I'm struggling through trying to learn the new tween system. Is it just me or did they completely NUKE workflow with this new system? Is there any way to copy and paste the property keyframes?I often have animations where things loop, so the last frame of the motion tween needs to be the same as the first frame. In the old days I would just select and copy multiple keyframes from frame 1 and paste them at the end. Done in 5 seconds. The only way I can find to do this now is to hand set every freaking property on every freaking keyframe of every freaking object.
I recently migrated from CS3 to CS4, and have a question about the "Motion Editor". In principle it sounds fantastic, but I can never get it to work on any of my fla files. The tab is there, but when I select a tween span in any of my files, the Motion Editor continues to say "to edit properties, select a tween span in the timeline or a tweened object in the document." Nothing I do can get the Motion Editor to show anything but this.
Is this because the Motion Editor works only on tweens in new fla files created in CS4? (My existing files were all created in CS3.) Very frustrating, as I would like to use this new feature. I tried to get it to work in a new CS4 file, creating a tween and going to the Motion Editor tab, but.
"How do I get the motion editor to show easing controls"?
I've just made my first flash movie in flash cs4 and I wanted to add easing to the (classic) tweens I created. I tried selecting the first graphic, then I tried selecting the (classic) tween span, but each time I go into the motion editor it just says "To edit properties, select a tween span in the timeline or a tweened object in the document".
iam new to Flash CS4 and for some reason i cant scrub the playhead when in the motion editor window? if i press on the playhead it only moves to next dot on motion timeline, like a snap motion.
The playhead in Motion Editor doesn't work and I'm seeing in tutorials.I can't scrub it along the timeline.When I pick a keyframe point it doesn't appear there unless I change the value of that point. If I then click on the playhead rectangle, the playhead disappears (actually it appears to jump to the first frame where it's half visible and can't be moved).I was playing with the motion editor interface trying to better define the problem and I figured out what's wrong.
The Motion Editor values for graph size, expanded graph size, and viewable frames were unusable in their default settings. In particular, viewable frames were set to 1 by default. As I increased the value the playhead started to function. I can't set a value higher than 117. I've maxed-out the graph size setting at 180 (300" wide format display) and the expanded graph size at 200.
I really like the motion editor in CS4. A lot is easier than before, particularly working with ease. But I wounder how you use the custom curve when having a complicated motion with a lot of keyframes. In programs like AE it's easy to select a key and tell if it's going to be a easy in/out or both, and then I select next key and tell how that key should ease. In Flash CS4 I allways get a easy curve that range the entire tween. Is the workflow to brake everything apart so you tween every single motion, or is it another way doing it?
I've been using the motion editor for my Motion Tweens, but as you probably know, I can't use the motion editor on a Shape Tween. Is there no way to do this? I just want it to slowly ease in.
I'm trying to access the rotationY property in code to determine the current state of a movie clip that has its rotationY animated in the motion editor. What I'm seeing is that the value of the property reported in a trace stmt is different than the value shown in the motion editor.
In the motion editor I created a tween from rotationY=0 at frame 0 to rotationY=353 at the last frame. I've added the attached code to get the value of rotationY at every frame.
What I see is that the rotation does not increase steadily from 0 to 353. Instead it increases from 0 to 90 and then decreases back to 0 and then goes negative to -90 at which point the absolute values decrease toward 0. This seems like a bug. The rotation of the object is visibly different during the 0 to 90 deg
I recently installed Flash CS4. As I attempt to learn from different tutorials I've run into a problem I can't figure out. I've watched the video tutorial at: [URL] several times to try to emulate the rotating logo. The problem I run into is when he says to open the Motion Editor and to edit the Rotation Y and Rotation Z properties. When I open my Motion Editor there is no Rotation Y or Rotation X. There is only a Rotation Z property. I've played it over and over to try to discover what setting I've missed but don't see it. How do I see a Rotation Y property to be able to edit it?
Is it just me or is creating and applying custom easing with the motion editor absurdly difficult? Firstly, the bezier curve tool for custom easing has a mind of its own. It will change the curve at a different anchor point to the one you're editing on a whim and every time you get close to where you want the curve it does it again and you're back to square one. Second, you have to recreate a custom ease for every tween as there's no way to save them. It's impossible to create two custom eases exactly the same! The entire motion editor seems designed to infuriate me and parts of it don't seem to have been tested at all.
Why are the scale x and y options grayed out on the motion editor? I tried editing width and height (W&H) in the "properties panel" under "position and size" and all that does is move the position my object diagonally for some reason, not scale the size. Also, when i do this, the Width number does not change, but the x and y position numbers above it change. Strange!
I'm working in Flash CS4 and I can't see my timeline (or playhead) in the Motion Editor.I've never experienced this before and have no idea how to remedy the issue
I was playing around with Flash cs4 on the motion editor, and I changed some number at "exanded graph size" from 200 to 150, and the entire motion editor became empty!
I have scoured the web reading tutorials and lots of them discuss getting an object from point a to b.I simply want to move an object from left to right (no problem) pause for 20 frames, and then drop down.
I can accomplish it a few ways but it seems to involve way too many cryptic steps. One solution is fairly easy to implement but the resulting timeline visualization is really poor.[code]...
