I've been using the motion editor for my Motion Tweens, but as you probably know, I can't use the motion editor on a Shape Tween. Is there no way to do this? I just want it to slowly ease in.
View 6 RepliesI will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 Repliesmy movieclip button was working perfectly as a motion tween. Can you use shape tweens as movie clip buttons? I just made that change, and kept my code:
[Code]....
I am facing a problem in one of my animation with flash CS4 - I have nested a Shape Tween in a Motion tween to get more control over the easers and effects, unfortunately I am not able to view on the timeline of my Motion Tween the action of the Shape tween nested inside.
It only show the first shape of the Shape Tween during the entire Motion Tween and that is really a problem for me because I need to see the final frame result of that Shape tween to be able to position it in a precise way on my scene according to other instances.
[Code]..
i put a shape tween on the timeline that shrinks a shape a certain number of pixels in a given time. my problem is that it shrinks too smoothly in the movie! I need it to shrink in a step by step fashion, and i'd like to be able to specify the number of steps. i'm hoping that there's a simple parameter that i can use to do this. or may be there would be a way to slow down this tween? by changing the fps locally without effecting the rest of the movie? i will need a solution that will work for motion tweens too, but imagine that the principle will be the same also, as a second question, is it possible to tween a bitmaps tint color style so that it changes from say red to green over a number of frames?
View 5 RepliesIt is very frustrating to move the diamond shape of the motion tween or to even delete an unwanted diamond shape on the timeline.
View 9 RepliesIf I have made a motion tween on an object on a level I can't then in the frame right after the motion tween make any Shape Tween on the same level and object.
View 0 RepliesI would like to create a polygon that changes its shape (circle, trapezium, square, rectangle, triangle) based on specific buttons that the user clicks? An existing shape has to be able to morph into all the others. For instance, the trapezium has to morph to a square, circle, rectangle or triangle.
If I were to create each transition manually, I would end up with 5x4=20 scenes. Is there a way that I can just assign each shape to its own frame, and deploy actionscript to set in motion the transitions from one frame to the 4 other possible frames? I am very grateful to anyone to just point me in the right direction,
I recently migrated from CS3 to CS4, and have a question about the "Motion Editor". In principle it sounds fantastic, but I can never get it to work on any of my fla files. The tab is there, but when I select a tween span in any of my files, the Motion Editor continues to say "to edit properties, select a tween span in the timeline or a tweened object in the document." Nothing I do can get the Motion Editor to show anything but this.
Is this because the Motion Editor works only on tweens in new fla files created in CS4? (My existing files were all created in CS3.) Very frustrating, as I would like to use this new feature. I tried to get it to work in a new CS4 file, creating a tween and going to the Motion Editor tab, but.
I'm struggling through trying to learn the new tween system. Is it just me or did they completely NUKE workflow with this new system? Is there any way to copy and paste the property keyframes?I often have animations where things loop, so the last frame of the motion tween needs to be the same as the first frame. In the old days I would just select and copy multiple keyframes from frame 1 and paste them at the end. Done in 5 seconds. The only way I can find to do this now is to hand set every freaking property on every freaking keyframe of every freaking object.
View 1 Replies"How do I get the motion editor to show easing controls"?
I've just made my first flash movie in flash cs4 and I wanted to add easing to the (classic) tweens I created. I tried selecting the first graphic, then I tried selecting the (classic) tween span, but each time I go into the motion editor it just says "To edit properties, select a tween span in the timeline or a tweened object in the document".
iam new to Flash CS4 and for some reason i cant scrub the playhead when in the motion editor window? if i press on the playhead it only moves to next dot on motion timeline, like a snap motion.
View 1 RepliesIf I perform a motion tween along a curved path, Flash CS4 does not allow to change the curves to "corner point" or "linear" in the motion editor. URL...
View 2 RepliesThe playhead in Motion Editor doesn't work and I'm seeing in tutorials.I can't scrub it along the timeline.When I pick a keyframe point it doesn't appear there unless I change the value of that point. If I then click on the playhead rectangle, the playhead disappears (actually it appears to jump to the first frame where it's half visible and can't be moved).I was playing with the motion editor interface trying to better define the problem and I figured out what's wrong.
The Motion Editor values for graph size, expanded graph size, and viewable frames were unusable in their default settings. In particular, viewable frames were set to 1 by default. As I increased the value the playhead started to function. I can't set a value higher than 117. I've maxed-out the graph size setting at 180 (300" wide format display) and the expanded graph size at 200.
