
ActionScript Code:
myVar.addEventListener(MouseEvent.MOUSE_OVER, dothis);
function dothis(event:MouseEvent):void
{
myVar.gotoAndPlay("rollover");
}
I have a hundred instance of a movie clip on the stage. I would like to use "myVar" to store the name of the instance that the mouse is currently hovering over, so the function will run for that instance.
how to dynamically assign the instance name to myVar on MOUSE_OVER?
I need to make movieclip carbondot and its actions automatically duplicate into a new instance after being dragged, but my current coding for carbondot isn't working:
ActionScript Code:
onClipEvent (load) {
this.onPress = function() {
[code]....
I've got a map, of those you roll over the mouse on the sections and it displays the section name.I want to add to these code, the instance of changing the colour of the section, so sections are more visible each time you move your mouse over the map.[code]...
View 7 RepliesI have four movie clip instances inside an instance. ("root" or "stage" > mcInstance1 > mcInstance2)
I have my actionscript codes enterd on the first frame of the mainTimeline.but my knowledge on actionscript 3 is so short I couldn't control the mainTimeline from the instances which I have created as buttons by actionscript coding.Here's what I'd like to do: When one of the movieclip instance is clicked and onEnterFrame,I want another movie clip instace to play which is on the mainTimeline (or "root" or "stage") on top of everything.I even tried to loadMovie and addChild to the stage onEnterFrame of the movieclip instance, but since it does the loadMovie inside instance stage, it appears only on top of the same movie clip instace and not on top of everything else.how to control a movie clip instance on mainTimeline inside the movie clip instance onEnterFrame in AS3.
Building a dynamic map that displays State Senate districts for a US State. Each district is a movie clip that I want to manipulate from a ColorTransform perspective on the flash map. The data that drives the map is being pulled from a php/mysql script. I have built out the actionscript up to the point of being able to trace the name and desired highlight color of the Senate district passed from the php (the passed name corresponds to the movie clip instance name of the district on the flash map). The traces work fine as far as the values of the data passed, one field is the district and the other is the color for the transform. The .as file compiles on the test, but will not treat the variable name used for the passed district as anything other than a String. I get an Error #1069: Property transform not found on String... Have gone through adobe reference pages and have tried every method of type conversion I could find to no avail. I get coerce errors on most attempts to force the String to be an Object.
[Code]...