I have been working on this banner ad using motion tweens (with scaling) for four objects, three road signs and a background. Sometimes it runs very smoothly, but most of the time, the four objects run in a very jagged way? Does it have to do with four motion tweens happening at the same time?
I'm brand new to Flash (started last week). Playing with motion tween editing and thought I understood the difference between using the selection versus sub-selection tools.BUT...... Under certain circumstances (and I haven't been able to get a "handle" on what those circumstances might be), I seem to get a control point on EVERY frame, whether a key-frame exists at that point or NOT on the TL (also, whether I got the sel or sub-sel tool selected makes no difference).
Is there a way to move multiple frames in the motion editor (CS4)? Like now I have to move them one by one and it's hard to make them keep their values coz the shift+move doesn't seem to work.
Everytime I try to make a change by scrubbing a number in the motion editor, the program crashes with no explanation as to what went wrong. How do I stop this from happening? I was viewing an online video tutorial when it happened. If it helps, here is some information about my computer:
I've tried searching but have not succeded in finding an answer, I just hope i'm not asking something that has already been answered.ANyway , here I go.For some reason the filter option is greyed out in the motion editor ans i don't understand why, and I was hoping someone would be kind enough to enlighten me on the matter?Could it have to to with the fact that i'm apply ing the motion tween to a graphic symbol with an imbedded animation ? Should i change it to a movie clip?
When I first started playing with the new motion tweens I realized that you cannot copy keyframe "properties" on multiple layers at once. You have to copy them one at a time. But I just found out that if you select the multiple property keyframes you can hold Alt and drag to duplicate them all at once.
so i watched the tut on motion tweens on how to change the color of stuff, but i guess im doing something wrong because its not working.are there step by step directions i can follow? also how would one change the color of a gradiant over time?
I am fairly new to flash and I'm currently using CS4 to create shape tweens that morph from a shape (in my case an astroid, not to be confused with an asteroid) to text that I have broken apart into individual shapes. This works very well with the shape tweens; however, I would like to use symbols instead of shapes for my tween.
Naturally, I converted my shape and my broken apart text to symbols and then set up a motion tween. My research has told me that you cannot morph from one symbol to another using ANY tween, but this would not make sense to me.
Am I missing how to actually do this? If it is true that you cannot morph between symbols, then why on earth hasn't Adobe made a way to do this. If I need to substitute one shape for another in a flash video, and I have this shape in 100s of frames in the video, there is NO way to quickly find and replace those shapes, especially if you've duplicated the the several (20) times in each frame.
I have a problem, which I couldn't solve. I made three motion tweens. One is the background, which slides in from left. Another one, is a car, which goes in the scene from right. The two visible wheels of this car are spinning too using a motion tween. The problem is that all these motion tweens keep looping. I would like to let the background and the wheels of the car loop forever, but I want the car to come in from right and stop on the left. When I tried to stop it, it stopped the car, but unfotunately it stopped the background too. How could I manage to let the background and the wheels of the car loop, but stop the car in a position?[URL]
I am trying in CS4 to change visibility of some motion tweens using AS2 _visible=true and _visible=false ( I need to stick to AS2)I am able to successfully target the motion tweens that are not masked, but I can not target the motion tweens that ARE masked. The masks lie directly over the tweens within the same movie clip as the other tweens.
I'm trying to create 2 separate motion tweens - between frame 1 to frame 35 and frame 36 to 65 but it just won't work.
From frame 1 I want a motion tween to frame 35. We shall call the graphic in frame 1, graphic 1 and frame 35 graphic 2.
Graphic 3 represents frame 35 and graphic 4, frame 36.
When I make a motion tween from frame 1 to 35, it overwrites graphic 3 and 4 with Graphic 1. It will not allow me to put graphic 3 into frame 35, only graphic 1. If i put it in, it will automatically swap.
When I make a motion tween from frame 36 to 65, it works. But then when I try to make the motion tween from frame 1 to 35, it swaps it over.
I'm just now trying the Motion Editor for the first time in CS4 Professional. I've created a shape, converted it to a symbol, done an Insert Motion Tween, and brought up the Motion Editor. I'm looking for Rotation X and Rotation Y, but only see Rotation Z. My Publish Settings are Flash Player 10, ActionScript 3.
When I try to insert a keyframe in Motion Editor, Flash CS5 crashes.I tried to use two computers running the same Mac OS X 10.5.8 with the same specs and only one of the machines crashes.
I have a shape on a layer and I have used a bunch of motion tweens on it. I need to dynamically move that shape but I can not figure out a way to accomplish this. Have I painted myself into a corner with this one?
having a problem with targeting multiple motion tweensin Flash CS4. I am using AS2 and attempting to change thevisibility of eight separate motion tweens (visible false and thentrue). I want to be able to affect each tween separately. I amlooking to activate visibility as follows:
if (triggerclip._currentframe == 2) { sword._visible=true; }
I'm making a dropdown menu (first time) and the motion tweens are... well they're being weird. There is not arrow on the frames where the motion tween is. And the drop down menu is not appearing... However, there is definitely a motion tween on those frames, but no motion is occurring...