I really like the motion editor in CS4. A lot is easier than before, particularly working with ease. But I wounder how you use the custom curve when having a complicated motion with a lot of keyframes. In programs like AE it's easy to select a key and tell if it's going to be a easy in/out or both, and then I select next key and tell how that key should ease. In Flash CS4 I allways get a easy curve that range the entire tween. Is the workflow to brake everything apart so you tween every single motion, or is it another way doing it?
View 1 RepliesI'm trying to access the rotationY property in code to determine the current state of a movie clip that has its rotationY animated in the motion editor. What I'm seeing is that the value of the property reported in a trace stmt is different than the value shown in the motion editor.
In the motion editor I created a tween from rotationY=0 at frame 0 to rotationY=353 at the last frame. I've added the attached code to get the value of rotationY at every frame.
What I see is that the rotation does not increase steadily from 0 to 353. Instead it increases from 0 to 90 and then decreases back to 0 and then goes negative to -90 at which point the absolute values decrease toward 0. This seems like a bug. The rotation of the object is visibly different during the 0 to 90 deg
I recently installed Flash CS4. As I attempt to learn from different tutorials I've run into a problem I can't figure out. I've watched the video tutorial at: [URL] several times to try to emulate the rotating logo. The problem I run into is when he says to open the Motion Editor and to edit the Rotation Y and Rotation Z properties. When I open my Motion Editor there is no Rotation Y or Rotation X. There is only a Rotation Z property. I've played it over and over to try to discover what setting I've missed but don't see it. How do I see a Rotation Y property to be able to edit it?
View 2 RepliesIs it just me or is creating and applying custom easing with the motion editor absurdly difficult? Firstly, the bezier curve tool for custom easing has a mind of its own. It will change the curve at a different anchor point to the one you're editing on a whim and every time you get close to where you want the curve it does it again and you're back to square one. Second, you have to recreate a custom ease for every tween as there's no way to save them. It's impossible to create two custom eases exactly the same! The entire motion editor seems designed to infuriate me and parts of it don't seem to have been tested at all.
View 15 RepliesWhy are the scale x and y options grayed out on the motion editor? I tried editing width and height (W&H) in the "properties panel" under "position and size" and all that does is move the position my object diagonally for some reason, not scale the size. Also, when i do this, the Width number does not change, but the x and y position numbers above it change. Strange!
View 3 RepliesI'm working in Flash CS4 and I can't see my timeline (or playhead) in the Motion Editor.I've never experienced this before and have no idea how to remedy the issue
View 3 RepliesI was playing around with Flash cs4 on the motion editor, and I changed some number at "exanded graph size" from 200 to 150, and the entire motion editor became empty!
View 1 RepliesIs there a way to move multiple frames in the motion editor (CS4)? Like now I have to move them one by one and it's hard to make them keep their values coz the shift+move doesn't seem to work.
View 3 RepliesEverytime I try to make a change by scrubbing a number in the motion editor, the program crashes with no explanation as to what went wrong. How do I stop this from happening? I was viewing an online video tutorial when it happened. If it helps, here is some information about my computer:
[Code]...
I've tried searching but have not succeded in finding an answer, I just hope i'm not asking something that has already been answered.ANyway , here I go.For some reason the filter option is greyed out in the motion editor ans i don't understand why, and I was hoping someone would be kind enough to enlighten me on the matter?Could it have to to with the fact that i'm apply ing the motion tween to a graphic symbol with an imbedded animation ? Should i change it to a movie clip?
View 1 RepliesI'm just now trying the Motion Editor for the first time in CS4 Professional. I've created a shape, converted it to a symbol, done an Insert Motion Tween, and brought up the Motion Editor. I'm looking for Rotation X and Rotation Y, but only see Rotation Z. My Publish Settings are Flash Player 10, ActionScript 3.
View 2 RepliesWhen I try to insert a keyframe in Motion Editor, Flash CS5 crashes.I tried to use two computers running the same Mac OS X 10.5.8 with the same specs and only one of the machines crashes.
View 1 RepliesI'm making a "master movie" for an assignment and I'm stuck right now. What I've got is an Intro page that will serve at the Parent.swf to load 4 other child swf's upon a mouse click. The problem is I have a theater stage where I tweened an animation to make it appear the curtain on the stage is going up but once it reaches it maximum height....the tween abruptly stops. I want it to HOLD there until a user clicks a button.
How would I make this happen? Here is the page in question: [URL]...
Is there a way to convert a classic tween to a motion tween?
View 0 RepliesHow do I add motion blur to a motion tween?
View 2 RepliesPut 2 identical tweens, 1 motion tween, the other classic tween.Are there any differences in the final weight (Kb) of the resulting .swf file?
View 1 Replies